67 replies to this topic

[Mac Boy]

lazydesi, on Apr 16 2008, 10:23 PM, said:

I installed 10.4.8 now looking to update 10.4.8, so can i go directly to 10.4.11 rev 2 by skipping the previous versions?

It's not an updater, and it doesn't require any previous version. So, yes, you can simply install 10.4.11. You can even install to another partition and have both 10.4.11 and 10.4.8 on the same disk, which is what I do while evaluating new releases.

[lazydesi]

Mac Boy, on Apr 18 2008, 07:16 AM, said:

It's not an updater, and it doesn't require any previous version. So, yes, you can simply install 10.4.11. You can even install to another partition and have both 10.4.11 and 10.4.8 on the same disk, which is what I do while evaluating new releases.

thanks for the reply

i d/l 10.4.8 which is 4.3GB in size , but this new install is just 2.5GB in size, any differences?

[Mac Boy]

First, the ISO is compressed with RAR. Uncompressed it's actually about 3.1GB. Second, there are some uneeded drivers and fonts that have been removed. So it's has been cut down with stuff that most users will never miss. And at the same time it has many, many drivers and additional programs that make it work better for mere PC users. And we don't have to go hunt them down and download them separately.

So basically it's smaller, better, and customized for us. This has been the best release that I have has the pleasure to use.

[lazydesi]

tried to install XXX 10.4.11 last night - but I am unsuccessful on my Acer 5315 -

put the dvd into the drive and restarted the system, it started installation and halfway my system shutdowns randomly.

I am not sure what the problem is.

at last tried to install with JaS 10.4.8  , same problem halfway installation is fine -and shutdown middle way.

No success with the 10.4.11, 10.4.8

I am using Intel celeron M 550 @ghz processor and Intel x3100 graphic card
any help

[BlueAvenue]

Use  Uphuck 10.4.9

[lazydesi]

BlueAvenue, on Apr 19 2008, 11:33 PM, said:

Use  Uphuck 10.4.9

i will try mate

some other member is having the similar problem i am facing

http://forum.insanel...showtopic=75578

[psyche08]

tried to install XXX 10.4.11 this weekend ,but I am unsuccessful
my notebook:
CPU:Intel Celeron M 520 (1.5 GHz)
MainBoard:Intel 945GM
MEM:533Mhz DDR 1536MB
GFX:Intel G950
LAN:broadcom  440X

Could you please give me some clue for install..
Thank you

[Kwaaku]

Installed 10.4.11 with 10.4.8 Universal Kernel AOK.

Had been trying to use the 10.4.11 kernel for ages now, seems like one obstacle after another. So I used the 10.4.8 universal kernel, almost problem free.

These are the ioptions I used:
10.4.11 updates -all
10.4.8 universal kernel (all 3 options)
all recommended kexts (I left out CPUPowerManagement kext remover as I have HPET)
all no-efi kexts
ATI 7500 Pack
AGPGart1.1
chun_nan IOPCI kext

I can also confirm that the ATI 7500 pack works very well (other versions I found before had been modified so they dont work without tweaking). If I install to 10.4.8 with ATI 7500 pack, QE enables from the start.
If I Install to 10.4.11 with 10.4.8 unversal kernel, minor tweaks needed (ethernet, sound & AGP werent working) specifically:

1)switched  IONetworkingFamily.kext, AppleHDA.kext & appleAC97 with the older  versions -taken from a JaS 10.4.8 ppf1 & ppf2 dvd.
2)edit the Info.plist inside AGPGart.kext to show your IONameMatch vendor & device ID's. for my T42 that was
<string>pci8086,3341</string>. That is for a ATI Radeon Mobility 7500 32Mb M7 LW card.

[i][b]Quote BlackCH[/b][/i]
Now lets understand something:
You cannot run kalyway EFI and XxX no-efi at the same time in the same HD. My guess is that Leo panics because now theres no EFI bootloader in your HD (you install the no-efi-darwin with Tiger).

Actually I got efi & no-efi installs running quite well on the same  disc. just installed pc_efi_v8 in my linux partition, to run  Leopard_efi I just call pc_efi bootloader from GRUB. To run  Tiger_no-efi I just chainload it from GRUB. That was always my plan,  couldn't ever understand the logic of why it "can't work".

Maybe i'm missing something but I now have a quite flexible multimedia setup which I what I was aiming at.

my only problems now, cant use QE output in vlc player. DVD player plays but shows blank screen, vlc player can play them but drops 2 out of 3 frames. USBUHCI debug driver registered, have had that on every install Ive tried I think, cant seem to get around it, USBEHCI is fine.

I was always really impressed by this dvd, now I know to use the 10.4.8 kernel it installs even easier than the JaS dvd.


Many thanks BlackCH, I am now happy enough to stop endlessly tweaking.

[rals2007]

BlackCH:

Installed bluetooth with no problem ( working).

But, i dont have any option to turn it OFF in System Profiler. There is no option for me to click the "Turn Off".

How could i fix this?

[uniqueOSX]

I tried TPB today and couldn't find it.

[riws]

BlackCH
On the DVD is Classic for Intel, but its not in Installer, why?

