nlbailey Posted October 14, 2008 Share Posted October 14, 2008 via chipset? why on earth would you choose that? of course you will have those issues... you were supposed to choose ichx ahci drivers (if your bios is set to ahci for sata ports-most likely u did or by default it is) or ichx no ahci (if you dont have ahci support which is unlikely) what does the archive (patches) you downloaded says ? 1.1.3a or 1.1.4? I used via chipset because the guide that I used for my initial install used via chipset files. So all I need to do is swap out via for the correct ahci files and it should work correctly? The version I have is 1.1.3a. Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-930606 Share on other sites More sharing options...
bgmrk Posted October 15, 2008 Share Posted October 15, 2008 Hey, great tutorial only i'm a little confused as to what to select on the customize screen. OS: Vista 32 bit + kalyway 10.5.2 - fresh install MOBO: P5B-VM CPU: Intel duo core 2.6Ghz (i believe) RAM: 2x 1gb HDD: 2x 75gb Video: ATI Radeon x1950 512mb Wireless: airlink 101 awll3026 Kernel: 9.2 sleep Any help on what options to select would be greatly appreciated. Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-930625 Share on other sites More sharing options...
Pon Mak Posted October 15, 2008 Share Posted October 15, 2008 hey Vampirce, I've already got it done. Thx anyway. The problem was the password for the root account. After adding a new pw to in, then I will be able to install the driver. Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-930714 Share on other sites More sharing options...
wilef Posted October 15, 2008 Share Posted October 15, 2008 Need some help here. I've got Kalyway's 10.5.1 installed on a Toshiba Satellite a135-s4467, but this combo update (after reading the directions carefully) causes endless reboots for my Leopard install. Booting with -x does nothing. I don't know if i'm choosing the wrong options or what. Help! Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-930716 Share on other sites More sharing options...
roy1971 Posted October 15, 2008 Share Posted October 15, 2008 Hello folks! Mysticus.... THANKS MAN!! I follow your instruction booting before install with "-v cps=1 maxmem=2048" and works PERFECT! I've use the following.... Check my hard, in case that you have some similar or the same. GOOD LUCK AMIGOS!! Roy Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-930726 Share on other sites More sharing options...
Mysticus C* Posted October 15, 2008 Author Share Posted October 15, 2008 nlbailey: told u what you are supposed to do, it is up to you to follow what i say, or back off and dont waste my time... bgmrk: kernel: vanilla 9.5.0 with fix or 9.4.0 stagexnu chipset: ichx ahci (if u can set sata ports to ahci mode, and jmicron disabled or run in ahci mode as well) else use ichx non ahci audio: try restore or one of the settings that fits your model network: restore first? not worked? try marvel... video: ati 1950 system func: smbios: mac pro, (unselect acpi option if you selected vanilla kernel, else dont touch it) should be ok... roy: why do you choose via? Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931033 Share on other sites More sharing options...
roy1971 Posted October 15, 2008 Share Posted October 15, 2008 Hi Mysticus, I don't know... maybe I have checked by accident, that can bother my system?? Cheers, Roy Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931089 Share on other sites More sharing options...
Mysticus C* Posted October 15, 2008 Author Share Posted October 15, 2008 Hi Mysticus, I don't know... maybe I have checked by accident, that can bother my system?? Cheers, Roy i dont think you need it at all... but should not bother you since you dont have via chipset... Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931095 Share on other sites More sharing options...
Bungo Posted October 15, 2008 Share Posted October 15, 2008 Hi Mysticus C* I've a problem with dvd drive. It stop respond after few minutes with disk inside (can't eject). Mobo: GA-G33M-DS2R CPU: C2D E6600 RAM: 4x1GB OCZ SpecOps 800MHz VGA: Quadro FX 570 (256 MB) HDD1, HDD2: WD 40 SATA HDD3: Seagate 400 SATAII DVD: Liteon LH-20A1S SATA All sata in AHCI mode, JMicron onboard ATA disabled, Installed from retail dvd using BOOT-132 disk, updeted to 10.5.1 first and next to 10.5.4 Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931127 Share on other sites More sharing options...
