I write this topic regard install OS X Yosemite on hack using clover boot loader
I have 3 system update and run great from Yosemite:
*one is Gigabyte X583-UD3R, core i7-930, Gigabyte gtx660Ti
*one is haswell cpu i3, pair with msi-h97 PC Mate, Gigabyte gtx650
*one with Ivy-bride cpu i3 pair to Asrock H77M, Gigabyte AMD Radeon 7870
so let begin how to install to those.
first you need to get Yosemite installer to the application folder. you could use usb or hard drive (one work for you, I used hard drive cause it is faster and I have few spare 40 GB around.) former the usb that with the name 1 with GUID Partition table. then copy and paste on to terminal:
sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/1 --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --no interaction
when done, then get the clover boot loader from my is v.2953 to the target of
then after that go to
Install OS X Yosemite ▸ EFI ▸ CLOVER ▸ kexts
and create a 10.10 folder, copy you current system fakeSMC, network kext, (you may need the NullCPUPowermanagement.kext, my on the i7-930 is require, while the haswell and Ivy-bridge doesn’t have to) also delete the VboxHFS+.efi and replace with the HFSPlus.efi
about the config.plist I advice you to used the latest clover configurator to edit http://www.hackintos...r-configurator/
note with the Nvidia Kepler, you don’t have to mark anything with the graphics at all.
that is the installer ready, go and install
when it load clover on the installer hit the spacebar, chose the boot with verbose to check what is missing and then boot it up and system.
fine tune is to make it boot by itself without the help of installer, when inside the Yosemite, you could use the Carbon copy cloner and clone the same thing on a partition or or differ disk(save your time later if you need to reinstall Yosemite) install clover boot loader to the boot drive you have that, copy the config.plist and 10.10 kext folder from the installer and it could boot it self.
with the AMD Radeon 7870, I need to used the device property to kale it boot right to how 2 monitor by the guide from http://olarila.com/f....php?f=16&t=154 copy and past to the terminal
ioreg -lw0 -p IODeviceTree -n efi -r -x | grep device-properties | sed 's/.*<//;s/>.*//;' > device-properties.hex
and open the home folder you have it, you would need EFI Studio to open that HEX file and insert it to the Divices/properties/inject for the Radeon 7870
and now this is what I am have
with audio, I used voodooHDA 2.8.4, give me audio on Nvidia kepler HDMI to Television, the Radeon 7870 I could not het the sound over HDMI,
I have some file include, if it could help anyone , you welcome to used.
this is the file or the link here https://github.com/J...X64/HFSPlus.efi
edit: add EFI for MSI H97PC mate with DSDT for HDMI audio over Radeon7950
edit1: add EFI clover for X58A-UD3R GTX660Ti HDMI Audio with edit DSDT