dgsga Posted July 26, 2012 Share Posted July 26, 2012 This quick dsdt edit seems to work. You can inject this via efi device properties too. Insert the device code wherever you have USB3 in your DSDT (find this using ioreg), naming each device XHC1, XHC2 etc... Device (XHC1) { Name (_ADR, Zero) Alias (PW94, _PRW) Method (_DSM, 4, NotSerialized) { Store (Package (0x0A) { "device-id", Buffer (0x04) { 0x31, 0x1e, 0x00, 0x00 }, "vendor-id", Buffer (0x04) { 0x86, 0x80, 0x00, 0x00 }, "name", Buffer (0x0D) { "pci8086,1e31" }, "subsystem-id", Buffer (0x04) { 0x70, 0x72, 0x00, 0x00 }, "subsystem-vendor-id", Buffer (0x04) { 0x86, 0x80, 0x00, 0x00 } }, Local0) DTGP (Arg2, RefOf (Local0)) Return (Local0) } } usb3.tiffusb32.tiff 3 Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/ Share on other sites More sharing options...
bajabronco Posted July 27, 2012 Share Posted July 27, 2012 I tried like hell to find the USB 3 string in my DSDT - pulled the address/device # from the ioreg explorer, and still couldn't find it. I have a ASRock motherboard, what did your string look like before you modified it? Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1837471 Share on other sites More sharing options...
dgsga Posted July 27, 2012 Author Share Posted July 27, 2012 Look for the device and vendor id of your USB chipset in your ioregistry. It will appear under one of the devices e.g. RP06. make sure USB3 is enabled in bios. Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1837564 Share on other sites More sharing options...
TimeWalker75a Posted July 27, 2012 Share Posted July 27, 2012 Neat! Will give this a go for my fresco logic 1009 when I get home. Any idea if this works for other controllers as well? I have tried to mimic the id of mba5,2 previously but nothing changed really. Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1837571 Share on other sites More sharing options...
proteinshake Posted July 27, 2012 Share Posted July 27, 2012 I tried the exact same thing with 10.7.5 pre-releases and it failed with Renesas 720200A and 720201 - devices attached were detected and displayed in IOREG but never actually worked.I'll sure try again with ML now. Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1837585 Share on other sites More sharing options...
TimeWalker75a Posted July 27, 2012 Share Posted July 27, 2012 Also are you sure about this part? DTGP (Arg2, RefOf (Local0)) DTGP usually takes 5 arguments, not just 2. UPD: Nope, not working for Fresco Logic 1009, or am I missing something? Even though it is being detected and my WD Passport light up, it is not picked up by the system. Device (RP03) { Name (_ADR, 0x001C0002) ................... Device (XHC1) { Name (_ADR, Zero) Alias (PW94, _PRW) Method (_DSM, 4, NotSerialized) { Store (Package ( ) { "device-id", Buffer (0x04) { 0x31, 0x1e, 0x00, 0x00 }, "vendor-id", Buffer (0x04) { 0x86, 0x80, 0x00, 0x00 }, "name", Buffer (0x0D) { "pci8086,1e31" }, "subsystem-id", Buffer (0x04) { 0x70, 0x72, 0x00, 0x00 }, "subsystem-vendor-id", Buffer (0x04) { 0x86, 0x80, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } Name (PW94, Package (0x02) { 0x09, 0x04 }) } .................... } Screens: http://puu.sh/M8cO http://puu.sh/M8dg Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1837592 Share on other sites More sharing options...
proteinshake Posted July 27, 2012 Share Posted July 27, 2012 The DSDT is fine, but there has to be something else missing. Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1837634 Share on other sites More sharing options...
DoiX Posted July 27, 2012 Share Posted July 27, 2012 I tried this the second i got my hands on the DSDT of a macbook pro 2012. It didn't even acknowledge the DSDT changes. NEC USB3 chipset here... Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1837636 Share on other sites More sharing options...
thanh hoang Posted July 27, 2012 Share Posted July 27, 2012 Show USB 3.0 but not work=> Thanks.... Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1837674 Share on other sites More sharing options...
iLeopod Posted July 29, 2012 Share Posted July 29, 2012 "name", Buffer (0x0D) { "pci8086,1e31" }, should be: "name", "pci8086,1e31", i have no usb3 device to test, but for USB 2 its not working. My MB has two Etron controlllers. Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1838346 Share on other sites More sharing options...
cili0 Posted August 3, 2012 Share Posted August 3, 2012 I suppose this won't work with 3rd party pci-e cards, right? Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1840663 Share on other sites More sharing options...
iLeopod Posted August 3, 2012 Share Posted August 3, 2012 For me its not even working with the internal 3rd party controller. (only test with USB 2) Maybe there are some further properties needed, the apple SSDTs have much more entries for XHCx. Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1840686 Share on other sites More sharing options...
