zorz

My business machine updated automatic on 10.11.5 and all working perfect. Maybe Clover making problems (framebufer...)?! I have an Ozmosis in BIOS... P.S. However, try to change the cable.

Think it´a a cable problem. Try to change cable to monitor.

Just to add comment. I have the same situation now. On my bussiness machne i have R9 380 4GB and i onlu can boot with IGP enabled in BIOS and set as primary (bootable) vga adapter. No way to boot with r9 380 set as primary adapter. Freezes after little blink on apple logo In my GA mobo i have Ozmosis loaded...

In my cae: Reboot to Recovery HD and through Terminal type "csrutil disable; reboot". After rebooting copy modified AppleHDA.kext and HDAEnabler.kext (for me, that´s ALC892 version) into Lybrary/Extensions folder. With some Kext Utility do it a permissions repair and reboot again. Thats it. Apple HDA working fine for me. Forgot something. After all, reboot to Recovery HD and in Terminal type "csrutil enable; reboot" or if You use an XtraFinder type "csrutil enable --without debug; reboot". Enjoy! P.S. Till now i didn´t see Your mobo have ALC1150 so i haven´t kext for it.

The best way to arrange your proper and totally funcional ssdt/C&P states at all is to follow posted LINK. It´s for all newer osx. I solved my C&P states and now i have fully funcional 21 P-states from 0,8GHz-3,1GHz (switched off turbo in BIOS).

Help... Need vanilla AppleHDA.kext for 10.11.1 (i have been erased it )

I must have to return normal BIOS to my mobo because of Oz bootup problems with ElCapitan. Now i have a Clover with only one boot modd (USB fix) to recognise my USB ports (i have lost my own made DSDT and SSDT (erased HDD)) and that's all. I have no waitings when booting in comparison to Oz, so why not Clover as BL? With USB fix all work's like a charm and without any problems, but waiting for shorten Oz version for ElCapitan.

Again report from ElCapitan now working like a charm with Oz in BIOS. Strange usb flash preparation and Clover post install on EFI partition created by Oz. After that (installation) first reboot i have made from usb Clover and installed Clover on my EFI partition (EFI version of a Clover). After that i installed CustoMacEssentials.pkg/reboot then voodoohda.kext from MultyBeast package and reboot again. Form F12 boot meny i have choose UEFI partition of install HDD with Clover on it but with freez in moment and Kernel Panic error After that a have try to boot from elcapitan partition (that means fully function of Oz) and voila. Boot like a charm wthout any freezes and with my voodoohda.kext loaded but without any prelinkedkenel repairing or somethin else... For now, all working excellent!

After a couple of hours i must have return to Yosemite. After xx times of rebooting (testing) coclused that i have to install Clover or my systm wouldn´t boot properly. My Recovery HD partition was gone (it´s normaly for elcapitan) but i have no any chanse to access it to copy prelinkedkenel file and maybe that´s the reason why elcapitan wont boot properly every reboot. Also i have problem with sound. Once sound worked (second reboot) and no more. Why is that... i don´t know. Put it in /L/E of elcapitan and in Oz folders on EFI, always the same. No sound... To be continued...

Install successfuly passed!!! Only one way to success instalation was Clover EFI instalation on usb stick with ElCapitan. To be continued (breaked by my job)... Here i am again ElCapitan is significanly speeded than Yosemite and booting like a charm with built in Oz in BIOS. Here is the proof of installation.

Hmmh. Have a problem. When boot into -s mode and check my /dev/ folder, there no my usb listed!!! just recent hdd with all partitions and a bunch of a tty... What is happening with my usb stick and no listed in /dev/?

I have no Defaults.plist in Oz/Quo folder and in my BIOS only Oz v.894 can size (small BIOS chip). Now i tried to install OSX10.11 with Clover instaled on EFI partition of USB and all works perfectly... Canceled installation to prepare something steps if stuck Report come latter.

I´ll try with different USB and yes, it´s in USB2.0 port sticked. Report comeing later, and, yes, of course, if i replace BIOS then no more any loader P.S. Disabling USB3.0, XHCI or EHCI din´t get any result. Next move is t change USB drive...

Ok. For couple of minutes i´ll replace my BIOS with original and give it a try then report...

Just now tried to boot wit inserted "nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:csr-active-config=%67%00%00%00" without no success In my EFI/Quo folder i haven´t any .plist and i make it from Your suggestion, and then i have get an output from the picture but still no success. Where i am wrong (stopped at same point as all times before)?!?!?