Jump to content

[Guide] The all-in-one guide to Vanilla OS X (including Chameleon + DSDT) for beginners (updated for Yosemite!)

rockinron_1
 Share
889 posts in this topic

Recommended Posts

catalinz
catalinz
Posted
Posted

Hello,

 

Thx for the tips, but same low resolution, only 1 kext was frmo amd and 69 0 0xffffff7f81a9c000 0x3b7000 0x3b7000 com.apple.AMDRadeonAccelerator (1.0.6) <68 60 59 10 7 5 4 3 1>

I also switched variations of combinations, i normaly used DisplayPort, and i switched to HDMI port same, something is not good, and lots of deinterlactions gliches, like a videocard with no drviers or monitor drivers. Check also pics maybe you can find the problem, i tried a lot of combinations dont know what to do more my discrete is HIS ATI HD 5670, but in pci.ids.gz pcilib is Redwood.

Than at About My Mac: IMac, 27-inch (right size monitor), Mid 2011 and video card not recognized: Graphics Display 5 MB, before atirom and enbabler was 3 or 2 mb :) spdisplays_display 1400 x 1050

 

00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09)

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)

00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 05)

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5)

00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5)

00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev b5)

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)

00:1f.0 ISA bridge [0601]: Intel Corporation Z68 Express Chipset Family LPC Controller [8086:1c44] (rev 05)

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 05)

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Redwood XT [Radeon HD 5670] [1002:68d8]

01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Redwood HDMI Audio [Radeon HD 5000 Series] [1002:aa60]

03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042]

04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042]

05:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 01)

post-1161716-0-74726000-1368629999_thumb.png

post-1161716-0-43965500-1368630008_thumb.png

Link to comment
Share on other sites
catalinz
catalinz
Posted
Posted

I tried to install again with Kext Wizard the kexts you said on S/L/E where i also found them: AMDRadeonAccelerator.kext / ATISupport.kext / ATI5000Controller.kext / ATIFramebuffer.kext and after reboot, nothing happend, and most important those kexts now dissapeared strong>ression.gif how i get them back, i also deleted from the USB Install when i could not load the setup.

 

LE: i found them in Time Machine and also in the Backup Image :D :D

 

U said in that guide from olaria:

artur-pt wrote:

hello

 

This is a native cards

 

ATI Radeon HD 5630 Device ID 0x68D8

ATI Radeon HD 5630 Device ID 0x68D9

ATI Radeon HD 5670 Device ID 0x68D8

ATI Radeon HD 5730 Device ID 0x68D8

ATI Radeon HD 5770 Device ID 0x68B8

ATI Radeon HD 5850 Device ID 0×6899

ATI Radeon HD 5870 Device ID 0×6898

AMD Radeon HD 6850 Device ID 0×6739

AMD Radeon HD 6870 Device ID 0×6738

AMD Radeon HD 6970 Device ID 0×6718

 

but this is hack...

 

buy sapphire

 

good hack

So if my card is native it should work with no modification right? or i need to edit the device ID to make it native work? this is my exact video: HIS HD5670 ICEQ, 1024MB, 128bit, GDDR5, PCI-E [H567Q1GD]

 

In about this mac:

Display:

Type: GPU

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 5 MB

Vendor: ATI (0x1002)

Device ID: 0x68d8

Revision ID: 0x0000

Kernel Extension Info: No Kext Loaded

Displays:

Display:

Resolution: 1400 x 1050

Pixel Depth: 32-Bit Color (ARGB8888)

Main Display: Yes

Mirror: Off

Online: Yes

 

I even extracted my VIDEO ROM. and put it to load in Extra, nothing, i dont know what i do wrong or is not working, and again other video kexts not loading in stats, dont know what could be, something i dont get it, need a break.

 

Also in System Info app it shows like this:

 

Help!

post-1161716-0-24158600-1368752146_thumb.png

post-1161716-0-38157200-1368752156_thumb.png

Link to comment
Share on other sites
catalinz
catalinz
Posted
Posted

Yo Arthur or who is an expert in Sound on Mac OS!

 

I really need your best help to provide a good solution for my ALC892 Audio onboard sound card to make if fully working in ML 10.8.3, because i need full sound as ill be using music production softwares, as i already read all about it, i dont know wich way is the best, with AppleHDA edit or kext, VoodooHDA or beasts wich i dont like, i want a simple native effective solution that always will work, i dont like hackingtosh with beasts and whatever. thanks in advance!