[BlackCH]

riws, on May 2 2008, 01:14 PM, said:

BlackCH
On the DVD is Classic for Intel, but its not in Installer, why?

It didnt work. I left it there in case I find a solution, but I havent look to it yet

[rexzooly]

Hi on i am a noob at all this i have tried findong the download but i can't find it
My system is:
Dual Core 1.8
Biostar 7050 nvdia motherboard
and chipset
140 gig hdd
2 gig ramm

Will this work on this spec and can anyone help me with
where and how to find it.
i have trued to find it so many times and just fails and also
will this work on a 20 gig hdd as i don't want to lose all my work on my 140.

[yusofu]

Well,
Congrats to anyone with success installs.

Attempt #1.
I tried to install on Acer Aspire AMD T180-X42.
1x WD250 PATA IDE - 4 partitions (Vista/XP/Partition For OSX and 1xFAT32)
1x Hitachi HT250 SATA - 4 Partitions (3x NTFS partitions and 1 FAT32)
Upon boot the XxX 10.4.11 displays continuous wild text as "UNKNOWN SIGSEGV Code 0" until I power off the system.

Attempt #2.
I love to have this 10.4.11 for it's Brushed Metal GUI - then I made some attempts to another PC C2Q6600 [3 Hdd = 10 partitions Vista/XP/+user files at other partitions but this time it displays "waiting for root device".

Attempt #3.
I end-up installing Leo4Allv3 then erase because it does not display on my old 15" Samsung LCD.

Attempt #4.
I burn again this 10.4.11 with 4x speed - no luck - same "SIGSEVG ... " thingy. Lastly I opted to install Kalyway 10.5.2 and works perfectly on Abit IP35E.

I really love to have this 10.4.11 Tiger to work on any of the above machine Intel/AMD and I would like members to advise me for the two error messages above as where do I go wrong.

Please, Thank You.

[TETELINBUBU]

I AM NEW ON THIS ,I DOWNLOADED THE XXX 10.4.11 TORRENT INSTALL REV 2.0 BUT I FIND MANY FILES NAMED FROM 1 TO 23 WHTA I HAVE TO DO TO CREATE A INSTALL DVD
SORRY FOR THAT SIMPLE QUESTION

[BlackCH]

yusofu, on May 6 2008, 03:08 PM, said:

Well,
Congrats to anyone with success installs.

Attempt #1.
I tried to install on Acer Aspire AMD T180-X42.
1x WD250 PATA IDE - 4 partitions (Vista/XP/Partition For OSX and 1xFAT32)
1x Hitachi HT250 SATA - 4 Partitions (3x NTFS partitions and 1 FAT32)
Upon boot the XxX 10.4.11 displays continuous wild text as "UNKNOWN SIGSEGV Code 0" until I power off the system.

Attempt #2.
I love to have this 10.4.11 for it's Brushed Metal GUI - then I made some attempts to another PC C2Q6600 [3 Hdd = 10 partitions Vista/XP/+user files at other partitions but this time it displays "waiting for root device".

Attempt #3.
I end-up installing Leo4Allv3 then erase because it does not display on my old 15" Samsung LCD.

Attempt #4.
I burn again this 10.4.11 with 4x speed - no luck - same "SIGSEVG ... " thingy. Lastly I opted to install Kalyway 10.5.2 and works perfectly on Abit IP35E.

I really love to have this 10.4.11 Tiger to work on any of the above machine Intel/AMD and I would like members to advise me for the two error messages above as where do I go wrong.

Please, Thank You.

This disc is INTEL only. And the 2nd computer you tryed probably has an unsupported HD/IDE controller.

[sleepy_yellow]

please keep seeding, i have 0 seeds...

thanks for the release!!!

[Fatherless One]

HELP!!!

After mixed results with a Leopard install I've decided to re-install the 10.4.11, the problem is I can't remember for the life of me (after many attempts) which kext, kernel and EFI to select, help is appreciated

My motherboard is a Gigabyte GA-945GCMX-S2 (for this I select ICH7, RLT8110, ALC888 and GMA950) and my processor is an Intel E6600 Core 2 Duo.

Thanks in advance.

[BlackCH]

Fatherless One, on May 10 2008, 12:20 PM, said:

HELP!!!

After mixed results with a Leopard install I've decided to re-install the 10.4.11, the problem is I can't remember for the life of me (after many attempts) which kext, kernel and EFI to select, help is appreciated

My motherboard is a Gigabyte GA-945GCMX-S2 (for this I select ICH7, RLT8110, ALC888 and GMA950) and my processor is an Intel E6600 Core 2 Duo.

Thanks in advance.

Get the lastest revision (2.0). Try:
SSE3 EFI or SSE3 EFI vanilla (MBR/GUID, depending on your hd scheme)
from the 'Base Install Combos' menu.

on top of this add:
GMA950
ALC888 (3 or 6 ports)
RTL 1000 (maybe)
ICH7 is supported out of the box

[pitap]

I see that there is 8 series driver/injector included in the install disc. I am just wondering does that mean cards like 8800GT would work with 10.4.11?  

Many thanks for answering this question.