AudioGod's Aorus Z390 Master Patched DSDT EFI for Catalina Mini Guide and Discussion

[matt-uk]

15 hours ago, Stefanalmare said:

https://forums.overclockers.co.uk/threads/9900k-5ghz-1-2v-guide-gigabyte-z390-master.18837783/

 

Thanks for this - no help with f11c bios though. That's why i thought people here might be able to help as it is the bios we all (mostly) use with this EFI.

 

[M0r1d1n]

Has anyone done the Mojave Security Update 2020-004 for 10.14.6? Safe to install?

[Matgen84]

23 minutes ago, M0r1d1n said:

Has anyone done the Mojave Security Update 2020-004 for 10.14.6? Safe to install?

 

 

It's Apple Security Update. Done this morning on Mojave config, of course. 

[M0r1d1n]

10 minutes ago, Matgen84 said:

 

It's Apple Security Update. Done this morning on Mojave config, of course. 

 

OK I'll try to install it now since you're saying it's safe! Thanks. :-)

[Matgen84]

14 minutes ago, M0r1d1n said:

 

OK I'll try to install it now since you're saying it's safe! Thanks. :-)

 

Your previous post about Security Update is OFF TOPIC    but I answer to you. "Software Update" is a part of macOS: it's safe, of course.

[M0r1d1n]

3 minutes ago, Matgen84 said:

 

Your previous post about Security Update is OFF TOPIC    but I answer to you. "Software Update" is a part of macOS: it's safe, of course.

 

True and sorry about that, but I've had macOS "safe" updates fail on Macs before, so I always prefer to ask.

[Matgen84]

12 minutes ago, ainsleyclark said:

Hey,

Are we ok to update to 10.15.6 with the 0.5.9 Opencore EFI?

Thanks!

 

You've to post on Opencore discussion thread  This is OFF-Topic, Bro

[AudioGod]

On 7/7/2020 at 9:47 PM, matt-uk said:

Hi @M0r1d1n

 

Are you able to share the files you have amended with some basic instructions and scenarios to test their effectiveness?

Keen to hear if you make any other progress with the lag issues too.

 

 

@eXtReeM i wonder if @M0r1d1n's SSDT-PLUG.aml and other amends may help with your audio ports/

 

 

SSDT-Plug has nothing to do with audio, what’s the problem with audio anyway?

 

One Thing I have noticed is if you restart from windows to Catalina your loose sound but it won’t happen via a cold. The way to fix that is to uninstall the windows drivers for Realtek audio and then reinstall the drivers again but let windows instal it’s own generic drivers and do not use realteks drivers and the problem will be solved, the reason this happens is because the Z390 Master has a separate DAC and when you use the proper drivers in windows it uses the DAC and then when you boot into MacOS it sees the separate dac and hasn’t got a clue what to do with it causing sound to stop working, 

 

A second problem that happens with external audio devices is it can be choppy and or cut out while doing heavy playback via Logic Audio or Cubase etc etc etc.

The reason for this is a fault on the gigabyte bios where the motherboard has a built in serial port that has no option to disable it and it causes conflicts with audio causing the above I mentioned and also stops the Apple Watch from unlocking the Hack.

There is a fix but its not officially out yet so I don't post it on the thread but if you update the bios to the very latest revision you can then go in to the bios and disable the dam annoying serial port.

If this is indeed your problem then update the bios to this revision and then load in my profile with all the correct settings dialled in and the pesky serial port disabled.

 

Z390AORUSMASTER.zip - Bios F11e 

Default Blue.zip - F11e MSR unlocked profile and bios settings.

 

@M0r1d1n My SSDT-Plug differs to the example one as it was done from scratch and not using there example and done specifically for the master board by myself. They both work fine but I like mine . Haha

Edited July 17, 2020 by AudioGod

[M0r1d1n]

2 hours ago, AudioGod said:

A second problem that happens with external audio devices is it can be choppy and or cut out while doing heavy playback via Logic Audio or Cubase etc etc etc.

The reason for this is a fault on the gigabyte bios where the motherboard has a built in serial port that has no option to disable it and it causes conflicts with audio causing the above I mentioned and also stops the Apple Watch from unlocking the Hack.

There is a fix but its not officially out yet so I don't post it on the thread but if you update the bios to the very latest revision you can then go in to the bios and disable the dam annoying serial port.

If this is indeed your problem then update the bios to this revision and then load in my profile with all the correct settings dialled in and the pesky serial port disabled.

 

I have on-board audio disabled because I use Bowers & Wilkins MM-1 — external USB speakers with a built-in sound card — and have no need for the internal audio. I have occasional (very rare) choppy audio under Mojave on the MM-1s. I wonder if the serial port also interfered with choppy BT audio under Catalina.