 

I extracted with Aida64 this detailed info:

 

Device Description: Intel Cougar Point PCH - High Definition Audio Controller [b-3]

Device Description: (Windows) High Definition Audio Bus

Bus Type: PCI

Bus / Device / Function: 0 / 27 / 0

Device ID: 8086-1C20

Subsystem ID: 1043-8410

Revision: 05

Hardware ID: PCI\VEN_8086&DEV_1C20&SUBSYS_84101043&REV_05

 

Device Description: Realtek ALC892

Device Description (Windows): Realtek High Definition Audio

Device Type: Audio

Bus Type: HDAUDIO

Device ID: 10EC-0892

Subsystem ID: 1043-8410

Revision: 1003

Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0892&SUBSYS_10438410&REV_1003

 

Device Description: Intel Cougar Point HDMI

Device Description (Windows): Intel® Display Audio

Device Type: Audio

Bus Type: HDAUDIO

Device ID: 8086-2805

Subsystem ID: 8086-0101

Revision: 1000

Hardware ID: HDAUDIO\FUNC_01&VEN_8086&DEV_2805&SUBSYS_80860101&REV_1000

 

System Info.app s-shot:

post-1161716-0-84684000-1369083199_thumb.png

Link to comment
Share on other sites
artur_pt
artur_pt
Posted
Posted

hello

 

u can try this one

 

http://cl.ly/3d0W0o1N3U1p

 

need to use in HDEF in dsdt

 

into device label HDEF insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
 Store (Package (0x04)\n
	 {\n
		 "layout-id", \n
		 Buffer (0x04)\n
		 {\n
			 0x01, 0x00, 0x00, 0x00\n
		 }, \n
		 "PinConfigurations", \n
		 Buffer (Zero) {}\n
	 }, Local0)\n
 DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))\n
 Return (Local0)\n
}
end

 

or use voodoohda

 

VoodooHDA - common problems

 

or here other kext

 

http://www.insanelymac.com/forum/files/category/4-audio/

 

good hack

Link to comment
Share on other sites
catalinz
catalinz
Posted
Posted

Hello,

 

I downloaded this one as it is for my id, and after i extracted from archive, the kext turn orange color and in show contents other ones turn orange, is this a sign is already working? i didnt put it yet in kext utility to install it

 

http://www.insanelym...hda-for-alc892/

 

LE: ya i think this one is for me

 

Patched AppleHDA v2.3.7fc4 from ML 10.8.3 to use with Realtek ALC892 (10EC:0892).

 

Use layout-id 1 (one).

 

Modified files:

- Contents/MacOS/AppleHDA

- Contents/PlugIns/AppleHDAHardwareConfigDriver.kext/Info.plist

- Contents/Resources/layout1.xml.zlib

- Contents/Resources/Platforms.xml.zlib

 

Now do i need to edit the HDEF in DSDT if is already saying Use layout-id 1 (one).?

post-1161716-0-84719400-1369086131_thumb.png

Link to comment
Share on other sites
catalinz
catalinz
Posted
Posted

is not in dsdt that pattern so i need manual to do it :D, because i looked at dsdt i find the HDEF device, and is not there, and at that point at what line bellow HDEF to insert it, can you PLEASE do it for me, i dont want to be wrong at audio device, and i will look after how u do it, to learn, here is my dsdt.

 

or highlight from where to where to paste:

 

Device (HDEF)

{

Name (_ADR, 0x001B0000)

OperationRegion (HDAR, PCI_Config, 0x4C, 0x10)

Field (HDAR, WordAcc, NoLock, Preserve)

{

DCKA, 1,

Offset (0x01),

DCKM, 1,

, 6,

DCKS, 1,

Offset (0x08),

, 15,

PMES, 1

}

Method (_PRW, 0, NotSerialized)

{

Return (GPRW (0x0D, 0x04))

}

}

Device (SAT0)

{

Name (_ADR, 0x001F0002)

}

Device (SAT1)

{

Name (_ADR, 0x001F0005)

}

Device (SBUS)

{

Name (_ADR, 0x001F0003)

OperationRegion (SMBP, PCI_Config, 0x40, 0xC0)

Field (SMBP, DWordAcc, NoLock, Preserve)

{

, 2,

I2CE, 1

}

OperationRegion (SMPB, PCI_Config, 0x20, 0x04)

Field (SMPB, DWordAcc, NoLock, Preserve)

{

DSDT.aml.zip

Link to comment
Share on other sites
catalinz
catalinz
Posted
Posted

Thx!

