681 replies to this topic

[kizwan]

akbarmoradi, on Apr 5 2011, 01:47 PM, said:

can you plz post smbios.plist with imac 10.1.

This is smbios.plist with machine identifier set to iMac10,1. Please install it in Extra folder. With iMac10,1 as machine identifier, you should get native speedstep support. You can observed it using an application called MSR Tools in 32bit mode.
 iMac10_1.zip   510bytes   70 downloads

[kizwan]

akbarmoradi, on Apr 5 2011, 02:57 PM, said:

ok I am compare my ioregistery with mucha one in mucha show gfx0 but in mine show vga .did i need dsdt editing?

No need to. It's just cosmetic.

akbarmoradi, on Apr 5 2011, 02:57 PM, said:

and other problem when i tray to open dvd file with dvd player it kernel panic with atix2000.kext depenency error
iokit . iopcifamiliy
iokit . iondvrsupport
iokit . iographics familiy error

This is hard to troubleshoot. May I know list of legacy/foreign kexts you're using?

akbarmoradi, on Apr 5 2011, 02:57 PM, said:

i will get my rom dump and post in configuration forum as soon as posible.
thanks

Thank you very much!

[Cyrus the Great]

thanks it work for me and now i have gpu control and imac 10.1.
the kext in my /e/e is(AppleACPIBatteryManager.kext AppleACPIPS2Nub.kext FakeSMC.kext GenericBrightness.kext LegacyHDA.kext VoodooPS2Controller.kext )
and also i use usbpcifamiliyfix and usbdriverfix in /s/l/e/
i dont now what is problem when first time i install it dvd player play but now its get error and kernel panic.
thanks

[kizwan]

akbarmoradi, on Apr 5 2011, 03:34 PM, said:

thanks it work for me and now i have gpu control and imac 10.1.
the kext in my /e/e is(AppleACPIBatteryManager.kext AppleACPIPS2Nub.kext FakeSMC.kext GenericBrightness.kext LegacyHDA.kext VoodooPS2Controller.kext )
and also i use usbpcifamiliyfix and usbdriverfix in /s/l/e/
i dont now what is problem when first time i install it dvd player play but now its get error and kernel panic.
thanks

I know GenericBrightness.kext but I never tried it. I never heard of usbpcifamiliyfix and usbdriverfix. Try removed these three kexts & see if that cure kernel panic with DVD Player.

BTW, can you post your new IORegistry dump? I just want to look.

[kizwan]

akbarmoradi, on Apr 5 2011, 05:24 PM, said:

but when i remove this kext my webcam  and some time my usb port dosent work.
is there any whay to get usb work without this kext ?

There are Chameleon's built-in fix for USB. Try boot with USBBusFix=Yes.

[Cyrus the Great]

ok thanks.
the dvd player it not matter for me i am using vlc .
this new registery dump

Attached Files

•  akbar_moradi___s_MacBook_Pro_new_dump.zip   509.25K   6 downloads

[kizwan]

akbarmoradi, on Apr 5 2011, 06:46 PM, said:

ok thanks.
the dvd player it not matter for me i am using vlc .
this new registery dump

Thank you! I'll look into it later. If I found anything you can optimized further, I'll let you know.

almuras, on Apr 5 2011, 12:21 PM, said:

http://dl.dropbox.co...rine dump.ioreg
http://dl.dropbox.co...rike dump.ioreg
http://dl.dropbox.co...rvet dump.ioreg

I has look to your IORegistry dumps & I found ATIRadeonX2000.kext is not loaded. Hmmm...I think probably you'll need to solved your Mac OS X setup problem first.

There is one person who have identical notebook as mine (Dell Studio 1557) but he/she have internal Full HD LCD panel (1920x1080). He/she already tried the same modified boot file I gave you which injecting new property for the ATI graphic card but the results still the same; internal LCD blank. Latest 17" MacBookPro8,3 also have internal LCD with higher resolution than 1336x768 & it's used LVDS. So, what is the different with ours???? I know Dell Studio 1557 has LVDS interface which support dual-link/two channel LVDS transmitter because I has the schematic. Probably the OS X's driver only provided support for dual-link LVDS on several GPU only which could explain why we can't get ours to work. I think we will need to examine the iMac's IORegistry since our ATI is 4xxx & 5xxx. I already look in iMac11,1's IORegistry. It's used DP_INT instead of LVDS.

[almuras]

In system profiler I always see ATIRadeonX2000.kext loaded

[nono_nono]

Hey kizwan,can you give me your kexts??,i want to try,is np if is not gonne work,i have radeon hd 4650 1gb ddr3 [0x9480] plzzzzzzzzz plzzzzzzzzz

[almuras]

No, you are right, kizwan, I do not see ATIRadeonX2000.kext loaded.  What can prevent it?
Thanks!

[Cyrus the Great]

nono_nono, on Apr 5 2011, 06:02 PM, said:

Hey kizwan,can you give me your kexts??,i want to try,is np if is not gonne work,i have radeon hd 4650 1gb ddr3 [0x9480] plzzzzzzzzz plzzzzzzzzz

this patched frambuffer with shrike this work for me.
Attached File(s)   ATIFramebuffer.kext.rar
so if your laptop is hp it may work for you try it and dont forgot to do disk premision repair after installin this kext.

