286 replies to this topic

[X-tra]

Hey guys, I  just got myself a brand new HP DV7-1090ed and have been playing with osx86 on it for the past few days, sound working would be great, but how do I find my device id when it's not displayed in System Profiler? It doesn't display anything there. I also tried to find with OSX86 tool, but that program won't work.

[Xtra]

sorry for the double post, but I installed both kexts, and now it displays that device id= 0x103C30F4, and that is 272380148
Is this correct?

[RaidenII]

age_sabres18, on Oct 22 2008, 03:15 PM, said:

You either have made a small mistake along the way or you need u need your ConfigData. Audio drivers from your ideneb install will not help you. if you want send me your audio info and i can patch it for you or check the one over that you already patched.

What should I send to you and how should i get it?
Moreover, my computer couldn't shutdown properly after these kexts installed.

[age_sabres18]

X-tra, on Oct 22 2008, 03:31 PM, said:

Hey guys, I  just got myself a brand new HP DV7-1090ed and have been playing with osx86 on it for the past few days, sound working would be great, but how do I find my device id when it's not displayed in System Profiler? It doesn't display anything there. I also tried to find with OSX86 tool, but that program won't work.

you need to get a linux codec dump for your audio codec.

RaidenII, on Oct 22 2008, 04:13 PM, said:

What should I send to you and how should i get it?
Moreover, my computer couldn't shutdown properly after these kexts installed.

send your  stuff to age_sabres18@hotmail.com and shutdown doesnt work because this kext is out of date compared to 10.5.5.

[RaidenII]

age_sabres18, on Oct 22 2008, 09:41 PM, said:

you need to get a linux codec dump for your audio codec.



send your  stuff to age_sabres18@hotmail.com and shutdown doesnt work because this kext is out of date compared to 10.5.5.

I mean, WHAT should I send and HOW could I get it.

[age_sabres18]

RaidenII, on Oct 22 2008, 10:17 PM, said:

I mean, WHAT should I send and HOW could I get it.

sorry uh just send your linux codec dump and your applehda.kext

[RaidenII]

age_sabres18, on Oct 22 2008, 11:16 PM, said:

sorry uh just send your linux codec dump and your applehda.kext

sent to ur mailbox. thx!

[Akiraosx]

Hi, i followed this guide step by step.I have your same device id = 0x111D76B2 and same Intel Audio Controller 0x293e8086.
I removed AppleAzalia.kext and ALCinject.kext.
I have installed modified ApplaHDA.kext as your guide, reset Extensions folder permission and reboot.
But when notebook restarted, no audio icon and non kext loaded.
but in System Profiler sound card is present!!!
Do you have any ideas to solve thi problem and make sound finally working?

Thank for your help

AkiraOsx

[Lnd_V]

I am having the same problem as Akiraosx.
any help would be greatly helpful thankyou.

[Durga Prasad]

Hi age_sabres18,

Thank you very much.. Sound is working (just because of your nice work).

My configuration:

HP pavilion dv5t-1000

my device id is 0x111D76B2. HDMI audio controller is Intel High Definition Codec - Ven8086, Dev 2802.

when I followed your instructions, system_profiler was showing my audio device, but there is no output sound device in system preferences.

In a trial&error method, I simply copied your 111D76B2IntelHDA.kext with your pinconfig in it (by download it from http://rapidshare.co...leHDA.kext.zip). Now, everything is working..

[RaidenII]

Durga Prasad, on Oct 24 2008, 02:39 AM, said:

Hi age_sabres18,

Thank you very much.. Sound is working (just because of your nice work).

My configuration:

HP pavilion dv5t-1000

my device id is 0x111D76B2. HDMI audio controller is Intel High Definition Codec - Ven8086, Dev 2802.

when I followed your instructions, system_profiler was showing my audio device, but there is no output sound device in system preferences.

In a trial&error method, I simply copied your 111D76B2IntelHDA.kext with your pinconfig in it (by download it from http://rapidshare.co...leHDA.kext.zip). Now, everything is working..

wait dude, you're using the same laptop as mine but why ur devid is 28028086?

[ridgeline]

Hey just touching base I have the same card as rnb5500 and I am not having very much luck either. I did notice in -v -f mode it looks as if the HDAenabler is loading twice. Is this normal could it be the problem I am having ? I now show 2 audio devices under the system profiler and still no sound. I tried Aeros and yours Sabres with minor modifications to both based on your how to guide and I am stumped at this pont I emailed you my codec dump could you please take a look at it. Great guide I am guessing it would have to be my pin config at this point. can you guide me on solving this.

Thanks, Mark

[Akiraosx]

RaidenII, on Oct 24 2008, 12:09 PM, said:

wait dude, you're using the same laptop as mine but why ur devid is 28028086?

My notebook is an HP DV5-1080el.
When osx boots with -v options, while loading HDAEnabler, speaker sounds a "scratch", but nothing else.

[RaidenII]

Akiraosx, on Oct 24 2008, 10:18 AM, said:

My notebook is an HP DV5-1080el.
When osx boots with -v options, while loading HDAEnabler, speaker sounds a "scratch", but nothing else.

I mean Durga Prasad because he said he is using dv5t-1000 which is the same as mine.

[DJ_MINIMI]

Doesn work for me...
i have hp dv5 1050

my id= 0x103C3603 decimal= 272381443 and hex i gess is 03363c10

can some one help me.

edited:RaidenII can you tell here do i get 9600m gt driver...
thanks

[Durga Prasad]

RaidenII, on Oct 24 2008, 12:09 PM, said:

wait dude, you're using the same laptop as mine but why ur devid is 28028086?

Hi RaidenII,

My codec device id is 0x111D76B2 (287143602 in decimal).

HDMI audio controller is Intel High Definition Codec - Ven8086, Dev 2802.

I don't know the reason why you have got a different HD audio controller. Did you try with age_sabre18's kext file?

One more thing is after I placed his kext file in /system/Library/Extensions, I deleted kext cache /System/Library/Extensions.mkext and rebooted.

[RaidenII]

Durga Prasad, on Oct 24 2008, 06:23 PM, said:

Hi RaidenII,

My codec device id is 0x111D76B2 (287143602 in decimal).

HDMI audio controller is Intel High Definition Codec - Ven8086, Dev 2802.

I don't know the reason why you have got a different HD audio controller. Did you try with age_sabre18's kext file?

One more thing is after I placed his kext file in /system/Library/Extensions, I deleted kext cache /System/Library/Extensions.mkext and rebooted.

could u post a screenshot from device manager properites page?

mine is here:

Attached Files

•  hdactrl.jpg   31.16K   333 downloads

[Durga Prasad]

RaidenII, on Oct 24 2008, 11:02 PM, said:

could u post a screenshot from device manager properites page?

mine is here:

I have posted screenshots of my IDT device id and HDMI audio controller.

Attached Files

•  HP_Pavilion_entertainment_dv5t_1000_Intel_HDMI.jpg   27.69K   274 downloads
•  HP_Pavilion_entertainment_dv5t_1000_IDT.jpg   27.56K   232 downloads

[RaidenII]

Weird, but now it's working. After deleted the extensions cache.

[Akiraosx]

GREAT!!! Now sound works!!!!
I restart the AppleHda.kext installation step by step, and I have found that hex id was only in one place, not both!!!
I reinstall the kext and now works!!!!

Thanks!!!!