 

Hope the DSDT you gave me will not disable my video

Regarding SSDT at bdmesg is auto generating SSDT is this ok or i still need SSDT.aml?

dropssdt is already set yes from start

c and p not :D i uncheck now

null removed didnt install it from start

 

i go read the link u gave me

 

Bdmesg:

 

Customizing SystemID with : 800d001f-c600-0012-2733-f46d04429c54

Read HFS+ file: [hd(0,3)/Extra/DSDT.aml] 47884 bytes.

ACPI table not found: SSDT.aml

FADT: ACPI Restart Fix applied!

FADT: Using custom DSDT!

Found ACPI CPU: CPU0

Found ACPI CPU: CPU1

Found ACPI CPU: CPU2

Found ACPI CPU: CPU3

Found ACPI CPU: CPU4

Found ACPI CPU: CPU5

Found ACPI CPU: CPU6

Found ACPI CPU: CPU7

SSDT with CPU C-States generated successfully

P-States: min 0x10, max 0x22

SSDT with CPU P-States generated successfully

RSDT: Added 2 SSDT table(s)

FADT: ACPI Restart Fix applied!

FADT: Using custom DSDT!

Added 2 SSDT table(s) into XSDT

Errors encountered while starting up the computer.

Pausing 5 seconds...

Starting Darwin x86_64

Boot Args: boot-uuid=8A34E6D9-9269-3E7C-BA12-C900F1C47C08 rd=*uuid darkwake=0

EHCI controller [8086:1c2d] at 00:1a.0 DMA @f7c28000

Setting Legacy USB Off on controller [8086:1c2d] at 00:1a.0

Legacy USB Off Done

EHCI controller [8086:1c26] at 00:1d.0 DMA @f7c27000

Setting Legacy USB Off on controller [8086:1c26] at 00:1d.0

Legacy USB Off Done

Read HFS+ file: [hd(0,3)/Extra/Themes/Default/boot.png] 6231 bytes.

Link to comment
Share on other sites
artur_pt
artur_pt
Posted
Posted

hello

 

read the guide..

 

is there a script to generate a proper ssdt...

 

to achieve a correct speedstep of u cpu...

 

is a crime.. u don't have a proper power management

 

read.. i say before ... to have a hack must read.. and is always a work in progress..

 

 

good hack

Link to comment
Share on other sites
catalinz
catalinz
Posted
Posted

ok i read and generate ssdt ;)

 

what u mean: is a crime.. u don't have a proper power management? you mean about SSDT Speedstep etc? i dont have null.kext on the system, i deleted also from the install usb i maked, i have pmpatched my bios. so i need to do something more?

 

well i am in progress, i managed alone to install network, right VIDEO, right MONITOR 3 days took me only video :|, dont think im not working my ass out here :D

Link to comment
Share on other sites
catalinz
catalinz
Posted
Posted

Hello,

 

Yes i undestand i was not sure if you refer to null or speedstep cpu etc, ill generate ssdt for all to be good ;)

 

Another issue, when im browsing with Finder in folders, it works very hard, and also when i click to open folders it is lasting a bit till is opening, i also put all to fast in keyboard and mouse settings but is not so fast like in windows, this is the way mac os work or i have to change something?

Link to comment
Share on other sites
catalinz
catalinz
Posted
Posted

Well at about this mac, it shows 5000 not 5670 :| but maybe thats the way it works

 

ATI Radeon HD 5000:

 

Chipset Model: ATI Radeon HD 5000

Type: GPU

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 1024 MB

Vendor: ATI (0x1002)

Device ID: 0x68d8

Revision ID: 0x0000

Displays:

S27A950D:

Resolution: 1920 x 1080 @ 60 Hz

Pixel Depth: 32-Bit Color (ARGB8888)

Main Display: Yes

Mirror: Off

Online: Yes

Rotation: Supported

Television: Yes

 

at kext stats:

 

63 2 0xffffff7f814df000 0x72000 0x72000 com.apple.kext.AMDSupport (8.1.0) <61 10 9 7 5 4 3 1>

64 0 0xffffff7f8156d000 0x1e1000 0x1e1000 com.apple.kext.AMD5000Controller (8.1.0) <63 61 10 9 5 4 3 1>

67 0 0xffffff7f81d71000 0x3b7000 0x3b7000 com.apple.AMDRadeonAccelerator (1.0.6) <66 65 61 10 7 5 4 3 1>

92 0 0xffffff7f81551000 0x14000 0x14000 com.apple.kext.AMDFramebuffer (8.1.0) <63 61 10 9 7 5 4 3 1>

 

lspci:

 

localhost:~ zzzzzz$ lspci -b -nn

pcilib: 0000:01:00.0 64-bit device address ignored.

pcilib: 0000:00:02.0 64-bit device address ignored.

