Posted 25 September 2011 - 07:36 AM
I got my Point of View 8400GS 512 mb PCIe 2.0 running on 10.6.8 64 bit
So far only method that partially works is editing plist in NVDANV50Hal.
I've tried all the methods mentioned here but there is no way to get DVI and VGA work simultaneously.
<string>y</string> No difference
<string>[EFI string generated with OSX Tool]</string> No difference
NVEnabler64.kext + NVinject.kext a lot of lines during boot ending with "Failed"
n.b. Chameleon is set up to use org.chameleon.Boot.plist so I've made all changes there instead of in com.apple.Boot.plist.
Can someone help me out here?
GeForce 8400 GS:
Chipset Model: GeForce 8400 GS
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x10c3
Revision ID: 0x00a2
ROM Revision: 70.18.FF.00.A4
Resolution: 1440 x 900 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: 79LMTF004629
Main Display: Yes
Status: No Display Connected <<<VGA DLP beamer connected!
Posted 30 September 2011 - 12:12 PM
Have you tried setting display-cfg in NVEnabler or Chameleon?
There's also this kext which is reported as working with both outputs, it's i386 only but you can get NVCAP from it
As far as I know, I've tried every method there is. Until now I can chose either for fully working DVI or DVI + VGA without qe/ci (all resolutions). If I understand the issue correctly, my card has a different display layout.
What I probably need is a correct NVCAP not an edited kext or something like that.
PROBLEM SOLVED! it was vncap issue
Posted 27 October 2011 - 06:30 PM
Posted 29 October 2011 - 11:49 AM
I just swapped my Point of view 8400gs with PNY 8400GS and after editing nvdan50hal.kext got it fully working after first reboot. But now it comes, after second reboot system stalls at PCI configuration begin despite npci=0x2000
Posted 20 May 2013 - 12:31 AM
Edit the Info.plist file, for examplesudo /Applications/TextEdit.app/Contents/MacOS/TextEdit /System/Library/Extensions/NVDAResman.kext/Contents/Info.plistand insert the ID of your card into IOPCIPrimaryMatch key, for example0x06e410de 0x011010de&0xfff8ffff 0x017010de&0xfff8ffffAfter saving and closing the file, repair it's permissions
0x017910de 0x018010de&0xfff8ffff 0x018810de 0x018910de 0x020010de&0xfff8ffff
0x025010de&0xfff8ffff 0x028010de&0xfff8ffff 0x030010de&0xfff8ffff
0x031010de&0xfff8ffff 0x031910de 0x034910de 0x05e010de&0xfff8ffff
_linenums:0'><key>IOPCIPrimaryMatch</key> <string>0x06e410de 0x011010de&0xfff8ffff 0x017010de&0xfff8ffff0x017910de 0x018010de&0xfff8ffff 0x018810de 0x018910de 0x020010de&0xfff8ffff0x025010de&0xfff8ffff 0x028010de&0xfff8ffff 0x030010de&0xfff8ffff0x031010de&0xfff8ffff 0x031910de 0x034910de 0x05e010de&0xfff8ffff0x05f010de&0xfff0ffff</string>sudo chown 0:0 /System/Library/Extensions/NVDAResman.kext/Contents/Info.plist sudo chmod 755 /System/Library/Extensions/NVDAResman.kext/Contents/Info.plistRepeat the procedure for kext NVDANV40Hal or NVDANV50Hal, depending on your card's model, and run this command to have the kexts cache updatedsudo touch /System/Library/Extensions
I'm on 10.8.3 vanilla, my screen is stuck on 1280 x 1024 resolution and I get flicker and slow response when banner ads are loading or when mouse pointer hovers over the scroll bar...(CI or QE??)
I've tried to do this but my NVDAResman.kext and NVDANV40Hal.kext both don't have an info.plist file inside. I've tried using kexts from other computers which have the info.plist but the screen signal fails during boot-up.
I've used the EFI hex code in boot.plist and that got me some recognition in the system info utility app. but it did nothing for the graphics problem.
575]Asus GeForce GT 210:
575] Chipset Model: Asus GeForce GT 210
575] Type: GPU
575] Bus: PCIe
575] PCIe Lane Width: x16
575] VRAM (Total): 1024 MB
575] Vendor: NVIDIA (0x10de)
575] Device ID: 0x0a65
575] Revision ID: 0x00a2
575] ROM Revision: nVidia GeForce 210 OpenGL Engine [EFI]
65] Resolution: 1280 x 1024
65] Pixel Depth: 32-Bit Color (ARGB8888)
65] Main Display: Yes
65] Mirror: Off
65] Online: Yes
Could anyone assist me please?
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users