Jump to content
3411 posts in this topic

Recommended Posts

Does the driver still get KP? If not, someone could give VNC access to j. I can't, I dont have the card either.

 

There are no KPs yet. I ve done a few scans and a few attempts to attach. I could not figure from the logs what networks it found and what the numbers are associated with those networks. But I randomly tried to attach to 1, 2, 3, 4 .. did not know what to expect after I tried to attach to network (option 3 in network selector). I believe someone already offered this, but I can definitely give VNC access to J.

to finish the driver i'll have to test code related with ieee80211_authenticate and outputpacket

this code gives kernel panics - no way to use vnc to connect to another computer

 

try this - fix for scan reinit

 

iwi3945 rel 1169

iwi4965 rel 1170

iwi3945 rel 1169

 

first reboot --> hangs on blue screen (I guess, the screen was blue for 5 minutes then I did a hard reset)

second time booted with -v --> no freezes

 

then I did a scan --> did found my wireless AP with mac adress

 

Jun 8 23:33:28 thomas-godons-mac-pro kernel[0]: 1) 00:13:f7:35:a9:e2 ('Boven') cap 421 hw 3 ch 6\

 

Then I tried to connect to unsecured network

system.log.txt

Sorry for the lame question, I'm new in the hole OSX86… I have dell e1505 with 3495ABG. I tried to install the driver but even after the REBOOT I haven't any new network driver and the network selector doesn't even let me the selection menu.

I'm using kalyway 10.5.2.

Can some help me and tell me what am I'm doing wrong?

10x

 

It's a new installion. I installed the Kalyway and than the driver? do I need to install something else first?

OK, iwi4965 rev 1170 logs, no KP this time, everything boots and runs fine. Kernel doesnt recognize new ethernet device, but iwi4965 starts scanning and does recognize my network, the only one in range. It will not let me connect, i dont think, i have no way of telling, This is only a small section of the logs. The whole thing is 10+ MB. It seems to be stuck in an infinite loop scanning, so the logs just repeating. Cut it down for size issues. Thanks for the great work J. Look forward to next rev.

iwi4965_rev_1170_logs.txt

Hello! I tested the iwi3945 rel 1169 and it gives some result! It scans and shows up my network. After this i don't know, what should be doing.

 

Here is my Logfile:

 

Javi, i have some free time for this, so if i can help, just write it here what i have to do!

 

Sandiel

syslog.txt

First, logs from 4965 r1170. Second, logs i did yesterday with r1160 which show really odd activity.. i'm still seeing this sometimes, looking for info so i can work out a fix and contribute.

 

I'm still getting the issue with networkSelector not seeing the card, but i don't have the osx experience to properly troubleshoot it myself.

 

I do have some Unix/linux ability, and can code a bit.. please direct me jalavoui :D

Kodama1170_20080609.zip

Kodama1160_20080608_01.zip

OK, i'm at the same step as before, only now the kernel is recognizing the interface. For some reason it is trying to assign it the same address (i.e. en1) as the wired adapter. How can I change it, i know that it is finding it because in my current logs it gives me the

Jun  8 20:55:06 Jesses-Hackintosh kernel[0]: check_firstup
Jun  8 20:55:06 Jesses-Hackintosh kernel[0]: goto system preferences -> networks and press apply if you keep seeing this

deal, so it is detected. But I cannot for the life of me figure out how to change the address in 10.5.2. The wired adapter is en0, i need to set iwi4965 to en1 somehow. What do I need to do?

[rant] And btw cheeseboy, shut your mouth. If you want the driver to progress faster maybe consider HMMM I DONT KNOW, HELPING!! Seriously at least post a log, a KP pic, anything to help J out, he's been workin on this for almost 2 years and has gotten nothing from it. I mean honestly I understand wanting it to be done, I want it finished to, but I try to help. [/end rant]

My Log.

i have reinstalled Leopard to give you an hand guys.

 

Jun 9 12:34:38 massy-massys-mac-pro kernel[0]: 1) 02:05:b4:04:d1:68 ('Rete wireless Massy') cap 431 hw 3 ch 6 WOW he find the only network around :)

i try to connect disabling the Protectio. i will post a log soon.

system.txt.zip

Guest
This topic is now closed to further replies.
×
×
  • Create New...