crikfromcincy Posted February 20, 2008 Share Posted February 20, 2008 So I finally got Leopard to install using the best tutorial ever (from the wiki for Aitkos). My system is a prebuilt HP m9040n, and everything went smoothly, even found the ktext from searching the forums for my video card. Problem is... Ethernet and wifi aren't working, Pro Tools isn't seeing my mbox2, and I have no sound. This is just what I've noticed so far. Any ideas/pointers/suggestions? I'm dying to start recording again on my system, and since my q6600 system isn't really compatible with xp (tried finding drivers= massive fail)... I decided to try Leo. system specs (from belarc) Windows Vista Home Premium (build 6000) HP-Pavilion GN553AA-ABA m9040n System Serial Number: xxxxxxxx Enclosure Type: Desktop Processor a Main Circuit Board b 2.40 gigahertz Intel Core2 Quad Q6600 64 kilobyte primary memory cache 4096 kilobyte secondary memory cache Board: ASUSTeK Computer INC. Berkeley 1.xx Bus Clock: 267 megahertz BIOS: American Megatrends Inc. 5.07 08/08/2007 Drives Memory Modules c,d 827.93 Gigabytes Usable Hard Drive Capacity 665.81 Gigabytes Hard Drive Free Space HL-DT-ST DVDRRW GSA-H30L [CD-ROM drive] YH3726K ULS008X SCSI CdRom Device [CD-ROM drive] Generic- Compact Flash USB Device [Hard drive] -- drive 3 Generic- MS/MS-Pro USB Device [Hard drive] -- drive 6 Generic- SD/MMC USB Device [Hard drive] -- drive 5 Generic- SM/xD-Picture USB Device [Hard drive] -- drive 4 ST3320820AS [Hard drive] (320.07 GB) -- drive 0 ST3320820AS [Hard drive] (320.07 GB) -- drive 1, s/n 9QF6P26P, rev 3.CHL, SMART Status: Healthy WDC WD2500JD-00HBB0 [Hard drive] (250.06 GB) -- drive 2, s/n WD-WCAL71334891, rev 08.02D08, SMART Status: Healthy 3072 Megabytes Installed Memory Slot 'DIMM0' has 512 MB Slot 'DIMM1' has 1024 MB Slot 'DIMM2' has 512 MB Slot 'DIMM3' has 1024 MB Local Drive Volumes c: (NTFS on drive 0) 257.80 GB 207.08 GB free e: (NTFS on drive 1) 320.07 GB 233.62 GB free f: (NTFS on drive 2) 250.06 GB 225.11 GB free Network Drives None detected Users (mouse over user name for details) Printers local user accountslast logon xxxxxx 2/20/2008 9:54:33 PM (admin) xxxxxxx 8/14/2007 6:21:18 PM local system accounts xxxx 9/13/2007 1:58:59 AM (admin) xxxxx 2/5/2008 12:31:44 AM Marks a disabled account; Marks a locked account Adobe PDF Converter on Documents\*.pdf Microsoft XPS Document Writer on XPSPort: Send To Microsoft OneNote Driver on Send To Microsoft OneNote Port: Controllers Display Intel® ICH9 SATA AHCI Controller NVIDIA GeForce 8400 GS [Display adapter] Sceptre X9S-NAGA [Monitor] (19.1"vis, April 2003) Bus Adapters Multimedia Microsoft iSCSI Initiator SCSI/RAID Host Controller Intel® ICH9 Family USB Universal Host Controller - 2934 Intel® ICH9 Family USB Universal Host Controller - 2935 Intel® ICH9 Family USB Universal Host Controller - 2936 Intel® ICH9 Family USB Universal Host Controller - 2937 Intel® ICH9 Family USB Universal Host Controller - 2938 Intel® ICH9 Family USB Universal Host Controller - 2939 Intel® ICH9 Family USB2 Enhanced Host Controller - 293A Intel® ICH9 Family USB2 Enhanced Host Controller - 293C Digidesign Mbox 2 Audio Driver Digidesign Mbox 2 Midi Driver Hauppauge WinTV HVR-1800 (Model 78xxx, Combo ATSC/QAM) Realtek High Definition Audio Communications Other Devices PCI Soft Data Fax Modem with SmartCP Standard Modem Intel® 82566DC-2 Gigabit Network Connection primary Auto IP Address: xxx.xx.xxx.xx Gateway: xxxxxxxx Dhcp Server: xxxxxx Physical Address: xxxxxxxx \ Teredo Tunneling Pseudo-Interface USB Wireless 802.11 b/g Adaptor Dhcp Server: none responded Physical Address: xxxxxxxx Networking Dns Servers: xxxxxxx 65.24.7.11 AGERE OHCI Compliant IEEE 1394 Host