Jump to content

OSX86 runs on Intel P35 chipset !


AivarAnnamaa
 Share

43 posts in this topic

Recommended Posts

There was several people wondering if Hackintosh runs on new intel P35 chipset. I can confirm that it does.

I just installed JaS 10.4.8 SSE2 & SSE3 (AMD, Intel) on Gigabyte GA-P35-DS3R successfully (kind of).

 

Had some problems with SATA HDD (wanted to make Vista-Mac dual boot and provided a partition for MacOs but MacOs installer saw only my Vista partition)

 

So i installed it on a PATA drive. It boots only when i select this drive as boot drive - installer didn't modify MBR on my main drive (SATA)

 

Ethernet (Realtek RTL 8168/8111) wasn't working at first but RTL1xxx_1.02.pkg installer worked it out!

 

USB seems working fine. PCI Firewire card also.

 

I included NVidia drivers from JaS install -- they seem to work fine (on a Gigabyte GeForce 7100 GS)

 

Samsung SATA DVD drive seems working fine (havent tried burning yet).

 

My processor is Core2Duo 4300 (clocked to 3GHz)

 

 

 

Only problem left is audo -- on board Realtek ALC889A -- no audio hardware is deteted. AzaliaAudio.pkg didn't help. Hope someone can give me some hints what to try next!

 

best greetings!

 

Aivar

Link to comment
Share on other sites

  • 3 weeks later...

Installed OS X 10.4.8 Jas on my GA-P35-DSR3. Everything works except Audio. I had to install ethernet driver from Realtek website. I am using Creative Live USB external for Audio.

 

 

MotherBoard : GA-P35-DS3R

CPU : E4300 running @ 2.4 GHz

Memory : 2 * 1GB

Display Card : XfX 7600GS - Working fine

Ethernet : Realtek RTL 8168/8111 - Working after installing driver from RealTek

Audio : ALC889A - Not working

Hard Drive : SATA Drive Connected to ICH9 in AHCI Mode

DVD-RW : Samsung SATA 183L Connected to gigabyte SATA

Link to comment
Share on other sites

Installed OS X 10.4.8 Jas on my GA-P35-DSR3. Everything works except Audio. I had to install ethernet driver from Realtek website. I am using Creative Live USB external for Audio.

MotherBoard : GA-P35-DS3R

CPU : E4300 running @ 2.4 GHz

Memory : 2 * 1GB

Display Card : XfX 7600GS - Working fine

Ethernet : Realtek RTL 8168/8111 - Working after installing driver from RealTek

Audio : ALC889A - Not working

Hard Drive : SATA Drive Connected to ICH9 in AHCI Mode

DVD-RW : Samsung SATA 183L Connected to gigabyte SATA

Hi! thks 4 info!, I've installed the uphuck 1.3 and ICH9 SATA isn't working. I'll try the JAS release!, it's recognized as ICH9 AHCI or is a generic driver?.

 

Thanks in advance

Link to comment
Share on other sites

muhahahah, my p5k-e is fully working

Asus ftw

 

Even the sleep mode ? SATA ? Sound ?

If it's really fully working, it's great news.

 

Has anyone tryed osx86 on a P5K Deluxe WiFi AP ??

If it works with a P5K-E, it should work on this one too

Link to comment
Share on other sites

  • 3 weeks later...
muhahahah, my p5k-e is fully working

 

Asus ftw

 

Even the sleep mode ? SATA ? Sound ?

If it's really fully working, it's great news.

 

Has anyone tryed osx86 on a P5K Deluxe WiFi AP ??

If it works with a P5K-E, it should work on this one too

 

I'm curious too

Link to comment
Share on other sites

Funny cause I have an Asus p5k Deluxe and the sound doesn't work. I think someone's not telling the truth.

 

I also have a Gigabyte P35 DS3P and just about everything works, including both GPU slots, fully working (QE, CI, etc). Now if I only had two of the same GPU's =P

Link to comment
Share on other sites

Funny cause I have an Asus p5k Deluxe and the sound doesn't work. I think someone's not telling the truth.

 

I also have a Gigabyte P35 DS3P and just about everything works, including both GPU slots, fully working (QE, CI, etc). Now if I only had two of the same GPU's =P

 

Are you using uphuck or Jas? What type of Video card do you have? I have a 8600GT right now.

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Hi , I have problem to boot after i install 10.4.9 into a sata HD.

 

My hardwares are Gigabyte P35-DS3P, Seagate 500GB SATA2, 2GB Memory, Intel core Due

 

Do you mean you install mac into a IDE HD? Is this the only way to install?

Link to comment
Share on other sites

WOOOOOOOOOOOOOOOOOW ! CHAMPAGNE !!

I couldn't wait any longer... THANK YOU FOR SHARING THIS !!

Damn I'm so happy...

 

 

ahhh ahahaha!!! man i know exactly how u feel!!!!! and i already have the piece!!!! just been wondering which version (JaS or uphuck) should i go for.

 

w000t only if i can somehow find out how to obtain all these patches....mmmmmmmmmm >;]

Link to comment
Share on other sites

ahhh ahahaha!!! man i know exactly how u feel!!!!! and i already have the piece!!!! just been wondering which version (JaS or uphuck) should i go for.

