Jump to content

CardBus/PCMCIA PC Cards for Leopard


  • Please log in to reply
1070 replies to this topic

#41
fingerr

fingerr

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 260 posts
  • Gender:Male
  • Location:Poland

mariusz:
which pcmcia controller do you have?
in your signature i've noticed you have a nic intel pro 1000, can you tell me which model/vendor and how do you get it working?
i get kernel panic on mine. (intel pro 1000pm)

Hi,

my pcmcia is:
07:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
	   Subsystem: Toshiba America Info Systems Unknown device ff10
	   Flags: bus master, medium devsel, latency 168, IRQ 18
	   Memory at f0906000 (32-bit, non-prefetchable) [size=4K]
	   Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176
	   Memory window 0: 88000000-8bfff000 (prefetchable)
	   Memory window 1: 8c000000-8ffff000
	   I/O window 0: 00006000-000060ff
	   I/O window 1: 00006400-000064ff
	   16-bit legacy interface ports at 0001

and Lan adapter is:
Intel PRO 1000/PL 
PCI\VEN_8086&DEV_109A&SUBSYS_FF101179&REV_00\4&192AC53F&0&00E0

i'ts working out of the box, no change/kext modification was required.

Regards,
Mariusz.

#42
EqUaTe

EqUaTe

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 147 posts
  • Gender:Male
  • Location:Babylon 5

Hi EqUaTe,

I have updated rev5 and source code.

Chun-Nan



Hi Chun-Nan,

I've tried rev5 with hexediting - looks the same as rev4..
I also couldn't get IOPCCardFamily to build - I got an error about AbsoluteTime (and a couple of others, I can't remember the details at the moment though).
This is (obviously) different from with rev3.
EDIT: This was my fault - hadn't copied the modified source files in correctly. *whistles*
Will report back tomorrow. :D

I think I may need to leave off further work on this until Thursday - at the moment I only have wireless connectivity available, and only in other OS's than OSX.


Thanks for the efforts though, and I'll be keeping an eye on any updates :)


Thanks,

EqUaTe

Edited by EqUaTe, 16 January 2008 - 12:39 AM.


#43
~Eureka

~Eureka

    InsanelyMac Sage

  • Members
  • PipPipPipPipPipPip
  • 400 posts
Hi Mariusz, fakedotbr, and djmastera2000,

Here is another test IOPCIFamily. Try this one with IOPCCardFamily on rev5 and boot with "-s" to enter single user mode. Look for the string "IOPCIConfigurator debug: BUS: prim/sec/sub = ......." Don't make any change on info.plist.

Let me know the result. Don't forget to backup your original file before trying it. Thanks.

Chun-Nan

Attached File  IOPCIFamily_test2.zip   50.74KB   16 downloads

#44
fingerr

fingerr

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 260 posts
  • Gender:Male
  • Location:Poland

Hi Mariusz, fakedotbr, and djmastera2000,

Here is another test IOPCIFamily. Try this one with IOPCCardFamily on rev5 and boot with "-s" to enter single user mode. Look for the string "IOPCIConfigurator debug: BUS: prim/sec/sub = ......." Don't make any change on info.plist.

Let me know the result. Don't forget to backup your original file before trying it. Thanks.

Chun-Nan

Hi Chun-Nan,

find below result from test2 + rev5:

