165 replies to this topic

[MaLd0n]

MikOnMac, on Jun 15 2011, 06:46 PM, said:

Sorry MaLd0n but there are compilation errors:

[Line 6647 type Error message Object does not exist (ATT3)]
[Line 7773 type Error message Object does not exist (\_SB.PCI0.EHC2.HCBO)]
[Line 7774 type Error message Object does not exist (\_SB.PCI0.EHC2.HCOO)]

does it takes a long time to fix them or there is something I can do myself?

Use original DSDT

send me your DSDT

[MikOnMac]

Here is original aml and dsl.
No patchs seleted when running DSDT Auto Patcher.
Is it what you need?

Attached Files

•  DSDT.zip   30.64K   24 downloads

[MaLd0n]

MikOnMac, on Jun 16 2011, 03:02 AM, said:

Here is original aml and dsl.
No patchs seleted when running DSDT Auto Patcher.
Is it what you need?

Gigabyte? HaHaHa
 dsdt.MikOnMac.zip   10.13K   52 downloads

[MikOnMac]

MaLd0n, on Jun 16 2011, 05:02 PM, said:

Gigabyte? HaHaHa
dsdt.MikOnMac.zip

First of all thanks a lot!
But sorry, I don't like "pappa pronta" as we say in Italy, or everything already done :-))))
Let me understand.
I have also obtained a DSDT removing from patch.txt

into device name_hid PNP0103 insert
begin
Method (_CRS, 0, NotSerialized)\n
{\n
	Return (ATT3)\n
}
end;

and

        

Store (Zero, \_SB.PCI0.EHC2.HCBO)\n
		Store (One, \_SB.PCI0.EHC2.HCOO)\n

        
What have you done instead?
Can you send patch.txt that you have used?

[MaLd0n]

MikOnMac, on Jun 16 2011, 12:26 PM, said:

What have you done instead?
Can you send patch.txt that you have used?

I applied manually
compare the two DSDTs

[MikOnMac]

MaLd0n, on Jun 16 2011, 05:41 PM, said:

I applied manually
compare the two DSDTs

OK.
Thanks.

[wem3]

Hi,

I've been using a DSDT from tonymacx86's database, but I wholeheartedly agree with your suggestion that I should use the DSDT from my own box rather than a pre-compiled one.

When I use the DSDT Auto-Patcher, I get the following error messages (and a suggestion to post em' to this forum):

[Line 227 type Error message Object does not exist (\_SB.PCI0.PX40.AG3E)]
[Line 233 type Error message Object does not exist (\_SB.PCI0.PX40.AG3E)]

I have a mild overclock, do I need to set my bios back to stock to use the patcher?

Snow Leopard 10.6.7
i7-920 overclocked to 3 GHz (increased base clock to 160Hz from 133Hz)
Gigabyte GA X58A-UD3R rev 1.0 (F6 Bios)
12 GB 1033Hz DDR3 (6 x 2 2GB OCZ)
GeForce 210 512 MB (NVIDIA)

Thanks very much!

~Will

(I tried to upload my DSDT.aml, but got "Upload failed. You are not permitted to upload this type of file.")

[MaLd0n]

wem3, on Jun 16 2011, 10:55 PM, said:

Hi,

I've been using a DSDT from tonymacx86's database, but I wholeheartedly agree with your suggestion that I should use the DSDT from my own box rather than a pre-compiled one.

When I use the DSDT Auto-Patcher, I get the following error messages (and a suggestion to post em' to this forum):

[Line 227 type Error message Object does not exist (\_SB.PCI0.PX40.AG3E)]
[Line 233 type Error message Object does not exist (\_SB.PCI0.PX40.AG3E)]

I have a mild overclock, do I need to set my bios back to stock to use the patcher?

Snow Leopard 10.6.7
i7-920 overclocked to 3 GHz (increased base clock to 160Hz from 133Hz)
Gigabyte GA X58A-UD3R rev 1.0 (F6 Bios)
12 GB 1033Hz DDR3 (6 x 2 2GB OCZ)
GeForce 210 512 MB (NVIDIA)

Thanks very much!

~Will

(I tried to upload my DSDT.aml, but got "Upload failed. You are not permitted to upload this type of file.")

use original DSDT
extract from windows and aplly

zip files and upload

[wem3]

MaLd0n, on Jun 17 2011, 03:24 AM, said:

use original DSDT
extract from windows and aplly

zip files and upload

Is there any way to do it without Windows?  Sorry, but I don't even have access to a Windows box.  If need be, I can try to find a copy and install it on an extra drive.  Thanks again for your help!