 

Where is this BIOS from? Can you give us some more details? Latest on Gigabyte's site is F11c...

 

 

[AudioGod]

5 minutes ago, M0r1d1n said:

 

I have on-board audio disabled because I use Bowers & Wilkins MM-1 — external USB speakers with a built-in sound card — and have no need for the internal audio. I have occasional (very rare) choppy audio under Mojave on the MM-1s. I wonder if the serial port also interfered with choppy BT audio under Catalina.

 

Where is this BIOS from? Can you give us some more details? Latest on Gigabyte's site is F11c...

 

 

 

I got it directly from the gigabyte engineers. I actually have a newer version with built in msr unlock and fusion as options in the bios but for you lot this version is better to use as its tried and tested by many.

try it and use my unlock profile and your find your choppy audio will be no more.

Edited July 17, 2020 by AudioGod

[Locked Down]

4 hours ago, M0r1d1n said:

Where is this BIOS from? Can you give us some more details? Latest on Gigabyte's site is F11c...

 

 

They are on TweekTown. A good source of the latest (beta) bios'

 

Click HERE for Gigabyte BIOS'

[gibbo592]

Any benefits from the latest bios ?

[Locked Down]

On 7/18/2020 at 11:35 PM, gibbo592 said:

Any benefits from the latest bios ?

If everything is running fine then there is no need to update. There are always risks when updating the BIOS so only update it if it adds things you would benefit from, or removes a problem.

[AudioGod]

1 hour ago, Locked Down said:

If everything is running fine then there is no need to update. There are always risks when updating the BIOS so only update it if it adds things you would benefit from, or removes a problem.

@gibbo592  Contrary to what that dude just said I would highly advise updating to the bios and profile I posted. I listed the reason why in the same post.

The year is not 2001 and there’s really no danger or risk in updating a bios now days plus you have a little thing called a dual bios on master so you can revert to the backup bios in the unlikely event of the bios corrupting but I think your chances of being hit by lightning are greater then a bios flash borking your motherboard. It’s safe as houses and won’t corrupt your system in anyway unless your dam unlucky and the benefits from the hackintosh point of view are big and plenty so go for it if you want to.  

 

 

On 7/5/2020 at 5:30 PM, Locked Down said:

 

@AudioGod's one is probably a generic one that covers loads of different systems. The one you created is probably specific to your motherboard, so will not have all the bloatware needed to cover multiple systems.

It is usually best to create SSDT's specific to your own system (MB) rather than use generic ones if possible, as they will be a lot smaller and load quicker. If you are unsure in what you are doing at any point then just sticking with the generic ones will be fine most of the time.

That is totally and completely incorrect Mr Locked Down. My ssdts are pulled directly from my board and made only for the master with no generic ssdt or examples used.  

Edited July 20, 2020 by AudioGod

[Locked Down]

17 hours ago, AudioGod said:

@gibbo592  Contrary to what that dude just said I would highly advise updating to the bios and profile I posted. I listed the reason why in the same post.

The year is not 2001 and there’s really no danger or risk in updating a bios now days plus you have a little thing called a dual bios on master so you can revert to the backup bios in the unlikely event of the bios corrupting but I think your chances of being hit by lightning are greater then a bios flash borking your motherboard. It’s safe as houses and won’t corrupt your system in anyway unless your dam unlucky and the benefits from the hackintosh point of view are big and plenty so go for it if you want to.  

 

 

That is totally and completely incorrect Mr Locked Down. My ssdts are pulled directly from my board and made only for the master with no generic ssdt or examples used.  

 

Chill out dude.

 

I said that if the update adds nothing then there is no point updating, which there isn't. If it does add something then obviously there would be a point in updating. The bios you quoted, F11e, is for the Z390 Master, the poster quoted the "Gigabyte ga-z170x ud5 th" in his post so F11e bios, and your settings profile, is no good for him. A risk for no point is also pointless. Also, plenty of people knacker their motherboards attempting a bios update and the manufacturer advises against it unless absolutely necessary - they should know.

 

Re the SSDT, the poster said that his differed from yours. If you had both done them from the same MB then they should be pretty much the same, if not identical. That is why I asked him how it differs. Not having both, or any actually, of those 2 SSDTs I couldn't check myself, hence asking him what the differences are. It is natural to assume that one MAY be a generic one if they differ wildly, I didn't say that yours was definately generic. I wasn't criticising you, just wondering where the differences were.

[AudioGod]

1 hour ago, Locked Down said:

 

Chill out dude.