npvhash=4095hi mem tramps at 0xffe00000PAE enabledDarwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386standard timeslicing quantum is 10000 usvm_page_bootstrap: 510528 free pages and 13760 wired pagesmig_table_max_displ = 79Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.AppleACPICPU: ProcessorApicId=0 LocalApicId=0 EnabledAppleACPICPU: ProcessorApicId=1 LocalApicId=1 EnabledLoading security extension com.apple.nke.applicationfirewallLoading security extension com.apple.security.seatbeltcalling mpo_policy_init for mbSeatbelt MACF policy initializedSecurity policy loaded: Seatbelt Policy (mb)Loading security extension com.apple.security.TMSafetyNetcalling mpo_policy_init for TMSafetyNetSecurity policy loaded: Safety net for Time Machine (TMSafetyNet)Copyright © 1982, 1986, 1989, 1991, 1993	The Regents of the University of California. All rights reserved.MAC Framework successfully initializedusing 10485 buffer headers and 4096 cluster IO buffer headersIOAPIC: Version 0x20 Vectors 64:87ACPI: System State [S0 S3 S4 S5] (S3)Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.Starting AppleACPIPS2NubFound mouse PNP deviceAppleACPIPS2Nub startup completeIOPCIConfigurator debug: BUS: prim/sec/sub = 00:00:00 (before)IOPCIConfigurator debug: BUS: prim/sec/sub = 07:06:10 (after)mbinit: doneSecurity auditing service presentBSM auditing presentFrom path: "uuid", Waiting for boot volume with UUID 252724EC-A21D-3FC0-94F9-BCEC237771D7Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>IOPCCardBridge::start failedFireWire (OHCI) TI ID 803a PCI now active, GUID 00080da0d13f83df; max speed s400.Extension "com.apple.driver.iTunesPhoneDriver" has no explicit kernel dependency; using version 6.0.Extension "com.apple.iokit.IOBluetoothFamily" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.E:[AppleUSBBluetoothHCIController][FindInterfaces] mInt0InterruptMaxPacketSize = 16Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPIIXATARoot/PRID@0/AppleIntelICHxSATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/TOSHIBA MK1237GSX Media/IOFDiskPartitionScheme/Untitled 3@3BSD root: disk0s3, major 14, minor 2



--------- EDIT ---------

I've tried with rev3 which caused kernel panic (see attached picture).


Regards,
mariusz.

Attached Files


Edited by Mariusz, 15 January 2008 - 08:30 PM.


#45
fakedotbr

fakedotbr

    InsanelyMac Protégé

  • Members
  • Pip
  • 22 posts
Hi Chun-nan.

I got this

IOPCCardBridge::start failed


Thanks

#46
~Eureka

~Eureka

    InsanelyMac Sage

  • Members
  • PipPipPipPipPipPip
  • 400 posts

--------- EDIT ---------I've tried with rev3 which caused kernel panic (see attached picture).Regards,mariusz.

Thanks. All the value (prim/sec/sub) are 0 according to "IOPCIConfigurator debug: BUS: prim/sec/sub = 00:00:00 (before)". I tried to put value back and obviously it didn't work. I will keep looking for the reason.Chun-Nan

Hi Chun-nan.I got thisIOPCCardBridge::start failedThanks

Thanks.Chun-Nan

#47
monkeystar

monkeystar

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 2 posts
hi Chun-Nan:huh:
thank you first for your good works. i wonder if my Texas Instruments PCIxx12 Cardbus/PCMCIA Controller on acer aspire 5570 can work with your IOPCCardFamily_chunnan_rev? if it could, which IOPCCardFamily_chunnan_rev can do? IOPCCardFamily_chunnan_rev3? or IOPCCardFamily_chunnan_rev5? thank you very much. i've got kernel panic too many times, almost give it up.

#48
~Eureka

~Eureka

    InsanelyMac Sage

  • Members
  • PipPipPipPipPipPip
  • 400 posts
Hi guys,grunster seemed to overcome the issue of "IOPCCardBridge::checkBridgeBusIDs invalid sub/cardbus/pci settings of 0x0".http://forum.insanel...showtopic=81857Chun-Nan

hi Chun-Nan:huh: thank you first for your good works. i wonder if my Texas Instruments PCIxx12 Cardbus/PCMCIA Controller on acer aspire 5570 can work with your IOPCCardFamily_chunnan_rev? if it could, which IOPCCardFamily_chunnan_rev can do? IOPCCardFamily_chunnan_rev3? or IOPCCardFamily_chunnan_rev5? thank you very much. i've got kernel panic too many times, almost give it up.

Hi monkeystar,You can try rev5 first. When trying the rev5, make sure you replace both IOPCIFamily and IOPCCardFamily from rev5. Don't mix it with rev3 or it won't work.If you have tried to make your pccard work by replacing other kexts, make sure you restore them before trying the rev5.Chun-Nan

mariusz:which pcmcia controller do you have?in your signature i've noticed you have a nic intel pro 1000, can you tell me which model/vendor and how do you get it working?i get kernel panic on mine. (intel pro 1000pm)Chun Nan:rev 3 for me works quite good but sometimes i get kernel panic when pcmcia is plugged in dawin startupif leo is already booted, and i plug the pcmcia sometimes the pc freezes and i can only switch off the computerquestion: what about the device memory and i/o? does they need to be changed with my linux/windows memory dumps?or i should leave the default values? do you suggest to use rev 5?