Controller HID-compliant consumer control device (2x) HID-compliant device (6x) Microsoft eHome Infrared Transceiver USB Human Interface Device (3x) HID Keyboard Device Microsoft eHome MCIR 109 Keyboard Microsoft eHome MCIR Keyboard Microsoft eHome Remote Control Keyboard keys HID-compliant mouse (2x) Digidesign Mbox 2 Firmware Updater eHome Infrared Receiver (USBCIR) Generic USB Hub USB Composite Device (3x) USB Mass Storage Device USB Root Hub (8x) Compact Flash MS/MS-Pro SD/MMC SM/xD-Picture Please help as all I want to do is get this up and running, and record some of my music before I lose it. ANY help is greatly appreciated. When I boot into Mac, my mbox isn't seen by osx, and I can't get online with safari. Found a few ktext's but wasn't sure I have the intel/100v pro or whatever for the ktexts I have and didn't want to ruin anything. Thanks in advance for your help. Craig Link to comment https://www.insanelymac.com/forum/topic/88814-hp-m9040n-usb-ethernetwifi-and-audio-issues-please-help/ Share on other sites More sharing options...
crikfromcincy Posted March 5, 2008 Author Share Posted March 5, 2008 Nothing? Nobody? ....please? Link to comment https://www.insanelymac.com/forum/topic/88814-hp-m9040n-usb-ethernetwifi-and-audio-issues-please-help/#findComment-654836 Share on other sites More sharing options...
Stanford-Binet Posted March 5, 2008 Share Posted March 5, 2008 If you know the manufacturer and device ID (found in windows through the device manager in windows) then you can search for the appropriate fixes. There are a LOT of posts about your problem, you're going to have to do some work looking for the solution. Link to comment https://www.insanelymac.com/forum/topic/88814-hp-m9040n-usb-ethernetwifi-and-audio-issues-please-help/#findComment-655149 Share on other sites More sharing options...
kwjenkins Posted May 23, 2008 Share Posted May 23, 2008 hey there craig, I just bought a system just like yours and I am trying to get to the install part. I am having difficulty with the 2 installation disks I have to choose from and I thought I would inquire what you used- I can't get past a apple flashing before the system reboots. I am using kalway and have the leo4all install as well, but neither give me joy at this point. I have been trying to edit the bios to find acceptance of the dvd as start up, but I can't locate what I could change that could make the difference. I keep reading about ACPI settings, but theres no choice for that in the HP bios that I can see. the bios is 5.13 thanks for any pointers, Kenny Link to comment https://www.insanelymac.com/forum/topic/88814-hp-m9040n-usb-ethernetwifi-and-audio-issues-please-help/#findComment-756842 Share on other sites More sharing options...
Deja_Woo Posted May 24, 2008 Share Posted May 24, 2008 I have HP Elite m9060n model graphic card: Nvidia 8500GT (DVI and HDMI - out put) Sound Card: Realtek High Definition VID: 10ec PID 0888 <-- Partial working (use Patch 1.20 and Linux Codex Dump) (1) http://wiki.taruga.net/tiki-index.php (2) get http://forum.insanelymac.com/index.php?act...st&id=18636 <--- AppleHDA Patcher v1.20 (3) get Linux codec dump USB Wireless 802.11b/g (internal) VID: 15a9 , PID: 0004 <-- not working, Please Help me to make this work Vixs pure TV-U-48B0 (PCIx) VID: 1745 PID:2100 <-- not working Intel® 82566DC - Gigabit Network <-- NO kext or not support in Leopard I have to use one PCI slot to install PCI Linksys wireless -> model WMP54GS v1.1 ------------------------------------------------ Link to comment https://www.insanelymac.com/forum/topic/88814-hp-m9040n-usb-ethernetwifi-and-audio-issues-please-help/#findComment-756879 Share on other sites More sharing options...