 

I said that if the update adds nothing then there is no point updating, which there isn't. If it does add something then obviously there would be a point in updating. The bios you quoted, F11e, is for the Z390 Master, the poster quoted the "Gigabyte ga-z170x ud5 th" in his post so F11e bios, and your settings profile, is no good for him. A risk for no point is also pointless. Also, plenty of people knacker their motherboards attempting a bios update and the manufacturer advises against it unless absolutely necessary - they should know.

 

Re the SSDT, the poster said that his differed from yours. If you had both done them from the same MB then they should be pretty much the same, if not identical. That is why I asked him how it differs. Not having both, or any actually, of those 2 SSDTs I couldn't check myself, hence asking him what the differences are. It is natural to assume that one MAY be a generic one if they differ wildly, I didn't say that yours was definately generic. I wasn't criticising you, just wondering where the differences were.

 

Holly Cow! 

I beg you don’t be telling me to chill out seeing I didn’t say anything wrong to start with but since you have....

Your the one that needs to chill out dude and untwist you’re knickers as I never attacked you I just meant you were incorrect with your assumption,

 

Also he used the example SSDT to create hes and again il repeat myself but I did mine from scratch using no guides or examples and mine is based on MaLd0ns way of doing it and not Acidanthera way so no they probably won’t be the same as I used a different method and way to create it.
 

as for the bios I already explained in an earlier post why I recommend it so for you to advise after that not to do it or suggest it brings nothing to the table didn’t really make much sense to me but whatever.

 

You would have to be extremely thick or stupid (I don’t mean you) to bork a Z390 Master Bios considering it’s a dual bios and can be reverted with ease. My real job is a system installer and Audio/Visual Engineer plus I also do custom builds for clients and manufactures for Displays and shows so I’m heavily connected to all the major players out there company wise and I like to think I know what I’m talking about  (That or i am a dam good blagger, take your pick...lol)

 

Manufactures recommend not using XMP as it voids the warranty of the cpu if you do so does that mean you leave XMP off too seeing intel advise against using it?

Also for the record gigabyte say no such thing about bios updates in this modern day and age and if you don’t believe me speak to a gigabyte engineer and find out for yourself. 
 

Gibbo might have a z170 listed but he also uses a z390 Master, I know this as I have helped him out a few times before so yes it’s totally relevant for him my friend. 

 

Anyway Big Love Man, Big Love....I don’t want beef please mate so let’s just leave it there, smile and be cool ok.  
 

Toddles isn’t it? Hmmmmmm I think so 

Edited July 20, 2020 by AudioGod

[Locked Down]

On 7/20/2020 at 8:13 PM, AudioGod said:

 

Holly Cow! 

I beg you don’t be telling me to chill out seeing I didn’t say anything wrong to start with but since you have....

Your the one that needs to chill out dude and untwist you’re knickers as I never attacked you I just meant you were incorrect with your assumption,

 

Also he used the example SSDT to create hes and again il repeat myself but I did mine from scratch using no guides or examples and mine is based on MaLd0ns way of doing it and not Acidanthera way so no they probably won’t be the same as I used a different method and way to create it.
 

as for the bios I already explained in an earlier post why I recommend it so for you to advise after that not to do it or suggest it brings nothing to the table didn’t really make much sense to me but whatever.

 

You would have to be extremely thick or stupid (I don’t mean you) to bork a Z390 Master Bios considering it’s a dual bios and can be reverted with ease. My real job is a system installer and Audio/Visual Engineer plus I also do custom builds for clients and manufactures for Displays and shows so I’m heavily connected to all the major players out there company wise and I like to think I know what I’m talking about  (That or i am a dam good blagger, take your pick...lol)

 

Manufactures recommend not using XMP as it voids the warranty of the cpu if you do so does that mean you leave XMP off too seeing intel advise against using it?

Also for the record gigabyte say no such thing about bios updates in this modern day and age and if you don’t believe me speak to a gigabyte engineer and find out for yourself. 
 

Gibbo might have a z170 listed but he also uses a z390 Master, I know this as I have helped him out a few times before so yes it’s totally relevant for him my friend. 

 

Anyway Big Love Man, Big Love....I don’t want beef please mate so let’s just leave it there, smile and be cool ok.  
 

Toddles isn’t it? Hmmmmmm I think so 

 

Woah, I wasn't attacking you, just pointing out the obvious. He mentioned the Z170 board in his post - hence your BIOS update was not for him.

Everybody is free to update their BIOS as they wish but if it doesn't add anything for you then why bother. For example, off the top of my head, my Gigabyte Z370 Aorus Ultra Gaming motherboard (an old machine that I use as an unraid server) is running F15. There is a newer BIOS, F16a that adds "Workaround beta BIOS to improve Kingston DDR4-2666 stability concern on some specific memory chip suppliers" and "Add NTFS format support for Q-Flash™"

I don't us Kingston DDR4-266 memory in it and I'm not bothered about NTFS support for Q-Flash. Therefore there is no point in me updating to that version.

