checkout our official site! https://twortech.wixsite.com/pcmac
This build is compatible up to Big Sur Beta
Now Compatible with macOS 11
Please leave feedback with issues or w/o
Comitted to Updating up to OS 11
Latest Release Notes
Fixed Bluetooth and Wifi Stability Issues
Improved Preformance and Power Managements
Can Provide Files for Display Overrides
Additional Patches for 4K Display
updated for Big Sur
if using unsupported wifi card disable it in bios
FIXED SLEEP WAKE BUG
Exact same functionality as Catalina
What Works / Does Not
Everything works minus in-built mic
Some displays may be detected as 40hz (working on fix)
Never tested USB C over Display Output, everything else works flawlessly
USB devices eject on sleep (not really an issue)
run sudo pmset -a hibernatemode 0
If no mouse, install all voodoo kexts using Kext Utility
This esentially an ultra-simplistic version that is stable without the use of a deploy or complicated file installations and copies.
You can easily view all the SSDT patches along with configuration files for the bootloader as they are all documented clearly in the files.
This does include a copy of Clover, which of course I do not contribute to and am only responsible for the provided files, patches, and kext placements
This guide provides a working setup with little knowledge of the topic and without "optimization" (because often they can break things). But, it is fully functional and preforms properly and is stable
Make sure you are using DW1560 for wifi or else KP. If not using remove BRCM kexts from CLOVER>kexts>other.
Disable Secure Boot
INSTALL (VERY IMPORTANT)
Due to structural changes in the setup of apple's Big sur, this EFI cannot boot the installer it can only boot into a system / device that has already been created and setup.
To do this, you need to install Big Sur to a virtual machine (lots of guides online) and then create an dmg of that system, and restore it onto your HDD using the 'dd' command
There are various guides online how to get this virtual machine setup complete.
You can then use the attached EFI folder to boot and use macOS big Sur
You can use this video to show you how to get your macOS pre-installed onto your hard drive https://www.youtube.com/watch?v=HMU3nhcbWHw
Boot Entry Setup
Due to the fact this BIOS is locked down pretty heavily, reccomended to use Windows to find a free tool to add UEFI boot entries
Messages and Facetime
Gnerate your own Serials, Board Numbers, MLB
There are various guides online to do this and as default they're set to essentially Null (Fakeserial)
This is fairly straightforward and there is lots of external recourses, or you can contact me for support.
Headphones and Audio
All audio from speakers should work perfectly along with Bluetooth and USB audio
no internal mic
MaLd0n for DSDT Patches (HUGE SHOUTOUT)
Original Kext Authors
Congratulations, there really aren't any more steps that are required. Feel free to contact me with any questions.
Send me a coffee/beer email@example.com
*check GitHub for latest releases and faster support https://github.com/tlefko/HP-Envy-13-Big-Sur
I’ve followed the Dortania IvyBridge Desktop configuration guide (https://dortania.github.io/OpenCore-Install-Guide/) as closely as possible for this computer:
Processor: Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz
Motherboard: Asus Sabertooth X79
GPU: NVIDIA GeForce GTX 650 Ti 2 GB
I believe this is a Sandy Bridge or Sandy Bridge-E in reality.
The good: I can boot my existing MacOs Catalina 10.15.6 installation.
I have NO mouse or keyboard (or USB of any kind).
I cannot boot the installer 10.15.6 because it is on a USB thumb drive.
When I boot either installer or MacOs partition, I see the LED indicator on my thumb drive turns off.
The error message that I see that seems to be applicable is:
Waiting on <dict ID=“0”><key>IOProviderClass</key><string ID=“1”>IOResources</string><key>IOResourceMatch</key><string ID=“2”>boot-uuid-…..>
For a glimpse of my EFI folder please see https://github.com/aaronpfoltzer/opencore
I have UsbInjectAll.kext in my Kexts folder and XhciPortLimit set to true. I thought this would temporarily allow USB ports to work until I did the actual USB mapping. My SSDT-EC is done manually but matches the output from SSDTTime anyway. I’ve tried different SMBIOS. (iMacPro1,1 which is what I am using now with Clover, but now iMac13,2 as recommended for IvyBridge Desktops).
I have a Asus Zenbook with the following characteristics:
Model: ASUS Zenbook UX310UQ
CPU: Intel Core i7-7500U CPU @ 2.70GHz
IGPU: Intel HD Graphics 620
RAM: 8GBx2 => 16GB RAM Bus 2133
Wifi: Replaced with DW1560.
Clover: Clover 5120
Storage: SSD Crucial 500GB
Everything works fine!
I have the WiFi/Bluetooth chipset DW1560 (DCM20702A) and a Logitech K380 Keyboard and magic mouse. My Hackintosh is sleeping fine only problem is that it won't wake from sleep on key presses. I already tested this USB port with a normal keyboard and the result was that it wakes up my Hackintosh on key presses. And in system settings the Bluetooth wake option is enabled, too.
Has someone an idea where the problem could be or which additional settings I have to verify?
Thank you all
Lenovo T460 macOS with Clover Guide
Latest Release on GitHub (July 2020)
Updated to Clover r5120
Updated Lilu based kexts - Lilu, ALC, WEG
Various Tweaks over Last months
The main branch in my github repo is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle seems to work on Sierra, HighSierra, Mojave and Catalina. There is an OpenCore branch in the repo as an alternative to Clover. This guide was developed for a Clover implementation. But the thread has evolved to include discussion of both Clover and Opencore for these systems: T460 and T470 family of ThinkPads.
Full Clover file set - config.plist etc.
Includes all custom kexts
Includes custom DSDT/SSDT scripts and patches
The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
Devices and aspects working:
Ethernet - Intel I219LM is enabled via IntelMausiEthernext.kext
WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip
Audio - ALC293 codec implemented via AppleALC.kext (the old AppleHDA_ALC293 and CodecCommander kexts are not needed)
PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt
USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work - 3 external USB and internal Camera, BT, etc
Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices.
Note: have not tried to implement the SD card reader - no driver found.
New Installation - Steps and Details
Part 1 - OS Installation
Part 2- Post OS Installation and Setup
Notes on Custom Kexts