Jump to content

Snow Leopard on Gigabyte Mobos


168 posts in this topic

Recommended Posts

send me your DSDT

run on terminal

 

My apologies for being obtuse. I rebooted w/o DSDT and used the autopatcher to extract a clean dsdt.aml, but am still not permitted to attach it (when you say send it to you, do you mean via PM?)

 

I used your 'runme.app' before and after rebooting w/o a DSDT (after modifying my Extra folder), and attached both send_me.zips. If this is wrong, please let me know.

 

I can't tell you how much I appreciate your help. I reconfigured my system a few weeks ago to put it on an SSD, and used tonymacx86's method (as opposed to the DD style install I did initially), but have come to find that this method leaves me with less access to what's really going on.

 

Is it possible to clean up this install, or should I just nuke it altogether and start afresh with your updated method?

 

Thanks again.

 

 

Ah, crud. Sorry, I didn't see you last post before replying. I reconfigured with these clunky kexts so that I could get a clean DSDT (I thought it was necessary to do so).

 

Would it be better if I restored my last configuration and then used the code you suggested?

send_me_ORIG.zip

send_me.zip

Thanks most kindly. However, I'm afraid I've subsequently broken my audio. My boot is also considerably slower. The dsdt.aml file that you gave me is already patched, correct? If not, do I apply relevant patches, or leave it alone altogether? Sorry to be a hassle...

Thanks most kindly. However, I'm afraid I've subsequently broken my audio. My boot is also considerably slower. The dsdt.aml file that you gave me is already patched, correct? If not, do I apply relevant patches, or leave it alone altogether? Sorry to be a hassle...

 

the DSDT already have all you need

send me a log

cat /var/log/kernel.log

and

ioreg -lw0 | grep CSTInfo

and

kextstat

run on terminal

save .txt

the DSDT already have all you need

send me a log

 

Apologies, when you say send, do you mean that this sort of info should be posted here rather than PM'd to you?

 

If I were to reinstall in order to clean my system of any [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]/[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] residuals (as I'm not really certain what kexts, if any, it installs to S/L/E rather than just E/E), would I need to extract a new, pristine DSDT and then patch it, or could I continue to use the one you provided?

 

I would need to further modify it if changing the BCLK, right?

 

Thanks.

Apologies, when you say send, do you mean that this sort of info should be posted here rather than PM'd to you?

 

If I were to reinstall in order to clean my system of any [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]/[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] residuals (as I'm not really certain what kexts, if any, it installs to S/L/E rather than just E/E), would I need to extract a new, pristine DSDT and then patch it, or could I continue to use the one you provided?

 

I would need to further modify it if changing the BCLK, right?

 

Thanks.

 

yep

post here, no problem

 

use a fresh install, use Extra MacPro4,1

use Auto-patcher and HDEF Gigabyte

;)

ok i have this:

 

photo004cd.th.jpg

 

Uploaded with ImageShack.us

 

sorry for the crappy quality...

Are you runing oced CPU? If you are, i had a few problems with my PC. Just set a def MUTLY and FSB for your clock (exp: 3200 > 320 * 10 instand od 400*8).

____

 

Ok, i need AppleHDA i ALC889A for my bord, MaLd0n past something :)

what i don't understand? you think i must specify the fsb for my cpu? :)

I mean if you set overclock that not use a default multy of your cpu. My setup was 3200 (def 10) but, i used 400 fsb with multy 8 to achive 3200 mhz. After update only 3200 is possible with def multy 10. Any other > KP.

  • 2 weeks later...

HackBoot discs don't boot. I've tried with V5, V6 and V6.2.

All of them begin to load from HD and then reboot.

 

Maybe these screen shots will help.

 

I start by loading from any HackBoot CD, in this case, v6.2

 

This is my Video Card: Sentey nVidia G210 1GB DDR3

post-427941-1309965648_thumb.jpg

 

Then, my Mobo: Gigabyte H61M-D2P-B3 Rev 1 Bios F5 with an Intel i3 2100 1155

 

post-427941-1309965830_thumb.jpg

 

Bios is set in AHCI mode:

 

post-427941-1309965869_thumb.jpg

 

post-427941-1309968816_thumb.jpg

 

Then I choose Verbose

 

post-427941-1309968847_thumb.jpg

 

 

at this last line, it goes blank and the system reboots. I cannot pass this point.

In the HD SL installation I copied Extra 12.1 folder I downloadad from this thread and installed Chameleon RC5 just as you described. The system won't load without CD loader (only [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]).

 

Any idea what can be causing this? [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] method didn't work either.

 

Thank you very much in advance,

 

Diego

×
×
  • Create New...