Hi snam11,You can try rev5 to see if it works better.I don't think changing device memory and i/o will make any difference but you can try. I have made it to use "ACP2,1" as default on the rev5.While using the rev5, make sure you replace both IOPCIFamily and IOPCCardFamily from the rev5 at the same time.Chun-Nan

#49
~Eureka

~Eureka

    InsanelyMac Sage

  • Members
  • PipPipPipPipPipPip
  • 400 posts
Hi Mariusz, fakedotbr, and djmastera2000,

Here is the test3 IOPCIFamily. Try this one with IOPCCardFamily on rev5 and boot with "-s" to enter single user mode. Don't make any change on info.plist.

Let me know the result. Don't forget to backup your original file before trying it. Thanks.

Chun-Nan

Attached File  IOPCIFamily_test3.zip   49.93KB   46 downloads


#50
fingerr

fingerr

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 260 posts
  • Gender:Male
  • Location:Poland

Hi Mariusz, fakedotbr, and djmastera2000,

Here is the test3 IOPCIFamily. Try this one with IOPCCardFamily on rev5 and boot with "-s" to enter single user mode. Don't make any change on info.plist.

Let me know the result. Don't forget to backup your original file before trying it. Thanks.

Chun-Nan

Hi Chun-Nan,

PCMCIA slot is recognized!!! ... but USB PCMCIA adapter is not :D

Here is dmesg for it:
mbinit: doneSecurity auditing service presentBSM auditing presentStarting AppleACPIPS2NubFound mouse PNP deviceAppleACPIPS2Nub startup completeFrom path: "uuid", Waiting for boot volume with UUID 252724EC-A21D-3FC0-94F9-BCEC237771D7Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.  added bridge 0x449a400 bus 7:7 to index 1  added bridge 0x44c2800 bus 5:6 to index 2  added bridge 0x44ad800 bus 3:4 to index 3  added bridge 0x4582400 bus 2:2 to index 4  added bridge 0x4474400 bus 1:1 to index 5  added bridge 0x44b4000 bus 0:0 to index 6  added bridge 0x44b1400 bus 0:0 to index 1pciBridgeCheckConfiguration(bus 7, state 0)pciBridgeAllocateResource(bus 7, state 0)Allocating resources on bus 7root bridge resource MEM f0900000 len 100000root bridge resource PFM fff00000 len 200000root bridge resource I/O f000 len ffff2000root bridge resource BUS 7 len 1  clipped bridge MEM range head to f0904000:fc000 for f0900000:4000 overlap 4000  MEM: sub-range outside parent range: 0xf0900000:0x4000  MEM: 2 sub-range limited to 7d380 each  I/O: 1 sub-range limited to ffff2000 each  BUS: 1 sub-range limited to 0 each  MEM: allocated block f0906000:1000pciBridgeDistributeResource(bus 7, state 2)Enabling bridge serving bus 7  Bridge Control    = 0000  Bridge Command    = 00100007Distribute resources for bus 7  BUS: total size 0, required size 1, maximize count 1  BUS: assigned block 8:1Applying config for device 7:6:3  bar 0x10 = f0905800  Device Command = 02100000  changed LT to 64 PCI clocksApplying config for device 7:6:2  bar 0x10 = f0904000  Device Command = 02100000  changed LT to 64 PCI clocksApplying config for device 7:6:1  bar 0x10 = f0905000  bar 0x14 = f0900000  Device Command = 02100000  changed LT to 64 PCI clocksApplying config for bridge serving bus 8  MEM: start/size = 00000000:00100000  I/O: start/size = 00000000:00001000  BUS: start/size = 00000008:00000001  Regs:  BUS: prim/sec/sub = 07:08:08Enabling bridge serving bus 8  Bridge Command    = 02100000  changed LT to 64 PCI clocks  changed SEC-LT to 64 PCI clocksPCI configuration changed (bridge=0 device=3 yenta=1)IOPCCard info:   Intel PCIC probe:   TI XX12 rev 00FireWire (OHCI) TI ID 803a PCI now active, GUID 00080da0d13f83df; max speed s400.IOPCCard info:   cs: cb_alloc(bus 8): unable to create cardbus nub for socket 0Extension "com.apple.iokit.IOBluetoothFamily" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.E:[AppleUSBBluetoothHCIController][FindInterfaces] mInt0InterruptMaxPacketSize = 16Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPIIXATARoot/PRID@0/AppleIntelICHxSATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/TOSHIBA MK1237GSX Media/IOFDiskPartitionScheme/Untitled 3@3BSD root: disk0s3, major 14, minor 3IOPCCard: shutting down socket 0. [u]<strong class='bbc'>[THIS IS when I remove USB adapter]</strong>[/u]IOPCCard info:   cs: cb_alloc(bus 8): unable to create cardbus nub for socket 0 [u]<strong class='bbc'>[THIS IS when I instert USB adapter]</strong>[/u]Extension "com.apple.driver.iTunesPhoneDriver" has no explicit kernel dependency; using version 6.0.

