1879 replies to this topic

[Nimpi]

You can change it in screensettings

if you dont can change it there you can add
<key>Graphics Mode</key>
<string>1440x900x32</string>  "change too the resolution you want"

in your com.apple.Boot.plist

write it under the <key>Boot Graphics</key>
                         <string>Yes</string>

[Scrizz]

x1950gt plz dev. ID 7288

[Bronya]

Nimpi, on Aug 6 2007, 09:48 AM, said:

First I installed jccools X1950XT driver then I istalled all kext from Bronyas x1950pro drivers but i dont installed ATINDRV.kext.. Then I installed atidisplays4-5-7 and then it worked for me :Pusing 10.4.10ID 7280 1002both QE/CI are working

Hello. I have taken from jccools X1950XT - does not work DVI and qe/ci!!! And ATINDRV.kext you can take another! And looking for whom works DVI and for whom does not work DVI!

ksong, on Aug 6 2007, 07:20 PM, said:

hello bronyahow can i changer the screen resolution like 1440x900?

Why it is necessary? There is a driver which it is possible to change resolution!

Scrizz, on Aug 6 2007, 07:58 PM, said:

x1950gt plz dev. ID 7288

Take here it. 7288 -->  x1950_pro_7288_dmitrik.zip   766.01K   894 downloadsYou test !

[ksong]

Bronya, on Aug 6 2007, 04:23 PM, said:

Hello. I have taken from jccools X1950XT - does not work DVI and qe/ci!!! And ATINDRV.kext you can take another! And looking for whom works DVI and for whom does not work DVI!Why it is necessary? There is a driver which it is possible to change resolution!Take here it. 7288 --> x1950_pr..._dmitrik.zipYou test !

because of my lcd screen use 1440x900

[Bronya]

ksong, on Aug 6 2007, 08:32 PM, said:

because of my lcd screen use 1440x900

The monitor means at you shows up to 1440x900 a maximum! At everyone different monitors.

At me a maximum 1920x1440

[ksong]

i use samsung 931bw ,the best resolution is 1440x900, but i can not find the 1440x900 in displaysettings

[Bronya]

ksong, on Aug 6 2007, 08:50 PM, said:

i use samsung 931bw ,the best resolution is 1440x900, but i can not find the 1440x900 in displaysettings

Try take natit.kext from jccools or Diabolik and edit info.plist!

You can download program DisplayConfigX and add resolution 1440x900 !!!

[krell]

Bronya, on Aug 6 2007, 05:23 PM, said:

Hello. I have taken from jccools X1950XT - does not work DVI and qe/ci!!! And ATINDRV.kext you can take another! And looking for whom works DVI and for whom does not work DVI!Why it is necessary? There is a driver which it is possible to change resolution!Take here it. 7288 --> x1950_pr..._dmitrik.zipYou test !

Bronya, I think Nimpi is right. I did it with my Powercolour 1950Pro AGP now.

1. Install jccools driver first, remove everything except ATINDRV.kext
2. Copy everything from your package except  ATINDRV.kext to /System/Library/Extensions

I have ATI  Displays 4.5.9 installed before these steps so I don't know whether it will cause any trouble.

I had kernal panic with AGPGart, once removed it everythink is just working fine! DVI with CI/QE full res!

Attached Files

•  ATI_1950Pro_AGP.jpg   214.07K   1009 downloads

[AaronR]

On this DVI out issue my guess is if your card has 1 VGA + 1 DVI then you are {censored} out of luck. Nimpi and Krell both have dual DVI out 1950pros.

To Nimpi and Krell, does dual display (extended desktop) work?

