Jump to content

3 posts in this topic

Recommended Posts

Posted (edited)

Good morning,

 

I've the following pieces of hardware:

- i7 6700K

- GTX 1080

- Asus Z170 Deluxe

- NVME hard drives

 

Yesterday I've successfully completed a High Sierra installation (I can't migrate to Mojave due to missing NVIDIA web drivers) but the system (even though it works correctly) seems to show a kernel panic at every shutdown/reboot.

 

Please find the RunMe.app report attached.

 

A couple of notes:

- I've installed the audio kexts through the acidanthera AppleALC procedure

- I've generated the SSDT with pikessdt script

- Nvidia web drivers have been installed with the vulgo/webdriver.sh script that requires the WhateverGreen and the ngfxcompat=1 boot argument

- AirportBrcmFixup.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext have been used to unlock the full potential of the integrated Wi-Fi card

- I've tried to clean nvram and motherboard CMOS with no avail

- I've tried to update Clover to the latest version but it always results in an unbootable system

 

It's a pity because everything seems to work correctly (USB ports, graphics, Wifi card, Continuity and so on. I haven't tried sleep but I don't use it anyway :)) but this crash is fairly annoying.

 

Thank you very much,

Alesss

 

Send me Ales-iMac.zip

Edited by Alesss

Share this post


Link to post
Share on other sites
Advertisement
Posted (edited)

I managed to get rid of the Kernel Panic by NOT patching the USB and removing the GenericUSBXHCI.kext.

 

 

Everything seems to be working great :whistle::thumbsup_anim:

Edited by Alesss

Share this post


Link to post
Share on other sites

efi with correct config, dont need install clover, etc, just mount efi partition and paste efi folder there

EFI.zip

DONT NEED USE KEXTS IN SYSTEM FOLDER, USE INTO CLOVER/KEXTS/OTHER

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By shinho73
      Hello everyone. I managed to install AMD Sierra V5(10.12.6) on my old AMD A8 7600 PC(Mother Board-A58M-E, GPU- Palit Geforce GT730 DDR3). Everything is working except the GPU. The GT730 DDR3 GF108 is natively supported on Sierra, but for some reason, it is not working. On Clover Config, "Inject Nvidia" is selected, no Nvidia Web, and nv_disable=1. On "About This Mac" it just says " NVIDIA Chip Model 3 MB".
      I have attached config.plist. Can someone look at it please? Any help will be greatly appreciated. Thank you. 





      config.plist
    • By fusion71au
      Clover r5050 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r5050 for VMware.zip". Mount Clover-v2.5k-5050-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI CLOVER Z390 DESIGNARE.zip
       
      ---OPENCORE FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI OPENCORE Z390 DESIGNARE.zip
       
      ---DSDT patch requests is here---
       
      https://olarila.com/forum/viewtopic.php?f=19&t=1131
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By FabianHansi
      Hello everyone,
       
      I have got two ntfs programs for mac. Paragon NTFS and Tuxera. Both are causing a freeze/restart (freeze due to debugx100, wont allow the system to reboot, but I need it, otherwise mac os wont boot 100%) if I try to mount my windows drive on a samsung 970 + nvme 1TB. If I uncheck automatic mounting for this drive, my system wont freeze/reboot.
      Does anyone have an idea how i could fix this issue and use my samsung 970 drive?
    • By kylon
      Cloud Clover Editor is an open source application that allows you to manage various Hackintosh Bootloaders configs everywhere.

      Open Cloud Clover Editor
       
      Cloud Clover Editor Wiki
      Cloud Clover Editor Sources
       
       
      Features
      Supports Clover EFI, Ozmosis, Chameleon, OpenCore GUI and Text Editor Mode CCE Bank Mobile friendly  
      Officially supported browsers
      Chrome 42+ Microsoft Edge 14+ Firefox 39+ Safari 10+ Opera 29+ Opera Mobile 12+ Chrome for Android 75+ Firefox for Android 67+  
       
      Credits
      mackie100 - took some ideas from his app Clover EFI dev team Eric Slivka - new serial number Virtual1 - new serial number cecekpawon - PHP 5.3.3 patch, , help with the ACPI Loader Mode flag and more Micky1979 - Clover flying editor  (Discontinued) crusher. - Help with the ACPI Loader Mode flag Download-Fritz - Help with the ACPI Loader Mode flag Pavo - Ozmosis fields and values stehor - Ozmosis fields and values Sherlocks - General help and support gujiangjiang - General help and support  
      Please let me know if i forgot you!
×