You are preety close man!! Very good job!!

Regards,
Mariusz.

#51
monkeystar

monkeystar

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 2 posts
thanks a lot good Chun-Nan. i'll try it soon

#52
fakedotbr

fakedotbr

    InsanelyMac Protégé

  • Members
  • Pip
  • 22 posts
I tested a version test3 along with the version 5.

He has returned something more interesting now.

But it is not working and not appearing in the System Profiler.


dmesg orig rev5:

d com.apple.kpi components; use only one style.
ACPI CA 20060421
AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Loading security extension com.apple.nke.applicationfirewall
Loading security extension com.apple.security.seatbelt
calling mpo_policy_init for mb
Seatbelt MACF policy initialized
Security policy loaded: Seatbelt Policy (mb)
Loading security extension com.apple.security.TMSafetyNet
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 7864 buffer headers and 4096 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [S0 S3 S4 S5] (S3)
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Extension "com.apple.driver.ApplePCIConfigurator" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
mbinit: done
Security auditing service present
BSM auditing present
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
IOPCIConfigurator debug: BUS: prim/sec/sub = 00:00:00 (before)
IOPCIConfigurator debug: BUS: prim/sec/sub = 07:06:10 (after)
From path: "uuid", 
Waiting for boot volume with UUID AE987864-7771-3CF7-924F-C09C825AFABC
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Debug driver registered: AppleUSBUHCI
IOPCCardBridge::start failed
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPIIXATARoot/PRID@0/AppleIntelICHxSATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2160BT PL FUJITSU MHV2160BT PL/IOFDiskPartitionScheme/Untitled 2@2
BSD root: disk0s2, major 14, minor 2
FireWire (OHCI) TI ID 803a PCI now active, GUID 00080da0d1581295; max speed s400.
Jettisoning kernel linker.
Resetting IOCatalogue.
GFX0: family specific matching fails
display: family specific matching fails
Matching service count = 2
Matching service count = 4
Matching service count = 4
Matching service count = 4
Matching service count = 4
Matching service count = 4
ACPI_SMC_CtrlLoop::initCPUCtrlLoop - pmCPUControl (PMIOCSETPSTATETABLE) returned 0x3bece00
GFX0: family specific matching fails
display: family specific matching fails
GFX0: family specific matching fails
display: family specific matching fails
ApplePS2Trackpad: Synaptics TouchPad v6.2
ALCinject: Starting.
ALCinject: Setting built-in=<data not shown>
ALCinject: Setting layout-id=<data not shown>
Intel82557: Self test reports invalid ROM contents
Intel82557: Self test reports internal register failure
Intel82557: Self test reports serial subsystem failure
Intel82557: Self test failed
GFX0: family specific matching fails
display: family specific matching fails
GFX0: family specific matching fails
dsmos: Initializing...
dsmos: Hook and decryption contexts set!
dsmos: Starting...
Intel82557: Ethernet address 00:a0:d1:58:12:95
GFX0: match category IOFramebuffer exists
NTFS driver 2.0 [Flags: R/O].
NTFS volume name , version 3.1.
display: Not usable
hfs_swap_BTNode: invalid forward link (0xe26f62ed >= 0x00002f80)
node=10927 fileID=4 volume=MacOSX86 device=/dev/disk0s2
		 0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType FS] [MountPt /] 
HFS: Runtime corruption detected on MacOSX86, fsck will be forced on next mount.
FindNextLeafNode: Error from hfs_swap_BTNode (node 10927)
Resetting IOCatalogue.
Resetting IOCatalogue.
Resetting IOCatalogue.
Resetting IOCatalogue.
Resetting IOCatalogue.
Resetting IOCatalogue.