Mysticus C* Posted October 15, 2008 Author Share Posted October 15, 2008 Hi Mysticus C* I've a problem with dvd drive. It stop respond after few minutes with disk inside (can't eject). Mobo: GA-G33M-DS2R CPU: C2D E6600 RAM: 4x1GB OCZ SpecOps 800MHz VGA: Quadro FX 570 (256 MB) HDD1, HDD2: WD 40 SATA HDD3: Seagate 400 SATAII DVD: Liteon LH-20A1S SATA All sata in AHCI mode, JMicron onboard ATA disabled, Installed from retail dvd using BOOT-132 disk, updeted to 10.5.1 first and next to 10.5.4 i dont know what really causes dvd to stop responding, maybe it is not fully ahci compliant... maybe the port it is connected have problem... change the port to another one and test... on gigabyte mobo (for example mine) some ports respond differently than the other ones... 0-1-2-3 ports has specific function to be able to backward compatible with pata standard... so it may be causing some issues with it... Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931136 Share on other sites More sharing options...
roy1971 Posted October 15, 2008 Share Posted October 15, 2008 Hi again, It's possible to make show the correct information on the Audio in 'System profiler'? It show Audio (Build-in) as "No Built-in Audio" Thanks in advance! Roy Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931171 Share on other sites More sharing options...
StephenC Posted October 15, 2008 Share Posted October 15, 2008 Quick question....can I do the upgrade to 10.5.5 over again? I chose the 9.5 Vanilla kernel with shutdown fix and now my system will not completly shutdown. (all fans lights etc... still running) I never had that issue before. If yes, which Kernel would be best (you think) for my system config. Thanks! Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931174 Share on other sites More sharing options...
pateras Posted October 15, 2008 Share Posted October 15, 2008 hizzz,i have tried 5 times with the pre & post update i have the same problem :no keyboard ,no trackpad 2 times 1 time for 1 hour i saw the grey screen and 2 times PANIC! :-) it told me to hold down the power button....etc my laptop is: hp dv6755el with: core2duo t7500 2,20gh code name merom memory 3072 mainboard quanta 30d2 geforce 8400m gs tsstcorp cddvd bthw thanks guys for the GOOOD work!!! Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931310 Share on other sites More sharing options...
Bungo Posted October 15, 2008 Share Posted October 15, 2008 i dont know what really causes dvd to stop responding, maybe it is not fully ahci compliant... maybe the port it is connected have problem... change the port to another one and test... on gigabyte mobo (for example mine) some ports respond differently than the other ones... 0-1-2-3 ports has specific function to be able to backward compatible with pata standard... so it may be causing some issues with it... Tried different combinations, various of kexts, no results. I've the same problem with GA-G33-DS3R. Both mobos has ICH9R SouthBridge. Wchich ports are you using for drives? Nobody noticed that issue yet? Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931460 Share on other sites More sharing options...
Euthenics Posted October 15, 2008 Share Posted October 15, 2008 Works fine on a Pentium D processor with Intel 955 XBK motherboard. Hope that helps for someone who wants to know if it works with the same specs. Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931653 Share on other sites More sharing options...
Victor Gil Posted October 15, 2008 Share Posted October 15, 2008 I got a problem with the update, I follow all the instructions but it keeps restarting, i had try -s, -x but nothing... My spec in my signature.... Please Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931722 Share on other sites More sharing options...
MichalK Posted October 15, 2008 Share Posted October 15, 2008 I had the same problem with my 88e8053 Lan when I tried upgrading to 10.5.5 and ended up reverting to 10.5.3. I couldn't find any kexts that made a difference. There's some discussion of this issue b/w mysticus and ljseinfeld starting with post #1149, but I don't think there's a solution yet. I managed to get the network working with AppleYukon.kext (the old one from Tiger) instead of AppleYukon2.kext (from Leo). For some reason, AppleYukon2.kext did worked correctly with 10.5.2 and NOT with 10.5.5, so probably it's some dependency problem. Michal Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931816 Share on other sites More sharing options...
newsman1 Posted October 15, 2008 Share Posted October 15, 2008 Hi, Hi Mysticus C* can you please check my laptop spec on my Signature i just want to know if it will be ok with no problems. because i tried to update to 10.5.5 using the iDeneb v1.3 and i had too many problems no audio and bad video. for audio on kalyway 10.5.2 i left the defualt, witdh mean Intel NVIDIA VIA ATI HDAudioController NVIDIAAC97Audio Realtek Sigmatel ConexantAnalogDevicesHDAudioCodec all 3 was check it off, but i am not sure witch one that make audio to work. need your help please. thanks, Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931916 Share on other sites More sharing options...