[ares1981]

Bronya, on Aug 6 2007, 04:23 PM, said:

Take here it. 7288 --> x1950_pr..._dmitrik.zipYou test !

won't work on

Display adapter ATI Radeon Graphics Processor (0x7288)
Core Name RV570
SubVendor Sapphire (P.C. Partner) (174B)
SubDevice E190
BUS 7
Device 0
Function 0
Base Address 0 E000000C
Base Address 1 00000000
Base Address 2 FD2F0004
Base Address 3 00000000
Bus Type PCI Express

with d-sub(via adaptor) shows white screen, with dvi - black screen

[krell]

AaronR, on Aug 7 2007, 04:24 AM, said:

On this DVI out issue my guess is if your card has 1 VGA + 1 DVI then you are {censored} out of luck. Nimpi and Krell both have dual DVI out 1950pros.

To Nimpi and Krell, does dual display (extended desktop) work?

Sorry I don't have another display at the moment.

[ksong]

krell, on Aug 7 2007, 12:15 AM, said:

Bronya, I think Nimpi is right. I did it with my Powercolour 1950Pro AGP now.

1. Install jccools driver first, remove everything except ATINDRV.kext
2. Copy everything from your package except ATINDRV.kext to /System/Library/Extensions

I have ATI Displays 4.5.9 installed before these steps so I don't know whether it will cause any trouble.

I had kernal panic with AGPGart, once removed it everythink is just working fine! DVI with CI/QE full res!

it everythink is just working fine! DVI with CI/QE full res!

but atidisplay not works,i use macosx 10.4.10

[Bronya]

ares1981, on Aug 7 2007, 11:13 AM, said:

won't work on

Display adapter ATI Radeon Graphics Processor (0x7288)Core Name RV570SubVendor Sapphire (P.C. Partner) (174B)SubDevice E190BUS 7Device 0Function 0Base Address 0 E000000CBase Address 1 00000000Base Address 2 FD2F0004Base Address 3 00000000Bus Type PCI Express

Forgive for a mistake, try here it  ATIRadeonX1000.kext.zip   356.27K   234 downloads

Quote

with d-sub(via adaptor) shows white screen, with dvi - black screen

Take mine atindrv.kext from the driver 7280, or take any natit.kext and atindrv.kext, and then check up!

krell , for me works DVI, but does not work qe/ci... Something at me not so.

[8ender]

This is fantastic. I'm going to try this out once I reinstall OSX. Kudos all around for not leaving us 1950 owners in the dark.

[Scrizz]

woot works on x1950gt (7288), use the atindrv from jcools package it works QE/CI for desired res set in com.apple.Boot.plist  
no extended desktop

[Scrizz]

  here's the package for the x1950gt:

 x1950_gt_7288.zip   1.08MB   615 downloads

don't forget to repair permissions

[THe KiNG]

ksong, on Aug 7 2007, 07:40 PM, said:

it everythink is just working fine! DVI with CI/QE full res!

but atidisplay not works,i use macosx 10.4.10

Works for me!
Clean install 10.4.10 AMD Test 01
DVI/all full/still pci(agpgart get me to krenel panic)

Thanks!!!

Edit:  I'm stupid...everything is ok except agpgart...

[Mafiose]

Hello,
3 month ago i wanted to install Jas 10.4.8 on my Core2duo E6300,Gigabyte ds4 with Asus x1950pro PCIE.
But i have seen, that x1950pro not supported....

and now you say it works?

Wich version of mac can i install? what is better for me? have somebody mac on Asus x1950pro pcie?

[Bronya]

Mafiose, on Aug 8 2007, 01:05 PM, said:

Hello,
3 month ago i wanted to install Jas 10.4.8 on my Core2duo E6300,Gigabyte ds4 with Asus x1950pro PCIE.
But i have seen, that x1950pro not supported....

and now you say it works?

Wich version of mac can i install? what is better for me? have somebody mac on Asus x1950pro pcie?

You can establish MacOSX any version from 10.4.4!!! Yes works without problems, you see pictures are a truth! Try!

To all  thanks for responses!

[Kevin Email]

Worked a treat for my Saphire X1950Pro 512Mb...  Thanks Allot!!  I did have to remove the nativit.kext before QE/QI worked and set my res in com.apple.boot.plist.  Also this is over the DVI Port...  Now only to get my second monitor working and I will be in hog heaven!!  THANKS!!!!!!!