dmesg rev5 + test3 in boot -s

t for Time Machine (TMSafetyNet)
Loading security extension com.apple.nke.applicationfirewall
Loading security extension com.apple.security.seatbelt
calling mpo_policy_init for mb
Seatbelt MACF policy initialized
Security policy loaded: Seatbelt Policy (mb)
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 7864 buffer headers and 4096 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [S0 S3 S4 S5] (S3)
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Extension "com.apple.driver.ApplePCIConfigurator" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
mbinit: done
Security auditing service present
BSM auditing present
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
  added bridge 0x2f2e800 bus 7:7 to index 1
  added bridge 0x2f05400 bus 5:6 to index 2
  added bridge 0x2f18800 bus 3:4 to index 3From path: "uuid", 
Waiting for boot volume with UUID AE987864-7771-3CF7-924F-C09C825AFABC
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

  added bridge 0x2fc7c00 bus 2:2 to index 4
  added bridge 0x2efdc00 bus 0:0 to index 5
  added bridge 0x2f2ec00 bus 0:0 to index 1
pciBridgeCheckConfiguration(bus 7, state 0)
pciBridgeAllocateResource(bus 7, state 0)
Allocating resources on bus 7
root bridge resource MEM dc000000 len 100000
root bridge resource PFM fff00000 len 200000
root bridge resource I/O 4000 len 1000
root bridge resource BUS 7 len 1
  clipped bridge I/O range head to 4040:fc0 for 4000:40 overlap 40
  clipped bridge MEM range head to dc004000:fc000 for dc000000:4000 overlap 4000
  I/O: sub-range outside parent range: 0x4000:0x40
  MEM: sub-range outside parent range: 0xdc000000:0x4000
  MEM: 2 sub-range limited to 7cb80 each
  I/O: 1 sub-range limited to fc0 each
  BUS: 1 sub-range limited to 0 each
  MEM: allocated block dc007000:1000
pciBridgeDistributeResource(bus 7, state 2)
Enabling bridge serving bus 7
  Bridge Control	= 0000
  Bridge Command	= 00100007
Distribute resources for bus 7
  BUS: total size 0, required size 1, maximize count 1
  BUS: assigned block 8:1
Applying config for device 7:8:0
  bar 0x10 = dc005000
  bar 0x14 = 4000
  Device Command = 02900000
  changed LT to 64 PCI clocks
Applying config for device 7:6:3
  bar 0x10 = dc006800
  Device Command = 02100000
  changed LT to 64 PCI clocks
Applying config for device 7:6:2
  bar 0x10 = dc004000
  Device Command = 02100000
  changed LT to 64 PCI clocks
Applying config for device 7:6:1
  bar 0x10 = dc006000
  bar 0x14 = dc000000
  Device Command = 02100000
  changed LT to 64 PCI clocks
Applying config for bridge serving bus 8
  MEM: start/size = 00000000:00100000
  I/O: start/size = 00000000:00001000
  BUS: start/size = 00000008:00000001
  Regs:
  BUS: prim/sec/sub = 07:08:08
Enabling bridge serving bus 8
  Bridge Command	= 02100000
  changed LT to 64 PCI clocks
  changed SEC-LT to 64 PCI clocks
PCI configuration changed (bridge=0 device=4 yenta=1)
IOPCCard info:   Intel PCIC probe:   TI XX12 rev 00
Debug driver registered: AppleUSBUHCI
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPIIXATARoot/PRID@0/AppleIntelICHxSATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2160BT PL FUJITSU MHV2160BT PL/IOFDiskPartitionScheme/Untitled 2@2
BSD root: disk0s2, major 14, minor 2
FireWire (OHCI) TI ID 803a PCI now active, GUID 00080da0d1581295; max speed s400.
IOPCCard info:   cs: cb_alloc(bus 8): unable to create cardbus nub for socket 0

Thank you for the great work.