Mysticus C* Posted October 15, 2008 Author Share Posted October 15, 2008 Hi, Hi Mysticus C*can you please check my laptop spec on my Signature i just want to know if it will be ok with no problems. because i tried to update to 10.5.5 using the iDeneb v1.3 and i had too many problems no audio and bad video. for audio on kalyway 10.5.2 i left the defualt, witdh mean Intel NVIDIA VIA ATI HDAudioController NVIDIAAC97Audio Realtek Sigmatel ConexantAnalogDevicesHDAudioCodec all 3 was check it off, but i am not sure witch one that make audio to work. need your help please. thanks, newsman and victor gil both of you read this if you are not afraid to try and learn new things... read the post#1 regarding brick free system preparation... if you do that, use following partition scheme... 25-25-50-25-25 (GB)(victor gil, use normal suggestions in the guide for partitioning) , (1-2-3 will be primary and 4-5-6 will be automatically secondary, 1 for main osx-journaled, 2 for linux-dos?, 3 for vista-dos, 4 for linux-dos? 5- for osx clone-journaled) if you do the cloning right, you can test the things u want before applying them, so u ll know b4 hand the results, without bricking system... do what i say above, and than make sure u understand how it works... after that... u can try these settings (from 1.1.4 package)... kernel: 9.5.0 vanilla with fix, or stagexnu chipset: ichx ahci (if ahci supported by ur mobo) if not, use ichx non ahci audio: restore network: restore video: intel gma 950-3100 laptop version (make sure u dont select desktop ones... 950 and 3100 has one laptop package, but both has different desktop package) system func: smbios: macbook, (unselect acpi if u selected the vanilla kernel), ps2-keyb trackpad fix, that should be it... Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-931992 Share on other sites More sharing options...
newsman1 Posted October 16, 2008 Share Posted October 16, 2008 thanks for the quick reply. where do i get the 1.1.4 package i am not afraid to brick my system all what i have to do is do a fresh install again, i love testing so i do not mind doing crazy stuff to get my system to work the way it should be. thanks, Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-932109 Share on other sites More sharing options...
ucf713 Posted October 16, 2008 Share Posted October 16, 2008 Worked perfect with 1.1.4 package. Thanks. Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-932274 Share on other sites More sharing options...
dragoniz Posted October 16, 2008 Share Posted October 16, 2008 Hi again Mysticus *C, Just an update, I have tried a few customization combination regarding USB 2.0 fix and the PS2-battery meter-power management fix and found out that no matter how I update without the PS2-batt...fix I'll end up freeze in the grey apple screen, and when I take a close look during the update -v boot the a yellow error line siad something about applepowermanagemnt.kext not properly load, so I should have checked the PS2-batt...fix in the first place, sorry for the wrong info man... But no matter how I install it, my keyboard and track pad still screwd, so I installed a virtual keyboard program and reintall kext from Blue-K and voila... the keyboard and the track pad working like charm.... Now my 10.5.5 working quite flawless (input sound and webcam still no go), thanks a bunch Mysticus*C Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-932334 Share on other sites More sharing options...
newsman1 Posted October 16, 2008 Share Posted October 16, 2008 yah that a no go for me Mysticus C* i used the steps you had on your last post kernel: 9.5.0 vanilla with fix, or stagexnu chipset: ichx ahci (if ahci supported by ur mobo) if not, use ichx non ahci audio: restore network: restore video: intel gma 950-3100 laptop version (make sure u dont select desktop ones... 950 and 3100 has one laptop package, but both has different desktop package) system func: smbios: macbook, (unselect acpi if u selected the vanilla kernel), ps2-keyb trackpad fix, that should be it... but that give me the grey screen with the apple logo and every thing froze, and when i reboot with -x my trackpad and keyboard do not work. i did not try another way it was too late last night. now when i was trying to select the video patch all what i saw was gma900 2582 & gma900 2592, witch one is for my x3100 laptop. i am really sorry because i am been a pain but i am still on very first steps in OSx86 world. thanks, Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-932515 Share on other sites More sharing options...
Mysticus C* Posted October 16, 2008 Author Share Posted October 16, 2008 which version of archieve you are using? latest is 1.1.4 (page 72,post 1424) http://img410.imageshack.us/img410/3442/updatern7.png check the pic above to see the options, in intel there is gma950 3100 option... are you sure you are following the correct steps?? you have intel chipset, you should not be having freeze or gray screen unless you are not following the step by step guide!!!!!!! Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-932568 Share on other sites More sharing options...
StephenC Posted October 16, 2008 Share Posted October 16, 2008 Quick question....can I do the upgrade to 10.5.5 over again? I chose the 9.5 Vanilla kernel with shutdown fix and now my system will not completly shutdown. (all fans lights etc... still running) I never had that issue before. If yes, which Kernel would be best (you think) for my system config. Thanks! Anyone? at least on the "can I reinstall this update and choose another kernel" question. Thanks Link to comment https://www.insanelymac.com/forum/topic/109102-complete-updates-for-newbies-and-all-currently-1055-combo-only-intel-cpus/page/64/#findComment-932640 Share on other sites More sharing options...
Recommended Posts