 

w000t only if i can somehow find out how to obtain all these patches....mmmmmmmmmm >;]

 

I guess you should go for uphuck 1.4i r3 !!

 

Keep us in touch, but it should run flawless, except sound...

Link to comment
Share on other sites

There was several people wondering if Hackintosh runs on new intel P35 chipset. I can confirm that it does.I just installed JaS 10.4.8 SSE2 & SSE3 (AMD, Intel) on Gigabyte GA-P35-DS3R successfully (kind of).Had some problems with SATA HDD (wanted to make Vista-Mac dual boot and provided a partition for MacOs but MacOs installer saw only my Vista partition)So i installed it on a PATA drive. It boots only when i select this drive as boot drive - installer didn't modify MBR on my main drive (SATA)Ethernet (Realtek RTL 8168/8111) wasn't working at first but RTL1xxx_1.02.pkg installer worked it out!USB seems working fine. PCI Firewire card also.I included NVidia drivers from JaS install -- they seem to work fine (on a Gigabyte GeForce 7100 GS)Samsung SATA DVD drive seems working fine (havent tried burning yet). My processor is Core2Duo 4300 (clocked to 3GHz)Only problem left is audo -- on board Realtek ALC889A -- no audio hardware is deteted. AzaliaAudio.pkg didn't help. Hope someone can give me some hints what to try next!best greetings!Aivar
heyi have a gigabyte P35-DQ6 motherboard this board uses a ALC889A chipset for audio.i got two channel audio working - no sound input.i used the appleazaliaaudio install, modified the <key>IOHDAudioCodecVendorID</key> to 0x10ecffff and turned on the azalia option in BIOS.i have posted a copy of my kext - you semm to me like you know your way around the system if you got the other devices working. so i wont give detailed instructions. but let me know if you need more helpPete.

AppleAzaliaAudio.kext.zip

Link to comment
Share on other sites

heyi have a gigabyte P35-DQ6 motherboard this board uses a ALC889A chipset for audio.i got two channel audio working - no sound input.i used the appleazaliaaudio install, modified the <key>IOHDAudioCodecVendorID</key> to 0x10ecffff and turned on the azalia option in BIOS.i have posted a copy of my kext - you semm to me like you know your way around the system if you got the other devices working. so i wont give detailed instructions. but let me know if you need more helpPete.

 

 

Hey!

 

Thanks for Posting your information.

It would be nice if you can give me a little HowTo for get my ALC889a an my P35-DS3 working.

I cant find the AppleAzaliaAudio installer....

 

THX

 

Edit: Yust Screamed "Help" too fast :(

It works! Got Sound on my GA-P35-DS3 working!

Installed AzaliaAudio.pkg

replaced the AppleAzaliaAudio.kext with you version.

Repaired Permissions

rebootet

WORKS!!!!!!!!!

 

Thank you so much!

 

All i need now is working Driver for my 8600 GTS :angel: (I know that it not work yet.... waiting......)

Link to comment
Share on other sites

Hi,

 

I have a P35-DQ6 and i have problems with my hard disk benchs in x-bench, what driver or patch i need in order to have the HD fully working???

i have the uphuck 1.4i ... where is this option??

 

sorry for my noobnes

Link to comment
Share on other sites

I recently purchased a Gigabyte P35 DS3R and I can no longer get uphuck to install on my system. Disk Utility detects my my 200GB SATA as 128GB when plugged in a sata port, but when I switch the hard drive cable to a purple port it correctly detects the HD as 200gb. Either way, after install I get the same error...

 

System config file '/com.apple.Boot.plist not found

 

I know its not the disc, because I have successfully used it many times on my MSI975x board. I set the bios so the HD with OSX boots first. Any help would be greatly appreciated!

 

(System Specs)

install disc: uphuck 10.4.9 r2

processor: Core2duo e6700

Motherboard: Gigabyte P35 DS3R

HD: Seagate Barracuda 7200.7

VGA: ATi x1900xtx

Link to comment
Share on other sites

I recently purchased a Gigabyte P35 DS3R and I can no longer get uphuck to install on my system. Disk Utility detects my my 200GB SATA as 128GB when plugged in a sata port, but when I switch the hard drive cable to a purple port it correctly detects the HD as 200gb. Either way, after install I get the same error...

 

System config file '/com.apple.Boot.plist not found

 

I know its not the disc, because I have successfully used it many times on my MSI975x board. I set the bios so the HD with OSX boots first. Any help would be greatly appreciated!

 

(System Specs)

install disc: uphuck 10.4.9 r2

processor: Core2duo e6700

Motherboard: Gigabyte P35 DS3R

HD: Seagate Barracuda 7200.7

VGA: ATi x1900xtx

 

I used Jas 10.4.8 on my P35 DS3. I have my 320GB Sata Drive and my DVD-RW connectet to the orange Ports. In Bios AHCI is ON and Lagcy mode is OFF. It works with no problems....

Link to comment
Share on other sites

 Share

×
×
  • Create New...