#53
omegard

omegard

    InsanelyMac Protégé

  • Members
  • Pip
  • 15 posts
Chun,

This works great for me on my Gateway NX860XL using rev5 + test3 my wifi pcmcia card is recongized. Thanks for your great work. It is much appreciated.

#54
EqUaTe

EqUaTe

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 147 posts
  • Gender:Male
  • Location:Babylon 5
Hi Chun-Nan,

Managed to try a debug/devel version of rev5 this morning. I've attached the dmesg output.

Do you think it may be worth modifying the mem & io ranges? If so, what OS/linux distro would you recommend for getting them? (I've not had much luck getting consistent results..)


Cheers,
EqUaTe

Attached File  chunnan_rev5.dmesg.txt   3.81KB   42 downloads

#55
finetuned

finetuned

    InsanelyMac Protégé

  • Members
  • Pip
  • 45 posts
  • Location:Netherlands
  • Interests:Music
Thanks a lot, the last release made it work with my ToH with EFI v8 and Vanilla kernel, updated to 10.5.1!
My firewire PCMCIA card was recognized instantly, and no drivers were needed for it.

Specs in signature.


Thanks a lot!

#56
fakedotbr

fakedotbr

    InsanelyMac Protégé

  • Members
  • Pip
  • 22 posts

Thanks a lot, the last release made it work with my ToH with EFI v8 and Vanilla kernel, updated to 10.5.1!
My firewire PCMCIA card was recognized instantly, and no drivers were needed for it.

Specs in signature.


Thanks a lot!


Finetuned...

What you do?

You use test3 or rev5?
IOPCCardFamily or IOPCIFamily?

Thanks

#57
djmastera2000

djmastera2000

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 172 posts

Hi Mariusz, fakedotbr, and djmastera2000,

Here is the test3 IOPCIFamily. Try this one with IOPCCardFamily on rev5 and boot with "-s" to enter single user mode. Don't make any change on info.plist.

Let me know the result. Don't forget to backup your original file before trying it. Thanks.

Chun-Nan


I tested a version test3 along with the version 5.

He has returned something more interesting now.

But it is not working and not appearing in the System Profiler.

...


Cool, more output right now lol

Great work Chun-Nan!

So, now it's recognized but still doesn't function...same as fakedotbr.

And what's this now: IOPCCard info: cs: cb_alloc(bus 10): unable to create cardbus nub for socket 0, when my 3G device is inserted?

bash-3.2# dmesg
ge 0x38a9c00 bus 1:1 to index 6
  added bridge 0x391b000 bus 0:0 to index 7

Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.mbinit: done
Security auditing service present
BSM auditing present