TimeWalker75a Posted August 3, 2012 Share Posted August 3, 2012 yeah, I believe it's not even working. Judging by OP screenshots it won't work for him either, so why share and make a fuss around it ? 1 Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1840687 Share on other sites More sharing options...
DoiX Posted August 3, 2012 Share Posted August 3, 2012 Well, i decided to connect a USB Stick and leave it for a while. This is what happened: It gets detected but it's not mounted, any attempts of doing so results in this message: And in the terminal it says "time out" Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1840704 Share on other sites More sharing options...
TimeWalker75a Posted August 3, 2012 Share Posted August 3, 2012 Actually after applying this patch to my dsdt I lost all of the usb mass storage functionality, only HID and peripheral devices (printer, scaner) devices worked. Mass storage devices would be detected (on regular usb 2.0 ports, not on the 3.0 though) but never got mounted. Forcing them to mount through Disk utility resulted in the same message as DoiX posted above... Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1840707 Share on other sites More sharing options...
DoiX Posted August 3, 2012 Share Posted August 3, 2012 (edited) After some more time, it finally got mounted, on it's own.. but it's currently empty. Console log reported it's getting a new UUID... Update: Aaaaaand the contents are fully visible. Update 2: Read/Write is painstakingly slow, gets stuck for a while on "preparing" Update 3: I connected my iPhone, after a while itunes picked it, it seems behave better than the usb stick, however Image Capture isn't detecting it. Edited August 3, 2012 by DoiX Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1840756 Share on other sites More sharing options...
TimeWalker75a Posted August 3, 2012 Share Posted August 3, 2012 S After some more time, it finally got mounted, on it's own.. but it's currently empty. Console log reported it's getting a new UUID... Update: Aaaaaand the contents are fully visible. Update 2: Read/Write is painstakingly slow, gets stuck for a while on "preparing" Update 3: I connected my iPhone, after a while itunes picked it, it seems behave better than the usb stick, however Image Capture isn't detecting it. So how long did you have to wait for the thing to mount ? Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1840811 Share on other sites More sharing options...
DoiX Posted August 3, 2012 Share Posted August 3, 2012 @TimeWalker, it seems random. Between 5 and 10 minutes, having the stick/device plugged in while booting the system reduces the time to 5 minutes, only constant i've found. Other than that 5 - 10 minutes. I assume the kext needs to be patched, as it seems to enter some cyclic check function, hence the slow mounting/copying. Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1840822 Share on other sites More sharing options...
oolll Posted September 27, 2012 Share Posted September 27, 2012 This quick dsdt edit seems to work. You can inject this via efi device properties too. Insert the device code wherever you have USB3 in your DSDT (find this using ioreg), naming each device XHC1, XHC2 etc... Hi, this patch and ML 10.8.2 have enabled my etron ej168 usb 3.0.The problem is that sleep/wake cycle disables usb 3.0 again. Addition to dsdt.aml didn't work as well. "AAPL,current-available", 0x0834, "AAPL,current-extra", 0x0898, "AAPL,current-extra-in-sleep", 0x0640, "AAPL,max-port-current-in-sleep", 0x0834, "AAPL,device-internal", 0x00, Thanks for any help. Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1856228 Share on other sites More sharing options...
carbo178 Posted October 26, 2012 Share Posted October 26, 2012 Hi, I tried to enter the code in the DSDT for my mobo, but I could not do it, I don't understand where mistake. I opened a topic in the Italian section enclosing DSDT and IOreg, if someone could take a look ... Thanks in advance P.S. Sorry for my bad English (google translate) Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1863242 Share on other sites More sharing options...
existation Posted November 12, 2012 Share Posted November 12, 2012 Did not work for me this patch. Have asus p8z68v-pro. Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1866291 Share on other sites More sharing options...
Riley Freeman Posted November 12, 2012 Share Posted November 12, 2012 Did not work for me this patch. Have asus p8z68v-pro. If you have ASM1042 use the Caldigit drivers and DSDT edit from here. Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1866330 Share on other sites More sharing options...
existation Posted November 13, 2012 Share Posted November 13, 2012 Thanks a lot! I will try at home ))) Link to comment https://www.insanelymac.com/forum/topic/281046-native-usb30-on-boards-with-non-intel-usb3-eg-asmedia/#findComment-1866499 Share on other sites More sharing options...
Recommended Posts