82 replies to this topic

[lord_muad_dib]

coolbits, on Nov 6 2006, 12:26 PM, said:

0x00f910de

Is ok...

it's working flawlessly! thx!

[SquidCombo]

How to uninstall the driver? Doesn't work on my BFG 6600 GT PCI-E. I got jumbled up pixels and now I'm trying to uninstall it.

Edit:
To uninstall, boot with -s
Type the commands to mount the system file
/sbin/fscky -fy
/sbin/mount -uw /
Then either run ./uninstallerscript

[Tried]

will this work for a geforce mx 440?

[Kiko]

Quote

will this work for a geforce mx 440?

LOL, i told you this would happen, umm, the answer is as far as i can see, no.

Quote

How to uninstall the driver? Doesn't work on my BFG 6600 GT PCI-E. I got jumbled up pixels and now I'm trying to uninstall it.

boot into -s

 
mount -uw /
rm /system/extensions/natit.kext
rm /system/library/extensions.kextcache
rm /system/library/extensions.mkext
reboot

[SquidCombo]

haha, kiko, I just answered my own question, then when I refreshed, your answer came up too.

Sorry for spamming the thread; however I want to post results:
BFG 6600 GT doesn't work with either Titan nor Nanit, back to macvidia.

[aberracus]

For the ones who wan tto UPGRADE their systems to 10.4.8 with new kernel

look here is easy and quick

http://forum.insanel...showtopic=32025

[ptesone]

aberracus, you should clairify: for INTEL only. . .

[hack-a-mac]

Kal, on Nov 6 2006, 05:10 PM, said:

EDIT: Same results. I'm also using the DVI port via a VGA adapter (I tried the monitor in both the VGA and DVI ports). I believe that someone else had the same issues with a CRT.
Odd.

I can confirm that Natit can work with a CRT plugged into a VGA->DVI adaptor.

[robb]

I' ve installed the Natic kext, but doesn' t work!!

i wan't to know if i must change other after the installation?



NVIDIA GeForce 6600:

  Modello Chipset: NVIDIA GeForce 6600
  Tipo: Monitor
  Bus: PCIe
  VRAM (totale): 256 MB
  Fornitore: NVIDIA (0x10de)
  ID dispositivo: 0x0141
  ID revisione: 0x00a2
  Monitor:
SyncMaster:
  Risoluzione: 1280 x 1024 @ 60 Hz
  Profondità: Colore 32-bit
  Core Image: Non Supportato
  Monitor principale: Sì
  Mirror: Spento
  Online: Sì
  Quartz Extreme: Non Supportato

[dm_webd]

robb, on Nov 9 2006, 01:00 AM, said:

I' ve installed the Natic kext, but doesn' t work!!

i wan't to know if i must change other after the installation?
NVIDIA GeForce 6600:

Are you using the new kernel from 10.4.8?

[magic0200]

Hope someone can confirm this question about this driver and my monitor:

Using the installer, I have a 7300GS and let me just say everything works perfect in the OS.

I was unsure if this was my end or the driver, but when I boot up I get to the Grey apple screen and then the screen goes black for about 20 seconds, then if I reinitialize my screen after that it shows the loading screen and my screen works fine.

Could this be my monitor or does everyone have this in their boot up?

Using newest OSX with Mifki and installer on news page.

[Fernando Birra]

magic0200, on Nov 11 2006, 03:40 PM, said:

I was unsure if this was my end or the driver, but when I boot up I get to the Grey apple screen and then the screen goes black for about 20 seconds, then if I reinitialize my screen after that it shows the loading screen and my screen works fine.

What do you mean with this? turn it off and back on? I also have problems with my setup loosing the signal during boot, when it switches from the gray apple logo to the starting screen. I have my monitor connected to the DVI port (which seems to be port , without any adapter. With Titan I need to have the VGA port connected since most of the times I don't get the image back on the DVI output. But it works 100% of the times on VGA port. With the Natit latest version, with the modifications to have dual monitor setup I can get the DVI output most of the times. I would say about 80%. However, now I need to have the VGA port totally disconnected or I will get an empty blue screen on DVI and nothing on VGA...

