lauraxxx Posted March 12, 2007 Share Posted March 12, 2007 ciao ragazzi installando i driver ati9950 c-006, gli effetti grafici vanno a scatti come anche i filmati. aiutatemi Link to comment Share on other sites More sharing options...
manuel teixeira Posted March 13, 2007 Share Posted March 13, 2007 I have installed ATI_x300_C008.zip on my ati radeon x300, when starting i get the black screen of death :S, when i start in safe mode i can even put it at 1280*1024 75hz that it works fine. Reboot, blac screen! Any sugestion? tks Link to comment Share on other sites More sharing options...
lauraxxx Posted March 18, 2007 Share Posted March 18, 2007 ciao a tutti non capisco il file ATINDRV DICE CHE è INSTALLATO MALE di provare a installarlo nuovamente Link to comment Share on other sites More sharing options...
ObiSeb Posted March 20, 2007 Share Posted March 20, 2007 Hi there. I just tried ATI_x300_C008.zip on my Radeo x300 PCIE with JAS 10.4.6 and it worked well. I just have the mouse artifacts... Thanks very much ! Link to comment Share on other sites More sharing options...
JohnPopes Posted March 26, 2007 Share Posted March 26, 2007 and ati x700, can anyone help me with that? Link to comment Share on other sites More sharing options...
kanym Posted March 30, 2007 Share Posted March 30, 2007 ehm..ho una 9550pro, ho un monitor a tubo catodico(17", abbastanza vecchiotto) ho provato ad installare tutti e 3 i driver per la 9550 ma non va nessuno..dice "Riprova l'installazione" help ç_ç Link to comment Share on other sites More sharing options...
kanym Posted March 31, 2007 Share Posted March 31, 2007 up!! Link to comment Share on other sites More sharing options...
BlueWater Posted April 1, 2007 Share Posted April 1, 2007 Chipset Model: ATI MOBILITY FIRE GL T2 Type: Display Bus: AGP VRAM (Total): 128 MB Vendor: ATI (0x0080) Device ID: 0x4E54 I do not know how to do the following。 Link to comment Share on other sites More sharing options...
joskus Posted April 4, 2007 Share Posted April 4, 2007 Babelfish Italiano: Chiunque ha convinto una scheda del PCI del Se X300 per funzionare? Usando Callisto 008 non ha funzionato, né ha niente altro che abbia visto. Dalla comunicazione & dal PM altri membri del bordo che assomiglia a tutto è nella stessa situazione. Per memoria, i miei identificazione 5b60) impianti X300 (con i 10.4.8 standard JaS non installano (con QE/CI) ma ha strapparsi del mouse e risoluzione 1680x1050. Chiunque ha esperienze differenti? ENGLISH: Has anyone gotten a X300 SE PCI card to work? Using Callisto 008 didn't work, nor has anything else I've seen. From talking & PM other members of the board it looks like everyone is in the same situation. For the record, my X300 (5b60 ID) works with the standard 10.4.8 JaS install (with QE/CI) but has mouse tearing and no 1680x1050 resolution. Anyone have different experiences? Link to comment Share on other sites More sharing options...
Loc Dog Posted April 24, 2007 Share Posted April 24, 2007 Apr 24 13:19:56 os-x-larkin : @(#)PROGRAM:Install PROJECT:Install-141 DEVELOPER:root BUILT:Aug 12 2006 00:24:28\n Apr 24 13:19:56 os-x-larkin : @(#)PROGRAM:Installer PROJECT:Installer-94 DEVELOPER:root BUILT:Jul 2 2006 00:22:31\n Apr 24 13:19:56 os-x-larkin : Hardware: ADP2,1 @ 3000 MHz (x2), 1024 MB Apr 24 13:19:56 os-x-larkin : Running OS Build: 8L2127 Apr 24 13:19:56 os-x-larkin : ATI Radeon x300 PCI-Express Installation Log Apr 24 13:19:56 os-x-larkin : Opened from: /Users/Home/Desktop/ATI_x300_C008.pkg Apr 24 13:19:57 os-x-larkin : It took 1.816797 seconds to finish launching. Apr 24 13:19:59 os-x-larkin : Distribution: ATI Radeon x300 PCI-Express Apr 24 13:19:59 os-x-larkin : Installation checks completed successfully. Apr 24 13:20:11 os-x-larkin : admin auth received to install Apr 24 13:20:15 os-x-larkin : ================================================================================ Apr 24 13:20:15 os-x-larkin : User picked Easy Install Apr 24 13:20:15 os-x-larkin : Choices selected for installation: Apr 24 13:20:15 os-x-larkin : Install: "ATI Radeon x300 PCI-Express" Apr 24 13:20:15 os-x-larkin : ATI_x300_C008.pkg : ati.radeon.x300 : 0.2.0.0.2 Apr 24 13:20:15 os-x-larkin : ================================================================================ Apr 24 13:20:15 os-x-larkin : It took 0.005898 seconds to summarize the package selections. Apr 24 13:20:15 os-x-larkin : Starting installation: Apr 24 13:20:15 os-x-larkin : Resetting Rosetta cache Apr 24 13:20:16 os-x-larkin : Preparing volume "Macintosh HD" for installation Apr 24 13:20:16 os-x-larkin : Configuring volume "Macintosh HD" Apr 24 13:20:17 os-x-larkin : Preparing local booted disk Apr 24 13:20:17 os-x-larkin : Create temporary directory "/private/tmp/ATI_x300_C008.pkg.6120P4bSg" Apr 24 13:20:17 os-x-larkin : Processing ATI Radeon x300 PCI-Express: Apr 24 13:20:17 os-x-larkin : Initialize patching Apr 24 13:20:17 os-x-larkin : Determining files to install Apr 24 13:20:17 os-x-larkin : Evaluating versions of bundles Apr 24 13:20:17 os-x-larkin : Evaluating custom file version checking Apr 24 13:20:17 os-x-larkin : Configuring deferred files Apr 24 13:20:17 os-x-larkin : Assembling temporary receipt Apr 24 13:20:18 os-x-larkin : Performing pre-extraction actions Apr 24 13:20:18 os-x-larkin : ==== It took 0.036838 seconds to check for prebinding Apr 24 13:20:18 os-x-larkin : Creating destination path Apr 24 13:20:18 os-x-larkin : Extracting files Apr 24 13:20:18 os-x-larkin : 29 files looked up in 0.00 seconds. 29 files written in 0.15 seconds. Apr 24 13:20:18 os-x-larkin : 0 kilobytes installed. Apr 24 13:20:18 os-x-larkin : run postinstall script for ATI Radeon x300 PCI-Express Apr 24 13:20:18 os-x-larkin : Install failed: The following install step failed: run postinstall script for ATI Radeon x300 PCI-Express Apr 24 13:20:19 os-x-larkin : Private/Total = (5.2MB, 64.2MB), Heap/Total = (3.0MB, 18.5MB), Regions(malloc, private) = (29, 40) Apr 24 13:20:19 os-x-larkin : It took 2.664097 seconds to unsuccessfully install "ATI Radeon x300 PCI-Express" (1 pkg(s)) Apr 24 13:20:19 os-x-larkin : It took 0.843728 seconds to <IFStopTranslateCache: 0xf30a530> Apr 24 13:20:19 os-x-larkin : It took 1.046872 seconds to Configuring volume "Macintosh HD" (dm prepare*disk) Apr 24 13:20:19 os-x-larkin : It took 0.766946 seconds to Install ATI Radeon x300 PCI-Express: 22 elements Apr 24 13:20:19 os-x-larkin : It took 0.762375 seconds to unsuccessfully Install package ATI Radeon x300 PCI-Express Apr 24 13:20:19 os-x-larkin : It took 0.052142 seconds to Build install plan (& redirected paths) Apr 24 13:20:19 os-x-larkin : It took 0.330710 seconds to Assembling temporary receipt Apr 24 13:20:19 os-x-larkin : It took 0.065190 seconds to Collect path info (ATS, Sec Equiv, Kext, Pref Panes) Apr 24 13:20:19 os-x-larkin : It took 0.274839 seconds to Write files Apr 24 13:20:19 os-x-larkin : It took 0.038370 seconds to run postinstall script for ATI Radeon x300 PCI-Express Apr 24 13:20:19 os-x-larkin : Apr 24 13:20:19 os-x-larkin : Summary Information Apr 24 13:20:19 os-x-larkin : Type Elapsed time (sec) Apr 24 13:20:19 os-x-larkin : patch 0.000070 Apr 24 13:20:19 os-x-larkin : zero 0.006829 Apr 24 13:20:19 os-x-larkin : script 0.038370 Apr 24 13:20:19 os-x-larkin : extract 0.274839 Apr 24 13:20:19 os-x-larkin : config 0.118069 Apr 24 13:20:19 os-x-larkin : receipt 0.330710 Apr 24 13:20:19 os-x-larkin : disk 1.890639 Apr 24 13:20:19 os-x-larkin : install 0.766946 Apr 24 13:20:19 os-x-larkin : Link to comment Share on other sites More sharing options...
lijie Posted April 27, 2007 Share Posted April 27, 2007 谢谢 朋友.很需要你的9550驱动.不知道我能不能安装成功. Link to comment Share on other sites More sharing options...
kanym Posted May 23, 2007 Share Posted May 23, 2007 ho installato i driver callisto 008, riavvio il pc e....... non parte più osx.. in pratica accendo il pc, loading del mac, per una frazione di secondo esce lo sfondo col login e puff..tutto neeerooo!! aiutatemi ç_ç p.s. qualcuno sa come cancellare i driver senza accedere al sistema operativo? Link to comment Share on other sites More sharing options...
squalo Posted May 27, 2007 Share Posted May 27, 2007 Ciao a tutti.. volevo chiedervi una cosa, io ho una ati 9600 : -------------------------------------- Tipo: Monitor Bus: PCI VRAM (totale): 256 MB Fornitore: ATI (0x1002) ID dispositivo: 0x4150 ID revisione: 0x0000 --------------------------------------- il mio id non è quello giusto per installare i driver della 9600 o posso comunque installarlo e poi fare qualche piccola modifica ad un file? Link to comment Share on other sites More sharing options...
greg3105 Posted May 28, 2007 Share Posted May 28, 2007 Hi, Does it Work with a x300 just PCI Device ID 5460 ??? Thx for your response? Link to comment Share on other sites More sharing options...
Psygon Posted May 30, 2007 Author Share Posted May 30, 2007 Greg3105, u can modify ATIRadeon9700.kext and CallistoHAL.kext adding your DevID Squalo, stessa cosa. Ho specificato nella guida a prima pagina quali sono gli ID ke ho fatto supportare. Basta Cambi/Aggiungi il tuo ID sui files ke ho scritto sopra. Link to comment Share on other sites More sharing options...
dscao Posted June 6, 2007 Share Posted June 6, 2007 Is there exist the ATI Radeon 9200 installer Is there existing the ATI Radeon 9200 installer Link to comment Share on other sites More sharing options...
mitch41 Posted June 10, 2007 Share Posted June 10, 2007 Call me silly... But can someone translate this to english? and do the patches work for English? Sorry, pardon my noobishness. >_< Mitch Link to comment Share on other sites More sharing options...
Dizu Posted June 21, 2007 Share Posted June 21, 2007 Babelfish Italiano: Chiunque ha convinto una scheda del PCI del Se X300 per funzionare? Usando Callisto 008 non ha funzionato, né ha niente altro che abbia visto. Dalla comunicazione & dal PM altri membri del bordo che assomiglia a tutto è nella stessa situazione. Per memoria, i miei identificazione 5b60) impianti X300 (con i 10.4.8 standard JaS non installano (con QE/CI) ma ha strapparsi del mouse e risoluzione 1680x1050. Chiunque ha esperienze differenti? ENGLISH: Has anyone gotten a X300 SE PCI card to work? Using Callisto 008 didn't work, nor has anything else I've seen. From talking & PM other members of the board it looks like everyone is in the same situation. For the record, my X300 (5b60 ID) works with the standard 10.4.8 JaS install (with QE/CI) but has mouse tearing and no 1680x1050 resolution. Anyone have different experiences? Yes! I got it working. With Callisto 008... but no QE/CI... can you share your experience in getting QE/CI on X300SE ? I'm really desperate! Link to comment Share on other sites More sharing options...
BTVideo Posted June 22, 2007 Share Posted June 22, 2007 any driver that works for ATI Radeon X550? Link to comment Share on other sites More sharing options...
Dr. Fresh Posted June 24, 2007 Share Posted June 24, 2007 any driver that works for ATI Radeon X550? You have to first download and install the Koverg patch: http://www.yourfilelink.com/get.php?fid=91429 Then you have to download and install the callisto drivers (click on Build 008): http://omni.110mb.com/callisto/ Then Look in your /System/Library/Extensions folder for ATIRadeon9700GA.plugin. Copy to your desktop, Edit its Info.plist. Under the IOProviderClass key change IONDRVFramebuffer to CallistoFB. Move your original (in extensions folder) to the trash, replace with modified kext. Update or delete Extensions.mkext and Extensions.kextcache, repair permissions, then reboot. This worked for me! full QE & CI (with mouse tearing) & resolution switching. Its also reading the DDC information from my monitor. This will not work for 10.4.8 or above (different Ati kexts) Radeon X550 (PCIE): Chipset Model: Radeon X550 (PCIE) Type: Display Bus: PCI VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x5b63 Revision ID: 0x0000 Displays: Acer AL1916W: Resolution: 1440 x 900 @ 60 Hz Depth: 32-bit Color Core Image: Supported Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Link to comment Share on other sites More sharing options...
failurbydesign Posted June 28, 2007 Share Posted June 28, 2007 how about an installer for a x700 pro id 5E4B Link to comment Share on other sites More sharing options...
failurbydesign Posted July 18, 2007 Share Posted July 18, 2007 BUMP Link to comment Share on other sites More sharing options...
Inday Posted August 6, 2007 Share Posted August 6, 2007 I have installed ATI_x300_C008.zip on my ati radeon x300, when starting i get the black screen of death :S, when i start in safe mode i can even put it at 1280*1024 75hz that it works fine. Reboot, blac screen! Any sugestion? tks I have the same problem, have you already a clou. What is the different between safe mode flags -V -x with normal desktop and a normal start. Only the sound driver is not loaded, everthing else is the same. Link to comment Share on other sites More sharing options...
antonhy10 Posted August 6, 2007 Share Posted August 6, 2007 non si trova niente per nvidia serie 6600? mi servono i driver Link to comment Share on other sites More sharing options...
stationapollo Posted August 8, 2007 Share Posted August 8, 2007 Anthony sei in un forum per le ATI.....comunque se usi la 10.4.8 o precedenti usa i Titan mentre se usi versioni successive(10.4.9-10.4.10) usa il paccone di Diabolik che fa tutto solo. Cerca su google queste 2 paroline e avrai ciò che cerchi Link to comment Share on other sites More sharing options...
Recommended Posts