Welcome to InsanelyMac.com - No more ads! And some exciting news... Read more...
×
-
Similar Content
-
By skrypious
Hi,
I have been using my hackintosh for a while without any problems, until my monitor is replaced with a new one... Previously I was using 2 monitors connected via HDMI + DVI, now - with new one, I am using HDMI + DP, and my hackintosh stopped working. On every boot, everything I see is black screen... When I connect only one monitor (via HDMI or DP) - everything works fine.
I have tried many things:
- CSM off / on
- PEG + iGPU (64MB/128MB) / only PEG
- SSDT patching / DeviceProperties patch
- VBIOS reflash
- BIOS reflash
- Changing cables
- Resetting NVRAM
- Changing SMBIOS
Nothing helps…
Fun fact - for 2 days everything was ok, the black screen problem appeared suddenly... So I am writing this post, maybe someone more knowledgeable will be able to help me
Hardware:
- Intel Core i5 4690k 3,5GHz (overclocked to 4,4GHz)
- MSI Z97 Gaming 3
- MSI Radeon R9 390 8GB
- Kingston 16GB DDR3
Software:
- macOS Big Sur
- Dual boot with Windows 10
Screens:
- Acer VG272U [email protected] (connected via DP 1.4)
- LG 23MP48 [email protected] (connected via HDMI 2.0)
Hackintosh:
- OpenCore 0.6.3
- iMac15,1
- Full EFI: https://drive.google.com/file/d/1eul7SnOEunfJOxBGD3Ygcmkc9f80DrlN/view?usp=sharing
BIOS:
- UEFI Boot Mode
- CFG Lock and VT-D are disabled
- iGPU is disabled right now, but it doesn't make any difference somehow in this situation. iGPU is HD4600
More Info:
- I have SSDT patch in my ACPI folder, which works fine - R9 390 works pretty fast, but I have never edited AMD8000Controller - is it required?
- I also have all needed kexts (AppleALC, AetherosE2200Ethernet, Lilu, VirtualSMC, WhateverGreen)
- if I made linguistic mistakes somewhere - forgive me, I don't use English every day
-
By Jack_Limesicle2020
I just got a new macbook from my company - its acting as a stand alone and not connected to the servers, however as Filefault is now activated upon set up by default, i am unsure if my company had set up a file vault master keychain or something before i did my macbook setup. In the System preferences > FileVault it just says "A recovery key has been set" as apposed to "A recovery key has been set by your company, school or institution" like I have seem screen shots of online when institutions can do this. How do I know if my company has done something - would it just say in FileVault?
Thank you any insight would be great!
-
By goldrag423
Hey everybody, I decided to try to make a Hackintosh because I had some mac programs from when I switched to Windows. I'm trying to do it vanilla but this is my first time. After some trial and error and Google I've gotten to where the Apple logo and the progress bar shows but then it freezes and all power is cut to all of the usb ports. I've attached what it looks like with the verbose flag and here's the link to my CLOVER folder:
https://drive.google.com/drive/folders/1FDc_qLOVET64OWi9YzwDopsM1i-7nGS2?usp=sharing
And here are my specs:
Motherboard: Gigabyte b75m-d3h
CPU: Intel i5 3570 (Ivy Bridge)
GPU: Nvidia GTX 1660 (I've disabled it in my config.plist)
-
By Crunch3D
Hi guys,
Im working myself trough this guide: https://github.com/daliansky/XiaoMi-Pro-Hackintosh
Worked quite good so far. Mac OS is running.
Internal Wifi is working and i patched the bios for better graphics and undervolting later.
However i cant seem to get NVMEFix.kext running with OpenCore 0.6.3
I put the kext into the kext Folder and when i add it to my config.plist the Laptop kenel panics on the apple logo.
So do i something wrong in the config or is it just broken ?
Could someone who has that running post his plist ?
I have a Samasung 970 Evo in the Laptop and i heard from multiple sources that card would need the fix for better performance.
My plist: https://pastebin.com/7jg624tu
What i add the get NVEM running (after all the other kext in der Kernel section): <dict> <key>Arch</key> <string>x86\_64</string> <key>BundlePath</key> <string>NVMeFix.kext</string> <key>Comment</key> <string>NVME\_Fix</string> <key>Enabled</key> <true/> <key>ExecutablePath</key> <string></string> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string>16.0.0</string> <key>PlistPath</key> <string>Contents/Info.plist</string> </dict>
Thanks for the help!
PS: I wanted to post this in the NVMEFix Section but the forum won't let me so hoping the devs there will see this :-)
Thanks for your great help!
Manuel
-
By Nyssa6
Hey all,
I have recently purchased a fenvi t919 wifi card. I really wanted aidrop and the rest of the features.
I have noticed that the websites load significantly slower, so i did a quick speedtest. The speed is just
HORRIBLE. With a cheap wifi dongle, my speed was around 70-78 Mbps, with the Fenvi card
it's around 10Mbps. My internet is around 200Mbps. My macbook pro from the same spot does 190Mbps.
Can anybody tell me why my speed is so horrible?
Mobo: Gigabyte Z370 HD3
Catalina Mac Os.
I attached my speedtest results for comparison.
-