My card is a 7600GS with 256 Mb

Fernando Birra

[bofors]

magic0200, on Nov 11 2006, 10:40 AM, said:

I was unsure if this was my end or the driver, but when I boot up I get to the Grey apple screen and then the screen goes black for about 20 seconds, then if I reinitialize my screen after that it shows the loading screen and my screen works fine.

Could this be my monitor or does everyone have this in their boot up?

Everybody has this sort of thing happening on boot and setting the EDID values does not seem to fix either, perhaps setting someother keys would.

Fernando Birra, on Nov 11 2006, 12:02 PM, said:

However, now I need to have the VGA port totally disconnected or I will get an empty blue screen on DVI and nothing on VGA...

My card is a 7600GS with 256 Mb

This seems kind of odd.  What brand of card do you have?  Which kernel are you using?  Can you give us the specs. of your system?

This version of Natit might work better for you: http://forum.insanel...t...ost&id=5778

[Fernando Birra]

bofors, on Nov 11 2006, 05:43 PM, said:

Everybody has this sort of thing happening on boot and setting the EDID values does not seem to fix either, perhaps setting someother keys would.
This seems kind of odd.  What brand of card do you have?  Which kernel are you using?  Can you give us the specs. of your system?

This version of Natit might work better for you: http://forum.insanel...t...ost&id=5778

My card is a Manli 7600GS with 256MB, DVI+VGA+TV out (supposedly hidef capable).
My system is MSI 915G based with onboard VGA disabled, CPU is P4 630 and I am running 10.4.8 with mifki's (nonx) kernel.


Are you sure about the link above?

Fernando

[bofors]

Fernando Birra, on Nov 11 2006, 01:14 PM, said:

My card is a Manli 7600GS with 256MB, DVI+VGA+TV out (supposedly hidef capable).
My system is MSI 915G based with onboard VGA disabled. CPU is P4 630.

You are running 10.4.8, right?  Which kernel, Semthex's?

Quote

Are you sure about the link above?

Yes, that is the 0.01 version of the dual display Natit.kext.  It does not use the "@0,NVMT" key and works on VGA/DVI cards fine: http://forum.insanel...o...=32536&st=0

[Fernando Birra]

bofors, on Nov 11 2006, 06:22 PM, said:

You are running 10.4.8, right?  Which kernel, Semthex's?
Yes, that is the 0.01 version of the dual display Natit.kext.  It does not use the "@0,NVMT" key and works on VGA/DVI cards fine: http://forum.insanel...o...=32536&st=0

Ok, I got the file but I have already played with the both NVCAP and NVMT entries. Tried the 4 combinations but nothing. I will try again later since I am not near my desktop but using the laptop instead.

My desktop is running Darwin 8.8.1 mifki/Vitaliy kernel (the one with nx disabled). It runs perfect so far, including sleep function.

By the way, does anyone know if there has ever existed an Apple notebook with an nVidia card? It would be nice to have the ioreg output of such a system since I can't make the internal display of my Toshiba notebook to work using Natit/Titan. The output always goes to the VGA connector on my GeForce FX Go5200. However, in this case I am still stuck with 8.4.1 kernel since it is a SS2 machine.

Fernando

[magic0200]

Thanks for all the replies

I'm running 10.4.8 tried both SEM and MIF on a 945G board (Dell E510) and Nvidia (PNY) 7300GT with DVI (looks amazing).

My computer boots
Dell Screen loading
Apple Grey Screen with circle load
Screen Goes Black where no signal is found
I wait approx 20 seconds (any less than that and still no sync is found)
Turn monitor off and on again and I come to the OSX loading bar (extremely quick load)

GUI and OS run perfect after that.
(screen saver, sleep mode....etc)

Hope this can clarify. I am also using the Natit from the news release so I am unaware of any new versions of it if there is one since that post.

[bofors]

Fernando Birra, on Nov 11 2006, 01:33 PM, said:

Ok, I got the file but I have already played with the both NVCAP and NVMT entries. Tried the 4 combinations but nothing.

Well then don't bother with v0.01.