Deffie Posted March 20, 2008 Share Posted March 20, 2008 Hi all, i have a P5K-SE Motherboard but i'm unable to go over "Got boot device = ..." BSD root: disk0s2, major 14, minor 2 Thank You! There is my configuration: Motherboard: P5K-SE Processor: E8400 Ram: 2/4gb (Tried both) DVD/HDD: both SATA, HDD on port 1 Bios settings: Sata configuration: Enhanced Configure SATA as IDE USB Configuration: USB Functions: Enabled USB 2.0 Controller: Enabled Bios EHCI Hand-Off: Disabled (tried both) Port 64/60: Disabled Legacy USB: Disabled (tried both) CPU Configuration: CPU Ratio Setting: AUTO C1E Support: Enabled Max CPUID Value Limit: Disabled Vanderpool Technology: Enabled CPU TM function: Enabled Execute disable bit: Enabled Intel SpeedStep: Disabled North Bridge Chipset Configuration: Memory Remap Feature: Disabled Initiate Graphic Adapter: PEG/PCI PEG Port Control: AUTO PEG Port Force x1: Disabled Onboard Device Configuration: High Definition Audio: Enabled Front Panel Type: AC97 Marvell IDE Controller: Disabled Onboard PCIE GbE LAN: Enabled LAN Option ROM: Disabled Serial Port 1 Address: Disabled Plug and play O/S: NO Power: Suspend Mode: S3 Only Report Video on S3 Resume: Disabled ACPI Version: Enabled ACPI Apic: Enabled APM: all Disabled Boot: Quick boot: Disabled Full Screen Logo: Disabled AddOn ROM Display Mode: Force BIOS Bootup Num-Lock: On Wait for F1 if Error: Enabled Hit DEL Message Display: Enabled Interrupt 19 Capture: Disabled. Link to comment Share on other sites More sharing options...
Jimmy Mallmann Posted March 20, 2008 Share Posted March 20, 2008 hi, hope it helps... full sata chanels... http://forum.insanelymac.com/index.php?sho...t=0#entry560371 Link to comment Share on other sites More sharing options...
Deffie Posted March 20, 2008 Author Share Posted March 20, 2008 hi, hope it helps... full sata chanels... http://forum.insanelymac.com/index.php?sho...t=0#entry560371 I really appreciate your guide; but my problem besides before patching; i'm not even able to boot from the DVD, it just hangs, it may be a bios setting problem, see my first post. Thank you, Giacomo. Link to comment Share on other sites More sharing options...
sg Posted March 20, 2008 Share Posted March 20, 2008 the issue is with your SATA driver, so you wont be able to boot off your DVD since its connected using SATA. you will have to find a pre-patched bootable DVD or boot from another device (USB). you can also find another hackintosh or mac and install a 10.5 system on your hackintosh's drive and then patch it from your mac or other hackintosh and then put it back in your p5k-se machine. thats really your only options. Link to comment Share on other sites More sharing options...
nour Posted March 21, 2008 Share Posted March 21, 2008 Hi in the bios gonfigure your SATA controler as AHCI not IDE. i hav th ASUS P5E3 mother board and all works fine with kalyway. pathc only audio. the Taruga patcher. (Realtek AL883). good luck Link to comment Share on other sites More sharing options...
Deffie Posted March 21, 2008 Author Share Posted March 21, 2008 Hi in the bios gonfigure your SATA controler as AHCI not IDE.i hav th ASUS P5E3 mother board and all works fine with kalyway. pathc only audio. the Taruga patcher. (Realtek AL883). good luck Hello, thank you for your interest in my problem; unfortunately Asus P5K-SE doesnt have AHCI option; it lets me configure ide as Compatible or Enhanced, and for the setting "Configure SATA as:" i have only IDE. Link to comment Share on other sites More sharing options...
Deffie Posted March 21, 2008 Author Share Posted March 21, 2008 the issue is with your SATA driver, so you wont be able to boot off your DVD since its connected using SATA. you will have to find a pre-patched bootable DVD or boot from another device (USB). you can also find another hackintosh or mac and install a 10.5 system on your hackintosh's drive and then patch it from your mac or other hackintosh and then put it back in your p5k-se machine. thats really your only options. I tried both modifying an hard disk with osx86 installed; deleting AppleVIAATA and installing DuNe's AppleIntelPIIX but it hangs as described before. I tried with an IDE DVD drive too, using integrated Marvell controller but no way, same problem; i would like to hear someone who is running OSX86 on a P5K-SE...because it is reported in the HCL but actually i know my case and another with the same problems. Cheers Link to comment Share on other sites More sharing options...
Deffie Posted March 23, 2008 Author Share Posted March 23, 2008 SOLVED Problem solved; my CPU was defective; compiz on linux was freezing the machine and prime95 on windows gave errors after few seconds of run.... P5K-SE works, just remove AppleVIAATA and use DuNe's AppleIntelPIIX Link to comment Share on other sites More sharing options...
Deffie Posted March 24, 2008 Author Share Posted March 24, 2008 Update: After running without AppleVIAATA and installing Leopard from SATA ich9 dvd i got on Leo and i wanted to see my PATA discs but putting back AppleVIAATA will result in using it for the ICH9 controller, plus it doesnt have Marvell ids; so i made these changes to it: I removed ICH9 SATA controller device id from AppleVIAATA.kext/Info.plist, which is: (lspci -n) 00:1f.5 0101: 8086:2926 (rev 02) 0x29268086 in Info.plist and i added Marvell device id: (lspci -n ) 02:00.0 0101: 11ab:6121 (rev b2) 0x612111ab in Info.plist Cheers! Link to comment Share on other sites More sharing options...
Patrick M Posted July 24, 2008 Share Posted July 24, 2008 SOLVED Problem solved; my CPU was defective; compiz on linux was freezing the machine and prime95 on windows gave errors after few seconds of run.... P5K-SE works, just remove AppleVIAATA and use DuNe's AppleIntelPIIX I am trying to get this working on a p5K-se with an IDE DVD player and SATA drive in slot 1, is this doable? I would rather not install 10.4 first and all that hassle, is it possible to directly install 10.5.1 using an IDE DVD and SATA HD? Patched DVD installers are fine. I would also consider buying an SATA DVD if I can install 10.5.1 directly. Link to comment Share on other sites More sharing options...
spiderkidtw Posted September 26, 2008 Share Posted September 26, 2008 Can you please tell me how to deleting AppleVIAATA and installing DuNe's AppleIntelPIIX ? Link to comment Share on other sites More sharing options...
Recommended Posts