Deja_Woo Posted May 24, 2008 Share Posted May 24, 2008 hey there craig, I just bought a system just like yours and I am trying to get to the install part. I am having difficulty with the 2 installation disks I have to choose from and I thought I would inquire what you used- I can't get past a apple flashing before the system reboots. I am using kalway and have the leo4all install as well, but neither give me joy at this point. I have been trying to edit the bios to find acceptance of the dvd as start up, but I can't locate what I could change that could make the difference. I keep reading about ACPI settings, but theres no choice for that in the HP bios that I can see. the bios is 5.13thanks for any pointers, Kenny Before you install MacOSX, please download and install EasyBCD1.7 in your windows Vista, then you can have dual boot Vista Home Premium + MacOSx Restart your computer, press F10 to edit BIOS, select Advanced Tab, look at SATA1 Controller [Enable] --> SATA1 Controller Mode (press Enter-Key) --> [iDE] (3 options - IDE, AHCI, RAID), then F10 to save Load Kayway10.5.2 into BR/HD-DVD Rom, restart your comp, hit Esc Key, then select boot from DVD Press F8, type -v .... .... .... Right click on 2nd harddrive which is HP_Pavilion --> select partition (at least 2) -> options MRB...... Note: YES - you can install MaxOSX on the same harddrive of your Vista Home Premium ( HP, Recovery) Link to comment https://www.insanelymac.com/forum/topic/88814-hp-m9040n-usb-ethernetwifi-and-audio-issues-please-help/#findComment-756972 Share on other sites More sharing options...
kwjenkins Posted May 24, 2008 Share Posted May 24, 2008 I already installed a GUID to the second drive and partitioned it for OS X but I can;t even get the computer to start up from OS X past flashing the startup apple on the install disk. I am using Kalyway 1.51 iso, and have the leopard4all3 as well, which isn't helping, grabbing the iATKO2 currently and will be trying that. I did put 4 gigs [2x2g] ram in, shows up fine in windows and the bios but maybe its stopping the dvd boot? I switched the ide controller in the bios like you said. is there any place to adjust the ACPI 2 settings that I am not seeing? Link to comment https://www.insanelymac.com/forum/topic/88814-hp-m9040n-usb-ethernetwifi-and-audio-issues-please-help/#findComment-757772 Share on other sites More sharing options...
igotjshoe Posted November 22, 2008 Share Posted November 22, 2008 So I finally got Leopard to install using the best tutorial ever (from the wiki for Aitkos). My system is a prebuilt HP m9040n, and everything went smoothly, even found the ktext from searching the forums for my video card. Problem is... Ethernet and wifi aren't working, Pro Tools isn't seeing my mbox2, and I have no sound. This is just what I've noticed so far. Any ideas/pointers/suggestions? I'm dying to start recording again on my system, and since my q6600 system isn't really compatible with xp (tried finding drivers= massive fail)... I decided to try Leo. system specs (from belarc) Windows Vista Home Premium (build 6000) HP-Pavilion GN553AA-ABA m9040n System Serial Number: xxxxxxxx Enclosure Type: Desktop Processor a Main Circuit Board b 2.40 gigahertz Intel Core2 Quad Q6600 64 kilobyte primary memory cache 4096 kilobyte secondary memory cache Board: ASUSTeK Computer INC. Berkeley 1.xx Bus Clock: 267 megahertz BIOS: American Megatrends Inc. 5.07 08/08/2007 Drives Memory Modules c,d 827.93 Gigabytes Usable Hard Drive Capacity 665.81 Gigabytes Hard Drive Free Space HL-DT-ST DVDRRW GSA-H30L [CD-ROM drive] YH3726K ULS008X SCSI CdRom Device [CD-ROM drive] Generic- Compact Flash USB Device [Hard drive] -- drive 3 Generic- MS/MS-Pro USB Device [Hard drive] -- drive 6 Generic- SD/MMC USB Device [Hard drive] -- drive 5 Generic- SM/xD-Picture USB Device [Hard drive] -- drive 4 ST3320820AS [Hard drive] (320.07 GB) -- drive 0 ST3320820AS [Hard drive] (320.07 GB) -- drive 1, s/n 9QF6P26P, rev 3.CHL, SMART Status: Healthy WDC WD2500JD-00HBB0 [Hard drive] (250.06 GB) -- drive 2, s/n WD-WCAL71334891, rev 