00:02.0 Display controller [0380]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0122] (rev 09)

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Redwood XT [Radeon HD 5670] [1002:68d8]

01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Redwood HDMI Audio [Radeon HD 5000 Series] [1002:aa60]

 

So why in about this mac is not showing 5670 and is showing 5000? in the rest all is fine, max resolution 120 mhz etc, all ports working, just this delay in browsing in finder and clicking in folders, and mouse settings are set as fast all. I know the kext AMD5000Controller is for all 5xxx but, why in about my mac is not showing 5670 :|

 

I check now what you said, thx!

 

use openclextensionviewer is free in apple store...

 

I dont find it i find maybe u mean this one? OpenGL Extensions Viewer? https://itunes.apple.com/ro/app/opengl-extensions-viewer/id444052073?mt=12

Link to comment
Share on other sites
catalinz
catalinz
Posted
Posted

Yo arthur!

 

Please when you have time, answer at all questions so i can understand clear, thx!

 

From here: http://olarila.com/f...php?f=28&t=1703

 

I downloaded the script, my cpu is i7-2600k and has TDP 95W, but the Turbo Frequency how much i set? how much i want or how much it is at default. now i dont have it overclocked, is at 3,400, or set in the script to the max of 4,200 that mac os can allow? sudo ./ssdtPRGen.sh 95 ????

 

I generated 95 3400, if is not right 3400 tell me, see attached, i need too rename extension to .aml right and put it in extra folder? or Compile with DSDT edtior and than put it in extra folder? Also do i need SSDT-1?

 

Customizing SystemID with : 800d001f-c600-0012-2733-f46d04429c54

Read HFS+ file: [hd(0,3)/Extra/DSDT.aml] 48464 bytes.

Read HFS+ file: [hd(0,3)/Extra/SSDT.aml] 8072 bytes.

ACPI table not found: SSDT-1.aml

FADT: ACPI Restart Fix applied!

FADT: Using custom DSDT!

RSDT: Added 1 SSDT table(s)

FADT: ACPI Restart Fix applied!

FADT: Using custom DSDT!

Added 1 SSDT table(s) into XSDT

Errors encountered while starting up the computer.

Pausing 5 seconds...

Starting Darwin x86_64

Boot Args: boot-uuid=8A34E6D9-9269-3E7C-BA12-C900F1C47C08 rd=*uuid darkwake=0 -v

 

Also is some confusion there:

Put SSDT.aml in Extra folder, enable the option DropSSDT, disable GeneratePStates and GenerateCStates.

 

Chameleon can generate P and C states automatically, simply enable the options

Code:

<key>GeneratePStates</key>

<string>Yes</string>

<key>GenerateCStates</key>

<string>Yes</string>

First it says disable P&C-States and then Chameleon Enable with Yes strings :) so wich one to set? :D Disable or Enable?

 

Do i need to apply the AICPMPatch.zip or just move the SSDT to Extra folder?

 

Maybe i get slow browsing in Finder and slow opening of the folders because my hard drives are not recognized as internal, after i finished installed the Mac OS, the hard drives icons apear normal, but i have in Bios the option HotPlug that i enabled, and than the drives icons turned orange in Mac OS, so is this why i get slow browse and should i turn in Bios HotPlug Off or use the sata.dylib in chameleon modules or is not this the problem?

Link to comment
Share on other sites
artur_pt
artur_pt
Posted
Posted

hello

 

only need ssdt.aml, the file script generate rename to it, no ssdt-1

 

set dropssdt=yes p and cstates=no

 

to use the states in ssdt file u generate

 

if u don't have kp in appleintelcpupowermanagement.kext u don't need to patch it

 

about u hd must test and change in bios

 

now if no OC just use the ssdt with stock mhz to the cpu.. only OC when all in system stable.. to test it

 

post also

 

a full bdmesg from u boot with chameleon wizard

 

good hack

Link to comment
Share on other sites
presso
presso
Posted
Posted

When I install Mac os x in virtual machine at the end I get this

 

218bcf1a10e49310.PNG

 

When I click ignore it stuck.. on black window... And then when I try to install it again when I chose a drive there is with 5 gb less..

What I need to do ?

Link to comment
Share on other sites
artur_pt
artur_pt
Posted
Posted

When I install Mac os x in virtual machine at the end I get this

 

218bcf1a10e49310.PNG

 

When I click ignore it stuck.. on black window... And then when I try to install it again when I chose a drive there is with 5 gb less..

What I need to do ?

 

hello

 

here is not the proper place to post about VB

 

http://www.insanelym...virtualisation/

 

good VB

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...