202 replies to this topic

[slipttees]

flock44 thx for support bro

thx

[slipttees]

first post UPDATED !

[iSynapse]

Hello....first of all i would like to thank you all for this guide driver and support...
Second i would like to ask you (anyone) if u can upload the #107 driver.

Thx in advance.

[slipttees]

first post updated add link to #0107 Bios.

[flock44]

was jus passing ur help to other who are in need dude...

Sorry for late reply Busy at work...

Cheers...

slipttees, on Mar 5 2009, 12:42 AM, said:

flock44 thx for support bro

thx

[suzihafuzi2]

slipttees, on Dec 15 2008, 09:42 PM, said:

Update 3/5/2009.1

Intel Board DG35EC Guide

First, we need to prepare the ground.

Get and update with last Bios there

PS: DON'T USE NEW BIOS VERSION #0112, DO YOU WILL LOST AHCI MODE! BUG IN BIOS !

USE  #0107 BIOS VERSION

Get DG35EC made me :-) there

OSX86Tools 1.0 Final: there Thx Jedi PCWiz

Chameleon 1.0.11 Installer: there Thx All Chameleon's

Bios Setting:

Main:
	Advanced:
			Peripheral Configuration:
					   Audio: Enable
							High Definition Front Panel Audio:  Enable
					   On-Board LAN: Enable
					   Onboard 1394: Enable
			Drive Configuration:
					   ATA/IDE Mode: Native
					   Configure SATA as: AHCI
					   Smart: Enable
					   Hard Disk Pre-Delay: No
			Floppy Configuration:
					   Diskette Controller: Disable
			Chipset Configuration:
					   PCI Latency Timer: 32
					   HPET: Enable
			USB Configuration:
					   Usb Ports: Enable
					   Usb Legacy: Enable
   Security:
			 XD: Enable
			 VT: Enable
   Power:
			 EIST: Enable
			 ACPI: S3 State
	Boot:
			 Boot Configuration: Advanced
				 Boot to removable device: Disable
				 Boot to Network: Disable
				 Usb Boot: Disable
				 Boot usb Device first: Disable
				 Usb Mass Storage Emulation Type: Auto

PS: Use HDD in the SATA0 Port and DVD in the SATA 1 Port

Start cd boot-132...

In darwin screen type Enter,

Typical boot device are 80 (First HD), 81 (Second HD) Enter two-digit hexadecimal boot Device [fe]

Replace the boot cd-132 at the retail dvd! Waiting 10 sec and press Enter, type f8 and type -v

Open Disktutil Create GUID Partition table and Install Mac OS X

Reboot System, Start cd boot-132 again...

In darwin screen type Enter,

Typical boot device are 80 (First HD), 81 (Second HD) Enter two-digit hexadecimal boot Device [fe]

type 80 and press Enter, type -v and Enter

Open boot-132 and mount kexts.img

in the kexts.img folder copy: Intel82566MM.kext, IntelCPUPMDisabler.kext, SMBIOSEnabler.kext, AppleDecrypt.kext to /System/Library/Extensions/

PS: ACPIPS2Nub.kext ApplePS2Controller.kext if you use keyboard and mouse PS2 :-)

after replacing the extensions open the terminal and use:

sudo -s 
chmod -R 755 /System/Library/Extensions/*
chown -R 755 /System/Library/Extensions/*
diskutil repairPermissions /
touch /System/Library/Extensions/*
exit
sudo -k
exit

Open OSX86Tools or chameleon installer and install "Chameleon EFI" in OS X Volume!

I tried Chameleon installer three times to work !

Reboot and Work Full speed Retail Now, 5 sec startup and 3sec halt   


Drivers update:

Intel 82566DC Ethernet Controller - There
Intel X3500 VGA Driver (Not Test There!) - There
ALC888S = There

Thanks f41qu3, a1kon, HotBreeze, and everyone Thanks.

Big Thx onemanstrash :-p

Sorry my pour English!  

[suzihafuzi2]

Hi , Maybe you can help me :
I have the exact configuration as yours :

MotherBoard : DG35EC
GFx            : MSI 8400GS
Ps2 KeyBorad
ps2 Mouse
Sata Cdrom (Sata 1)
120Gb WD HDD (Sata 0)

I Have The EXACT Same bios configuration. I Have Downgraded to #107 Bios Setting.
I have unplugged all devices from my computer (Even Tried unpluging the mouse)
i Use Retail Dvd and Your Boot132
But Still Get Acpi Error (Exactly like Corben2005 and pkdill - they said it is graphics problem but i have they exact same graphics like you)

i also tried other methods : iaktos, Ideneb, Ipc,leo4all
but they all say acpi error.

please i'm desperate...

