podarok Posted January 1, 2008 Share Posted January 1, 2008 After succesfull installation into my SA2053T Notebook I have strange problem On "Do You Already Own a Mac"(after video demo) Window I have to select "Do not transfer my information now" but after it window didn`t out any activity, only busy mouse cursor Any help will be nice for me The same trouble with - vanilla kernel, - installed sse2 patch, - tohkernel 9.1.0, - full extensions from Kalyway DVD 9.1.0 How to skip that window? May be some boot parameters? Disabled kexts? May be there is some functionality for transfer my user profile from another leo installed system, but not via fireware or another volume or time machine? There is a real problem for me ((( Link to comment Share on other sites More sharing options...
gazasaurusu Posted January 4, 2008 Share Posted January 4, 2008 I have the same problem. On that screen it hangs for a while then goes back to the start of registration. There must be a way to skip registration. Link to comment Share on other sites More sharing options...
ZoomZom Posted January 6, 2008 Share Posted January 6, 2008 when darwin is booting, boot in single mode type this > -s enter in a single mode > /sbin/fsck -fy this need if you reset your comp on registration steps > /sbin/mount -uw / mountig all devices > /passwd root to make the root password > touch /var/db/.AppleSetupDone finishing registration assistant > reboot Link to comment Share on other sites More sharing options...
megaman81 Posted February 12, 2008 Share Posted February 12, 2008 Mine doesnt even boot with kalaway dvd! it goes through the process of loading drivers and it crashes and asks me to restart installation? i have same laptop as the OP. Link to comment Share on other sites More sharing options...
DiamondKigma Posted February 12, 2008 Share Posted February 12, 2008 Me too have same problem , but thanks the info-s !! check it! hope will work. I stocked in this point about one week ago. Link to comment Share on other sites More sharing options...
geez Posted February 12, 2008 Share Posted February 12, 2008 Had this problem too. Turned out to be something to do with my (unsupported OTB) network card. The instructions ZoomZom provides were an effective workaround for me. Good luck! Link to comment Share on other sites More sharing options...
smorf Posted February 12, 2008 Share Posted February 12, 2008 i fixed this by plugging off my ethernet plug during first boot. i chose the "this machine does not connect to the internet" and i skipped the registration then. Link to comment Share on other sites More sharing options...
DiamondKigma Posted February 14, 2008 Share Posted February 14, 2008 I tried your tips but dont work for me , when i runned the terminal in -s that is the last lines after terminal loaded, Singleuser boot - - fsck not done Boot device is mounted read only If you want to make modifications to files /sbin/fsck -fy -sbin/mount -uw -/ and i type your first and second line without any problem , but when i type the following line : /passwd root (i tried many wariations , example : /passwd only or /root passwd) , and allways got error message , dont possible command or something like , if you can plz help me , in my problem . thanks! my config: Asrock 4Core Dual P4 HT 3Ghz (HT functions setted disabled in bios) 2GB RAM 1x1GB667Mhz and 1x1GB800Mhz run in dual channel 160GB seagate PATA Philips DVD only reader PATA (drives in same cable, in IDE1 , winchester master , dvd slave ) GeForce 8600GT Link to comment Share on other sites More sharing options...
podarok Posted February 15, 2008 Author Share Posted February 15, 2008 the problem was in IONetworkingFamily.kext using how-to from my sig I kill it and finished install without problems After that I get the kext from Tiger and all work fine Link to comment Share on other sites More sharing options...
Abhavni Posted July 16, 2008 Share Posted July 16, 2008 Hi There! I have been trying to get a dual boot set up Win XP and Mac OS on my SA2053T. I would really appreciate if you could guide me in getting that set up. Also, I dont have the Mac OSx86 DVD with me. Could you tell me how I can get hold of it. I just wanna try Mac and if I like it I will buy the OS, but for the meanwhile I wanted to try it along side Win XP and see how it goes. My email address is abhavni@yahoo.com. Thanks in Advance, Abhavni After succesfull installation into my SA2053T Notebook I have strange problemOn "Do You Already Own a Mac"(after video demo) Window I have to select "Do not transfer my information now" but after it window didn`t out any activity, only busy mouse cursor Any help will be nice for me The same trouble with - vanilla kernel, - installed sse2 patch, - tohkernel 9.1.0, - full extensions from Kalyway DVD 9.1.0 How to skip that window? May be some boot parameters? Disabled kexts? May be there is some functionality for transfer my user profile from another leo installed system, but not via fireware or another volume or time machine? There is a real problem for me ((( Link to comment Share on other sites More sharing options...
MondayRiot Posted September 7, 2008 Share Posted September 7, 2008 when darwin is booting, boot in single mode type this > -s enter in a single mode > /sbin/fsck -fy this need if you reset your comp on registration steps > /sbin/mount -uw / mountig all devices > /passwd root to make the root password > touch /var/db/.AppleSetupDone finishing registration assistant > reboot but then when it boots it will ask for a username and everything i have tried will not work !! :'( Link to comment Share on other sites More sharing options...
fresher83 Posted January 6, 2009 Share Posted January 6, 2009 thanks for this guid. > -s enter in a single mode > /sbin/fsck -fy this need if you reset your comp on registration steps > /sbin/mount -uw / mountig all devices > passwd the type your root password > touch /var/db/.AppleSetupDone finishing registration assistant > reboot had the same problem, but solved it now. @MondayRiot: Maybe to late your username is: root an your password, is that one you type in the console. after that you can add a new user in SystemPreferences-Accounts Link to comment Share on other sites More sharing options...
Recommended Posts