[MaLd0n]

wem3, on Jun 16 2011, 11:54 PM, said:

Is there any way to do it without Windows?  Sorry, but I don't even have access to a Windows box.  If need be, I can try to find a copy and install it on an extra drive.  Thanks again for your help!

send me your DSDT
run on terminal

perl -e 'open(CMD, "ioreg -lw0 \| grep DSDT|") or die; while(<CMD>) { chomp; if($_ =~ /\"DSDT\.?\d?\"=<([^>]*)>/) { $buff = $1; open(PIP, "|xxd -r -p > ~/Desktop/dsdt.aml") or die; print PIP "$1"; } }'

generate in desktop

[wem3]

MaLd0n, on Jun 17 2011, 04:00 AM, said:

send me your DSDT
run on terminal

My apologies for being obtuse.  I rebooted w/o DSDT and used the autopatcher to extract a clean dsdt.aml, but am still not permitted to attach it (when you say send it to you, do you mean via PM?)

I used your 'runme.app' before and after rebooting w/o a DSDT (after modifying my Extra folder), and attached both send_me.zips.  If this is wrong, please let me know.

I can't tell you how much I appreciate your help.  I reconfigured my system a few weeks ago to put it on an SSD, and used tonymacx86's method (as opposed to the DD style install I did initially), but have come to find that this method leaves me with less access to what's really going on.  

Is it possible to clean up this install, or should I just nuke it altogether and start afresh with your updated method?

Thanks again.


Ah, crud.  Sorry, I didn't see you last post before replying.  I reconfigured with these clunky kexts so that I could get a clean DSDT (I thought it was necessary to do so).  

Would it be better if I restored my last configuration and then used the code you suggested?

Attached Files

•  send_me_ORIG.zip   155.98K   3 downloads
•  send_me.zip   144.04K   2 downloads

[MaLd0n]

wem3, on Jun 17 2011, 01:47 AM, said:

...

this DSDT that you're using is very incomplete
use it
 dsdt.wem3.zip   5.78K   11 downloads

add in boot.plist

<key>GeneratePStates</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>

[wem3]

Thanks most kindly.  However, I'm afraid I've subsequently broken my audio.  My boot is also considerably slower.  The dsdt.aml file that you gave me is already patched, correct? If not, do I apply relevant patches, or leave it alone altogether? Sorry to be a hassle...

[MaLd0n]

wem3, on Jun 17 2011, 04:25 AM, said:

Thanks most kindly.  However, I'm afraid I've subsequently broken my audio.  My boot is also considerably slower.  The dsdt.aml file that you gave me is already patched, correct? If not, do I apply relevant patches, or leave it alone altogether? Sorry to be a hassle...

the DSDT already have all you need
send me a log

cat /var/log/kernel.log

and

ioreg -lw0 | grep CSTInfo

and

kextstat

run on terminal
save .txt

[wem3]

sent.

[MikOnMac]

MaLd0n, on Jun 16 2011, 05:02 PM, said:

Gigabyte? HaHaHa
dsdt.MikOnMac.zip

Your DSDT didn't solved AppleACPIPlatform kernel panic.
Do you think some other patch is needed?

[MaLd0n]

MikOnMac, on Jun 17 2011, 07:56 AM, said:

Your DSDT didn't solved AppleACPIPlatform kernel panic.
Do you think some other patch is needed?

nope
this problem has occurred frequently
I do not know what can be

[wem3]

MaLd0n, on Jun 17 2011, 08:32 AM, said:

the DSDT already have all you need
send me a log

Apologies, when you say send, do you mean that this sort of info should be posted here rather than PM'd to you?

If I were to reinstall in order to clean my system of any iBoot/multibeast residuals (as I'm not really certain what kexts, if any, it installs to S/L/E rather than just E/E), would I need to extract a new, pristine DSDT and then patch it, or could I continue to use the one you provided?

I would need to further modify it if changing the BCLK, right?

Thanks.

[MaLd0n]

wem3, on Jun 17 2011, 03:49 PM, said:

Apologies, when you say send, do you mean that this sort of info should be posted here rather than PM'd to you?

If I were to reinstall in order to clean my system of any iBoot/multibeast residuals (as I'm not really certain what kexts, if any, it installs to S/L/E rather than just E/E), would I need to extract a new, pristine DSDT and then patch it, or could I continue to use the one you provided?

I would need to further modify it if changing the BCLK, right?

Thanks.

yep
post here, no problem

use a fresh install, use Extra MacPro4,1
use Auto-patcher and HDEF Gigabyte

[Renard45]

doesn't work for me on my G41MT-D3 still have errors i can not have instal screen    please help