[krzee]

me too!     
i get this EXACT same screen, and a freeze.
The last thing i see is:

Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components: use only one style.
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components: use only one style.

I have the EXACT same bios (107), EXACT same bios settings.  I have tried splittees' modified boot-132 with 10.5.0, 10.5.5, 10.5.6.  I have tried iDeneb 1.4.3 since the HCL says a DG35EC has been tested to work with it OOB.  I have tried ipc 10.5.6 since splittees reported it working before this thread.  Please help!!!   

Here is my specs:

intel DG35EC
intel q9400
sata seagate 1.5TB - sata port 0
sata LG dvd-rw       - sata port 1

I'm ok with the fact that video might not work, I figure if I get to that point I can either try the drivers from this post or just buy a known-to-work video card.  But that is not why we get this problem, others get this problem with external video cards as well.

I tested the hardware by installing winxp64bit and freebsd 8 on it, niether had any problems.

I have been trying to make this work for weeks =[

[krzee]

krzee, on Apr 19 2009, 06:05 PM, said:

The last thing i see is:

Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components: use only one style.
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components: use only one style.

I'm ok with the fact that video might not work, I figure if I get to that point I can either try the drivers from this post or just buy a known-to-work video card.  But that is not why we get this problem, others get this problem with external video cards as well.

Fixed!!!
Video was my problem.  I finally got a nVidia GeForce 9400 GT and my problems are over.
To anyone else geting the error I got, look into this!
It turns out where I was freezing is a common error, and not fatal.  I guess it was trying to init the video at that point...

[slipttees]

x3500 don't work, get other video card !

[Kenta]

I have the BIOS settings the same and everything, but I keep getting stuck here when I try to load the installer.
I'm using an 8600GT in the PCIe slot, so I don't see why I'm getting this problem (which is apparently related to video)

[iSynapse]

Did anyone noticed some kernel panics (caused by the ethernet card) after updating to 10.5.7?

When i turn on the pc...it gives me the panic...if i restart the pc it works well...only if the pc was off the the panics accour...

[troy12bayliss]

slipttees, on May 15 2009, 05:08 AM, said:

x3500 don't work, get other video card !

Hello. I want to try to make another boot132 cd only adding theStevoGMAX3500 to yours. How can I do?

[slipttees]

iSynapse, on May 18 2009, 10:01 AM, said:

Did anyone noticed some kernel panics (caused by the ethernet card) after updating to 10.5.7?

When i turn on the pc...it gives me the panic...if i restart the pc it works well...only if the pc was off the the panics accour...

if  you use chameleon, or other bootloader with smbios replacement support, better to make identify of your machine to be some imac or something else, MacPro4,1 identify may result in kernel panic, or you need to remove AppleTyMCEDriver.kext

font: netkas.org

[bobsort]

Hello and thanks for Tutorial.

the image attached to your post (first one) shows 10.5.3, any news for 10.5.6?

[amorrelle]

First - thanks for the great tutorial. I have the same board with a nvidia 7300gs and an intel e5300.

I can't get the ethernet kext to load at all. After I place the kext, fix permissions and touch the extensions folder I still have no ethernet showing up in system preferences.

I know the ethernet works because it worked in my windows install when I flashed the new bios. I cleared the extension cache but still no go...

Are there any known problems? A link to point me towards?

Sorry I am a newbie at this so thanks for any reply.

[amorrelle]

amorrelle, on Jun 25 2009, 07:38 AM, said:

First - thanks for the great tutorial. I have the same board with a nvidia 7300gs and an intel e5300.

I can't get the ethernet kext to load at all. After I place the kext, fix permissions and touch the extensions folder I still have no ethernet showing up in system preferences.

I know the ethernet works because it worked in my windows install when I flashed the new bios. I cleared the extension cache but still no go...

Are there any known problems? A link to point me towards?

Sorry I am a newbie at this so thanks for any reply.

Hate replying to my own question but I solved my problem. Here is a link to the post that worked for me.
Ethernet
Again thanks!

[slipttees]

first post updated.

[willymx70]

Hello. Can anyone tell me if the firewire port of this motherboard work ?

Thank you !

MWTB-DLTR.

[csbozoBrazil]

hi!!! I tried to boot the boot 132 cd and i have a problem with the following message:

"ISOLINUX 3.63 2008-04-10 ISOLINUX: IMAGE CHECKSUM ERROR, SORRY...

BOOT FAILED: PRESS ANY KEY TO RETRY"

What`s wrong?

Would you mind helping me, please?

Thx!!!