[kizwan]

akbarmoradi, on Apr 5 2011, 06:46 PM, said:

this new registery dump

You can patch LPC device in DSDT. It help the processor run much cooler. You can go over here to learn how to patch LPC device (in my DSDT the LPC device is named LPCB).

almuras, on Apr 6 2011, 01:08 AM, said:

No, you are right, kizwan, I do not see ATIRadeonX2000.kext loaded.  What can prevent it?
Thanks!

I'm not sure. Try fix your setup first. Get rid all unnecessary kexts like nullcpupowermanagement.

[kizwan]

akbarmoradi, on Apr 6 2011, 02:58 AM, said:

You can patch LPC device in DSDT. It help the processor run much cooler. You can go over here to learn how to patch LPC device (in my DSDT the LPC device is named LPCB).

thanks

i have idt audio like you kizwan can you post your idt kext.
thanks

You can find the audio kext at the same place.

[Cyrus the Great]

hi nano_nano this instalation kext-com.apple.boot.plist  -smbios -boot file- that i have used and my card get working .
this from 10.6.7 patched kext.before installing update to 10.6.7
place boot file in your mac os x root drive

Attached Files

•  installtion.zip   1.01MB   28 downloads

[almuras]

kizwan, on Apr 5 2011, 06:19 PM, said:

You can patch LPC device in DSDT. It help the processor run much cooler. You can go over here to learn how to patch LPC device (in my DSDT the LPC device is named LPCB).


I'm not sure. Try fix your setup first. Get rid all unnecessary kexts like nullcpupowermanagement.

Kizwan, I fixed the setup, removed all foreign kexts, and reinstal 10.6.7 update.  I used your boot files and smbios.
This time all video kexts were loaded as you can see from the dumps. However, I still have only HDMI working.
I attached the dumps.


Will greatly appreciate your help to get LVDS working . Thanks a lot!!!  

http://dl.dropbox.co...rine dump.ioreg
http://dl.dropbox.co...rike dump.ioreg
http://dl.dropbox.co...rvet dump.ioreg

[kizwan]

almuras, on Apr 7 2011, 02:04 AM, said:

Kizwan, I fixed the setup, removed all foreign kexts, and reinstal 10.6.7 update.  I used your boot files and smbios.
This time all video kexts were loaded as you can see from the dumps. However, I still have only HDMI working.
I attached the dumps.


Will greatly appreciate your help to get LVDS working . Thanks a lot!!!  

http://dl.dropbox.co...rine dump.ioreg
http://dl.dropbox.co...rike dump.ioreg
http://dl.dropbox.co...rvet dump.ioreg

That's more like it. OK, there is one person told me he/she got internal LCD screen with resolution 1920x1080 working (have the same notebook as mine, Dell Studio 1557). Please try this standard boot file:-
 boot.standard.0x9480.shrike.zip   192.49K   15 downloads
This is standard boot file compiled from trunk. I only set your graphic card to use Shrike framebuffer in this boot file.

[Derc]

Hi kizman! Help me please with my graphics card! I have a ATI Radeon Mobility 4570 512 mb on a notebook ASUS k40ad. On a laptop only output the VGA and LVDS with a maximum resolution of 1366x768. I tried to use your framebuffer but apparently it does not work for me. Please tell me what I need to do to get my card working? Could you tell me more as I get radeondump? I'll be very grateful for your help!

[sydlix]

kizwan, on Apr 7 2011, 05:24 PM, said:

That's more like it. OK, there is one person told me he/she got internal LCD screen with resolution 1920x1080 working (have the same notebook as mine, Dell Studio 1557). Please try this standard boot file:-
boot.sta...0.shrike.zip
This is standard boot file compiled from trunk. I only set your graphic card to use Shrike framebuffer in this boot file.

Kizwan if you look at the radeondump of the person who got the fullhd panel working on 4650 you see he set 02 00 TR/ENC values but it's radeonhd log said "mapping dig2 on uniphyE". DIG2 should be 01, mine says DIG1 and should be 00.

[almuras]

kizwan, on Apr 7 2011, 06:24 PM, said:

That's more like it. OK, there is one person told me he/she got internal LCD screen with resolution 1920x1080 working (have the same notebook as mine, Dell Studio 1557). Please try this standard boot file:-
boot.sta...0.shrike.zip
This is standard boot file compiled from trunk. I only set your graphic card to use Shrike framebuffer in this boot file.

It did not work.  But we already  tried several boot files and framebuffurers....

[kizwan]

sydlix, on Apr 8 2011, 04:30 AM, said:

Kizwan if you look at the radeondump of the person who got the fullhd panel working on 4650 you see he set 02 00 TR/ENC values but it's radeonhd log said "mapping dig2 on uniphyE". DIG2 should be 01, mine says DIG1 and should be 00.

May I know who is the person got his/her 4650 & full HD screen working (fully working)? I already tested transmitter 0x02 with two notebooks but none of them works. However, the second person who have the same notebook as mine but with full HD LCD able to get it working with transmitter 0x12. Actually he/she just use my first patched ATIFramebuffer.kext which use different encoder than the one stated in the RadeonHD's log. Almost all notebooks use LVDS for internal LCD panel but looks like not all use the same technology. As for now, based on the test conducted, the encoder & transmitter are not important as long as the link are not conflicted with each other, e.g LVDS vs. HDMI. What important are ControlFlags & senseid.

almuras, on Apr 8 2011, 08:58 AM, said:

It did not work.  But we already  tried several boot files and framebuffurers....

The boot file does work right? but only HDMI is working right?

Based on this success report, I'm going to sent you a patched ATIFramebuffer.kext for you to test. I'll sent it in 30 minutes.