Starting AppleACPIPS2Nub
Found mouse PNP device
AppleACPIPS2Nub startup complete
From path: "uuid", 
Waiting for boot volume with UUID 82D6143F-254A-36A9-A055-BFDAAA096A4F
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
  added bridge 0x3909000 bus 0:0 to index 1
pciBridgeCheckConfiguration(bus 9, state 0)
pciBridgeAllocateResource(bus 9, state 0)
Allocating resources on bus 9
root bridge resource MEM de000000 len 100000
root bridge resource PFM fff00000 len 200000
root bridge resource I/O f000 len ffff2000
root bridge resource BUS 9 len 1
  clipped bridge MEM range head to de002000:fe000 for de000000:2000 overlap 2000
  MEM: sub-range outside parent range: 0xde000000:0x2000
  MEM: 2 sub-range limited to 7ea00 each
  I/O: 1 sub-range limited to ffff2000 each
  BUS: 1 sub-range limited to 0 each
  MEM: allocated block de004000:1000
pciBridgeDistributeResource(bus 9, state 2)
Enabling bridge serving bus 9
  Bridge Control	= 0000
  Bridge Command	= 00100007
Distribute resources for bus 9
  BUS: total size 0, required size 1, maximize count 1
  BUS: assigned block a:1
Applying config for device 9:9:5
  bar 0x10 = de003400
  Device Command = 02100000
  changed LT to 0 PCI clocks
Applying config for device 9:9:4
  bar 0x10 = de003000
  Device Command = 02100000
  changed LT to 0 PCI clocks
Applying config for device 9:9:3
  bar 0x10 = de002c00
  Device Command = 02100000
  changed LT to 0 PCI clocks
Applying config for device 9:9:2
  bar 0x10 = de002800
  Device Command = 02100000
  changed LT to 64 PCI clocks
Applying config for device 9:9:1
  bar 0x10 = de002000
  Device Command = 02100000
  changed LT to 64 PCI clocks
Applying config for bridge serving bus 10
  MEM: start/size = 00000000:00100000
  I/O: start/size = 00000000:00001000
  BUS: start/size = 0000000a:00000001
  Regs:
  BUS: prim/sec/sub = 09:0a:0a
Enabling bridge serving bus 10
  Bridge Command	= 02100000
  changed LT to 64 PCI clocks
  changed SEC-LT to 64 PCI clocks
Applying config for device 9:5:0
  bar 0x10 = de000000
  Device Command = 00100000
  changed LT to 64 PCI clocks
PCI configuration changed (bridge=0 device=6 yenta=1)
IOPCCard info:   Intel PCIC probe:   Ricoh RL5C476 rev b4
FireWire (OHCI) VendorID 1180 ID 552 built-in now active, GUID 0000f04101054711; max speed s400.
IOPCCard info:   cs: cb_alloc(bus 10): unable to create cardbus nub for socket 0
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPIIXATARoot/PRID@0/AppleIntelICHxSATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/Hitachi HTS541616J9SA00 Hitachi HTS541616J9SA00/IOFDiskPartitionScheme/Untitled 2@2
BSD root: disk0s2, major 14, minor 2
Jettisoning kernel linker.
Resetting IOCatalogue.
IPv6 packet filtering initialized, default to accept, logging disabled
Matching service count = 1
Matching service count = 1
Matching service count = 1
Matching service count = 1
Matching service count = 1
Matching service count = 1
wl0: Broadcom BCM4312 802.11 Wireless Controller
4.170.25.8.2ACPI_SMC_CtrlLoop::initCPUCtrlLoop - pmCPUControl (PMIOCSETPSTATETABLE) returned 0x456ff80
NVDANV40HAL loaded and registered.
ApplePS2Trackpad: Synaptics TouchPad v6.2
ALCinject: Starting.
ALCinject: Setting built-in=<data not shown>
ALCinject: Setting layout-id=<data not shown>
dsmos: Initializing...
dsmos: Hook and decryption contexts set!
m0ead6f57 :2
m7b9b743c
dsmos: Starting...
AppleBCM440XEthernet: Ethernet address 00:13:77:29:d5:2d
AirPort_Brcm43xx: Ethernet address 00:19:7d:6b:2a:84
NTFS driver 2.0 [Flags: R/O].
NTFS volume name Vista, version 3.1.
NTFS volume name Program Files, version 3.1.
NTFS volume name Data, version 3.1.


#58
jon37325

jon37325

    InsanelyMac Protégé

  • Members
  • Pip
  • 13 posts
Hi need some help.

I am running an asus v6va with a ricoh set on the pcmcia bus. I need to know how exactly to get this working. I tried just loading the kext files and it gives me a panic at boot. Please a quick response.

#59
EqUaTe

EqUaTe

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 147 posts
  • Gender:Male
  • Location:Babylon 5

Hi need some help.

I am running an asus v6va with a ricoh set on the pcmcia bus. I need to know how exactly to get this working. I tried just loading the kext files and it gives me a panic at boot. Please a quick response.


Take a picture of the kernel panic, and attach it to a post.

Which rev did you try?


EqUaTe

#60
igyo

igyo

    InsanelyMac Protégé

  • Members
  • Pip
  • 26 posts
After installation rev5 (IOPCCardFamily) + test3(IOPCIFamily) i have in System Profiler FireWire Bus:

Warning: Update to list FireWire devices. :blink:

Sorry for my English...





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   Web hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy