Zaek Posted February 7, 2015 Share Posted February 7, 2015 I was successful in emulating mavericks on VMware but would like to make use of the systems full hardware capabilities. Goal would be to run Xcode, Swift and related apps w/o issues with decent performance on Mavericks or Yosemite. I have the i3 4030u which should not be an issue, but do worry about a dell motherboard. (or whatever it is) Here is my CPU-Z info: http://valid.x86.fr/j1a9nz (Dell Inspiron 13 7000 2-in-1, Model# 7347) Mothrboard: Model Dell Type2 - Board Product Name1 BIOS Dell Inc. - A03 - 10/15/2014 CPU Socket Socket 1168 BGA North Bridge Intel Haswell-ULT rev 0B South Bridge Intel ID9C43 rev 04 Link to comment Share on other sites More sharing options...
golden419 Posted February 7, 2015 Share Posted February 7, 2015 You will never know untill you try. But am sure that you will not have wifi unless you swap your wifi card or use a usb wifi adaptor. Audio you can get with patched applehda or voodoohda. Card reader is almost impossible on dell. Just try and see the result and start working out the problem with kexts and dsdt patches. Link to comment Share on other sites More sharing options...
tonino1977 Posted February 9, 2015 Share Posted February 9, 2015 Hello I too have the same laptop, but with i5 version, for THE INSTALLATION I used the method "Yosemite with clover efi" are driving with google, while for the kekt startup just put those necessary, I itilizzato driving "Yosemite of hp ". As for the graphics just edit the SSDT, .... It Works: Graphics, brightness (using SSDT) Usb seems ok processor ok battery ok sleep test .... sd ok webcam ok It does not work: wifi audio after sleep usb keys to change brightness Excuse my English but I have translated with google .... I'm Italian! Link to comment Share on other sites More sharing options...
amdminer Posted February 12, 2015 Share Posted February 12, 2015 I think that I'm first person who tryed to set up yosemite on this laptop So: Graphics OK Brightness control OK Brightness control after sleep OK Battery OK USB OK USB after sleep OK Webcam OK Audio with Vodoo HDA OK but some kind of reverb, sound works after sleep. Autoswitch to headphones work. Audio with AppleHDA OK but some kind of reverb, sound doesn't works after sleep. Autoswitch to headphones work. fn+F11, fn+F12 to change brightness OK Issues: 1)Doesn't wake up from sleep sometimes 2)Yosemite doesn't start in 50% of tryes. I get apple on black screen and nothing else. When I press power button it disables instantly like I was in the BIOS. When I use -v flag then I get message UUID is.... and nothing else after that. System log doesn't give me any information on that accidents. How are you guys with this problem? Link to comment Share on other sites More sharing options...
tonino1977 Posted February 12, 2015 Share Posted February 12, 2015 Hello finally a user with the same laptop .... Then for the start I do not have this problem, it had at the beginning but after having placed the SSDT-7, dsdt and applied the patch of clover in the config now always goes. summary: graphic ok (id 0x0a260006 + patch) usb ok (to face after waking hangs) webcam ok luminosity ok Brightness fn key no !!! wifi usb d-link (but I ordered the Bradcom that will come soon) Audio ok with AppleHDA also popo awakening .... with antitop Battery ok .... If you want I send you my dsdt-SSDT and the config of clover! While you how you solved the keyboard to control the brightness by FN F11-F12? Link to comment Share on other sites More sharing options...
amdminer Posted February 14, 2015 Share Posted February 14, 2015 I decided fn key brightness problem using SSDT-7 patch. So here's my EFI partition uploaded: https://www.sendspace.com/file/1jys1s Please post your EFI partition files too to let me see why you don't have this problem at system start. Link to comment Share on other sites More sharing options...
tonino1977 Posted February 17, 2015 Share Posted February 17, 2015 Hello, thanks for efi anyway or terminated for FN I modified DSDT and now works, as regards the black screen at startup, I'll explain: 1) using the SSDT-7 and inserting graphics as id --- 0x0a260006 = 0x06, 0x00, 0x26, 0x0a + patch in clover: <dict> <key> Name </ key> <string> AppleIntelFramebufferAzul </ string> <key> Comment </ key> <string> 0x0a260006 9MB cursor bytes patch </ string> <key> Find </ key> <string> 0600260a01030303000000020000300100006000 </ string> <key> Replace </ key> <string> 0600260a01030303000000020000300100009000 </ string> </ dict> Start after sleep ok sometimes black screen at startup. 2) using the SSDT-7 and inserting graphics --- 0x0a26000a as id = 0x0a, 0x00, 0x26, 0x0a no patch Start after no sleep (at the time) black screen no boot Now I'm trying to solve for audio using AppleHDA, Audio from pc ok, by no headphones, no hdmi .... As I get home I'll send you the link of my efi ... Link to comment Share on other sites More sharing options...
tonino1977 Posted February 17, 2015 Share Posted February 17, 2015 Link EFI https://www.dropbox.com/s/ujz60csxl6029o8/EFI.zip?dl=0 Link to comment Share on other sites More sharing options...
amdminer Posted February 18, 2015 Share Posted February 18, 2015 What is the Yosemite version do you use now? 10.10.1. or 10.10.2? I used only 1 clover patch in ig-platform-id section of clover configurator when I was on 10.10.1. But now I'm forced to use FakePCIID_HD4600_HD4400.kext + FakePCIID.kext + SSDT Fix solution because I'm using 10.10.2 now. Link to comment Share on other sites More sharing options...
tonino1977 Posted February 21, 2015 Share Posted February 21, 2015 Hello sorry if I answer now, but I was out of the area! How utlizzo the version 10.10.2 For graphics currently the best solution I use is to change the SSDT-7 using as ig-platform 0x0a26000a, for the FULL QE / CI I used this guide: http://www.insanelymac.com/forum/topic/304267-intel-hd4400-full-qeci-in-yosemite-10102/ I also replaced the wifi card with this: http://www.ebay.it/itm/191504733413?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 Perfect, just ulizzare the kext + update BT (or used vietnam tools) and recognized perfectly! I remain to settle the problem of the awakening of the monitor (monitor off) while the sleep complete works perfectly; Audio to HDMI You've solved with audio? Link to comment Share on other sites More sharing options...
amdminer Posted February 25, 2015 Share Posted February 25, 2015 No I didn't resolve audio through HDMI problem. Can you send your current EFI files which you use with 10.10.2? Thanks. Link to comment Share on other sites More sharing options...
avin7000 Posted May 8, 2015 Share Posted May 8, 2015 Guys has there been any progress made on this one? Link to comment Share on other sites More sharing options...
Thomas Morus Posted May 18, 2015 Share Posted May 18, 2015 I am running Mac OS X 10.10.3 (Yosemite) on my Dell Inspiron 2 in 1, installed on a 64 GB SD Card, using Clover. I have just followed the instructions posted here. Most of times everything runs ok! I´ve bought Linksys 6000 Wifi dongle. Sound works good from the speakers with VoodooHDA. Video running with full acceleration and I am able to share my screen through HDMI or Airplay. No mic. Touchscreen ok, keyboard and touchpad ok with PS/2 kexts. Now I have two alternatives, because I did not touch the original hard drive, I can run Yosemite on VMware and native on my machine. Facetime, iMessages and App Store functioning. Link to comment Share on other sites More sharing options...
b1t0y Posted May 18, 2015 Share Posted May 18, 2015 Hi I am running Mac OS X 10.10.3 (Yosemite) on my Dell Inspiron 2 in 1, installed on a 64 GB SD Card, using Clover. I have just followed the instructions posted here. Most of times everything runs ok! I´ve bought Linksys 6000 Wifi dongle. Sound works good from the speakers with VoodooHDA. Video running with full acceleration and I am able to share my screen through HDMI or Airplay. No mic. Touchscreen ok, keyboard and touchpad ok with PS/2 kexts. Now I have two alternatives, because I did not touch the original hard drive, I can run Yosemite on VMware and native on my machine. Facetime, iMessages and App Store functioning. Does the your sleep works after sleep? What dsdt patch did you use for usb 3.0 to wake up from sleep? I used genericusbxchi.kext with -gux_defer_usb2 for kernel flag. It sleeps when computer is on battery but instantly wake when AC is plugged. I am using chameleon and not clover. Can you sent your DSDT and SSDT? Thanks. Link to comment Share on other sites More sharing options...
Thomas Morus Posted May 23, 2015 Share Posted May 23, 2015 I even gave my MacBook air to my sun, running everything exclusively from my 2 in 1! Sometimes it wakes up ok, others not... At random... When I get a black screen I can get it back just pressing the power button... I can upload my EFI partition, but I don´t think I did anything different! Link to comment Share on other sites More sharing options...
jnrfst Posted June 12, 2015 Share Posted June 12, 2015 I have a Dell inspiron 13-7348 2-in-1 laptop , and i always get the black screen, if i don't use -v, stay stuck on apple logo. I already try: -v,-x, GraphicsEnabler=No, PCIRootUID, UseKernelCache=NOetc. Some one can help me? Link to comment Share on other sites More sharing options...
maleorderbride Posted June 23, 2015 Share Posted June 23, 2015 jnrfst: What graphics do you have? HD4400, or HD5500? Figure out the CPU, then the graphics, then google a guide to enable it. Does anyone have the battery icon working via SSDT (or DSDT)? I have the newer model with the HD5500, but figure all that should still be the same. (I haven't really googled, sorry! ;p) Also, often when I reboot I seem to get a CMOS reset (goes to HDD detect, generic hardware troubleshooting, loud beep). I patched RTC in DSDT, what else might prevent that? If anyone is still trying to get HDMI audio to work, it looks like a FakePCIID to change the HDMI ID to one that is supported would work. Saw it on he who shall not be named's site from Nguyenmac, but he also posts over here. Have not tried it yet as HDMI is rather far down on my list. Link to comment Share on other sites More sharing options...
jnrfst Posted August 12, 2015 Share Posted August 12, 2015 maleorderbride, It as a Intel Core i7- 5500, with a HD Graphics 5500. I try to search how to do that, but no success. How did you do? Link to comment Share on other sites More sharing options...
Guest Posted February 10, 2016 Share Posted February 10, 2016 I have inspiron 7347 I5 everything works fine, but audio truoth HDMI doesn't work.anybody fix this problem? I have a Dell inspiron 13-7348 2-in-1 laptop , and i always get the black screen, if i don't use -v, stay stuck on apple logo. I already try: -v,-x, GraphicsEnabler=No, PCIRootUID, UseKernelCache=NOetc. Some one can help me? u need OsxAptioFixDrv-64.efi driver. Link to comment Share on other sites More sharing options...
dalvik21 Posted February 20, 2016 Share Posted February 20, 2016 I have inspiron 7347 I5 everything works fine, but audio truth HDMI doesn't work. anybody fix this problem? u need OsxAptioFixDrv-64.efi driver. Plz, could you post your efi folder here:) Link to comment Share on other sites More sharing options...
Guest Posted February 23, 2016 Share Posted February 23, 2016 can i upload my EFI directly to this forum without use other website? Link to comment Share on other sites More sharing options...
dalvik21 Posted February 25, 2016 Share Posted February 25, 2016 can i upload my EFI directly to this forum without use other website? I don't know :\ Link to comment Share on other sites More sharing options...
dalvik21 Posted February 27, 2016 Share Posted February 27, 2016 can i upload my EFI directly to this forum without use other website? Please, send me your EFI foulder, I would be very grateful to u. My Email: m.shevelinski@yandex.by Thanks:) Link to comment Share on other sites More sharing options...
Guest Posted February 27, 2016 Share Posted February 27, 2016 (edited) On 2/27/2016 at 7:22 PM, dalvik21 said: Please, send me your EFI foulder, I would be very grateful to u. My Email: m.shevelinski@yandex.by Thanks:) <iframe src="https://onedrive.live.com/embed?cid=A2978527110BA50E&resid=A2978527110BA50E%2130610&authkey=ANkF2af_bgznbnw"width="165" height="128" frameborder="0" scrolling="no"></iframe> there u have patch complete kext for audio Applehda alc 255 with codecommandor, intel 7625 wireless (not complete) and many more... one thing*, create your new SMBIOS on config.plist (Macbook Air 6,2) with random Serial Number enjoy Edited November 16, 2020 by Guest Link to comment Share on other sites More sharing options...
dalvik21 Posted February 27, 2016 Share Posted February 27, 2016 <iframe src="https://onedrive.live.com/embed?cid=A2978527110BA50E&resid=A2978527110BA50E%2130610&authkey=ANkF2af_bgznbnw"width="165" height="128" frameborder="0" scrolling="no"></iframe> please... my efi folder, there u have patch complete kext for audio Applehda alc 255 with codecommandor, intel 7625 wireless (not complete) and many more... one thing*, create your new SMBIOS on config.plist (Macbook Air 6,2) with random Serial Number enjoy Lots of thanks:) Link to comment Share on other sites More sharing options...
Recommended Posts