08.02D08, SMART Status: Healthy 3072 Megabytes Installed Memory Slot 'DIMM0' has 512 MB Slot 'DIMM1' has 1024 MB Slot 'DIMM2' has 512 MB Slot 'DIMM3' has 1024 MB Local Drive Volumes c: (NTFS on drive 0) 257.80 GB 207.08 GB free e: (NTFS on drive 1) 320.07 GB 233.62 GB free f: (NTFS on drive 2) 250.06 GB 225.11 GB free Network Drives None detected Users (mouse over user name for details) Printers local user accountslast logon xxxxxx 2/20/2008 9:54:33 PM (admin) xxxxxxx 8/14/2007 6:21:18 PM local system accounts xxxx 9/13/2007 1:58:59 AM (admin) xxxxx 2/5/2008 12:31:44 AM Marks a disabled account; Marks a locked account Adobe PDF Converter on Documents\*.pdf Microsoft XPS Document Writer on XPSPort: Send To Microsoft OneNote Driver on Send To Microsoft OneNote Port: Controllers Display Intel® ICH9 SATA AHCI Controller NVIDIA GeForce 8400 GS [Display adapter] Sceptre X9S-NAGA [Monitor] (19.1"vis, April 2003) Bus Adapters Multimedia Microsoft iSCSI Initiator SCSI/RAID Host Controller Intel® ICH9 Family USB Universal Host Controller - 2934 Intel® ICH9 Family USB Universal Host Controller - 2935 Intel® ICH9 Family USB Universal Host Controller - 2936 Intel® ICH9 Family USB Universal Host Controller - 2937 Intel® ICH9 Family USB Universal Host Controller - 2938 Intel® ICH9 Family USB Universal Host Controller - 2939 Intel® ICH9 Family USB2 Enhanced Host Controller - 293A Intel® ICH9 Family USB2 Enhanced Host Controller - 293C Digidesign Mbox 2 Audio Driver Digidesign Mbox 2 Midi Driver Hauppauge WinTV HVR-1800 (Model 78xxx, Combo ATSC/QAM) Realtek High Definition Audio Communications Other Devices PCI Soft Data Fax Modem with SmartCP Standard Modem Intel® 82566DC-2 Gigabit Network Connection primary Auto IP Address: xxx.xx.xxx.xx Gateway: xxxxxxxx Dhcp Server: xxxxxx Physical Address: xxxxxxxx \ Teredo Tunneling Pseudo-Interface USB Wireless 802.11 b/g Adaptor Dhcp Server: none responded Physical Address: xxxxxxxx Networking Dns Servers: xxxxxxx 65.24.7.11 AGERE OHCI Compliant IEEE 1394 Host Controller HID-compliant consumer control device (2x) HID-compliant device (6x) Microsoft eHome Infrared Transceiver USB Human Interface Device (3x) HID Keyboard Device Microsoft eHome MCIR 109 Keyboard Microsoft eHome MCIR Keyboard Microsoft eHome Remote Control Keyboard keys HID-compliant mouse (2x) Digidesign Mbox 2 Firmware Updater eHome Infrared Receiver (USBCIR) Generic USB Hub USB Composite Device (3x) USB Mass Storage Device USB Root Hub (8x) Compact Flash MS/MS-Pro SD/MMC SM/xD-Picture Please help as all I want to do is get this up and running, and record some of my music before I lose it. ANY help is greatly appreciated. When I boot into Mac, my mbox isn't seen by osx, and I can't get online with safari. Found a few ktext's but wasn't sure I have the intel/100v pro or whatever for the ktexts I have and didn't want to ruin anything. Thanks in advance for your help. Craig do u need help still i have mine working great so if any fo yall need help jus holla at me Link to comment https://www.insanelymac.com/forum/topic/88814-hp-m9040n-usb-ethernetwifi-and-audio-issues-please-help/#findComment-974498 Share on other sites More sharing options...
Swiyzee Posted September 21, 2009 Share Posted September 21, 2009 Anyone got this system working 100% yet? im still at 10.5.6 and im getting anxious to use the ethernet, wireless and with 15-in-1 card reader. Link to comment https://www.insanelymac.com/forum/topic/88814-hp-m9040n-usb-ethernetwifi-and-audio-issues-please-help/#findComment-1274719 Share on other sites More sharing options...
kwjenkins Posted September 21, 2009 Share Posted September 21, 2009 I got it working up to 10.5.7 so far, the ethernet and wifi I replaced with new hardware, or just didn't use [ethernet] the card reader always worked/ try searching on my name for posts from last year around aug-sept. Good luck! kenny Link to comment https://www.insanelymac.com/forum/topic/88814-hp-m9040n-usb-ethernetwifi-and-audio-issues-please-help/#findComment-1275120 Share on other sites More sharing options...
Recommended Posts