 

A screen shot from Gigabyte with the warning :-

Click to choose files

 

I know that it is highly unlikely that anything really terminal would happen but there is always a chance, especially with my luck.

 

What has a cat to do with anything? (Toddles isn’t it? Hmmmmmm I think so )

 

This is my final say on the matter and I'm cool, so let both of us be cool.

 

[AudioGod]

@Locked Down Sweet buddy but the reason I recommend and highly advise moving over to bios F11e or above is for many important reasons that I will list for you now.

 

1. The serial port can be disabled (macOS has no idea what it is and it causes conflicts to usb and the Apple Watch unlock feature)

2. MSR Unlock is baked into the bios so you can enable it or disable it with one click and no tricks. (F11j)

3.  Fusion is baked in to the bios finally so you can do whatever to the lighting without needing windows. (F11j)

4. And this is a huge one, the vcore fluctuations are finally fixed and you get a nice steady voltage.

5. All the missing settings that disappeared from F9 up have been restored.

 

reasons 1 and 2 alone should be a end all be all in the matter from a macos point of view but reason 4  and 5 are massive too from a overclocking and vcore point of view.

 

also he didn’t mention the z170 it’s just in he’s signature nothing else buddy. Check any of hes posts and it will list hes z170 board after hes comment.

 

of course anybody is free to update or not update the firmware but for the above reasons is why I totally and utterly recommend it.

 

Gigabyte have to put that warning up to cover there behinds as we both know how many people don’t have a clue about what they are doing but try and do it anyway.  Talk to gigabyte engineer and your get a different story from them. 

 

Oh and one more thing, from a clover angle it’s vital to use the firmware I say to use with my clover EFI otherwise the dsdt is incorrect for the firmware.

 

that’s it from me about it and I hope this sheds light on upstanding where I am coming from. Peace

Edited July 21, 2020 by AudioGod

[kolutshan]

On top of these already good points comes another: all the security patches (microcode updates) for intel based CPUs which came via firmware updates and are recommended by basically everyone.

[AudioGod]

2 hours ago, kolutshan said:

On top of these already good points comes another: all the security patches (microcode updates) for intel based CPUs which came via firmware updates and are recommended by basically everyone.

Absolutely, That is also a very good and important point bud. 
Thank you. 

 

[kirkfletcher]

Hey I hope somebody can help, I have an Z390 Aorus Master, i9 9900k, 5700 XT. Bios is at f11c and also using the cfg unlock profile. Everything seems to work however, I get no sound out of the rear line out, only works if using the front 3.5mm. In windows there is no issue at all. Every now and then it will work after boot, but tends to stop working after a few mins and have to plug speakers back into the front jack.

Anyone come across this? 

 

p.s. I am using all of AudioGods Opencore EFI, BIOS Profile etc etc so should be identical system.

[AudioGod]

8 minutes ago, kirkfletcher said:

Hey I hope somebody can help, I have an Z390 Aorus Master, i9 9900k, 5700 XT. Bios is at f11c and also using the cfg unlock profile. Everything seems to work however, I get no sound out of the rear line out, only works if using the front 3.5mm. In windows there is no issue at all. Every now and then it will work after boot, but tends to stop working after a few mins and have to plug speakers back into the front jack.

Anyone come across this? 

 

p.s. I am using all of AudioGods Opencore EFI, BIOS Profile etc etc so should be identical system.

silly question but have you got the output selected called internal speakers in macOS?

also does this happen with a cold boot into macOS or does it happen when you restart from windows to macOS?

 

Spoiler

 

 

Edited July 22, 2020 by AudioGod

[kirkfletcher]

3 minutes ago, AudioGod said:

silly question but have you got the output selected called speakers in macOS?

also does this happen with a cold boot into macOS or does it happen when you restart from windows to macOS?

 

Yeah shows as "internal speakers", If I do a cold boot 50% of the time they will work but then only for 10-15 mins max then nothing.

If I unplug "internal speakers" disappears, and plug back in the reappear, so auto sensing is working just no audio. If I plug into the front jack they show as "headphones" and always work

 

Edited July 22, 2020 by kirkfletcher

[AudioGod]

1 minute ago, kirkfletcher said:

 

 

You replied with no reply brother. 

[kirkfletcher]

Just now, AudioGod said:

 

You replied with no reply brother. 

Yeah I slipped haha, have edited now. Sorry :-(