1 post in this topic
Recently Browsing 0 members
No registered users viewing this page.
I have tried to install clover via no UEFI legacy mode (and with UEFI method) using the method here (http://www.tonymacx86.com/yosemite-desktop-guides/144426-how-install-os-x-yosemite-using-clover.html)
both times I can get to just past the clover boot screen and it freezes after that.
I have verbose (-v) selected in boot options: On the non-UEFI install then it hangs on:
"Waiting on <dict ID="0"><key>IOProviderClass</key>...."
I have had a lot of issues with trying to get the installer working and many different things that had to be disabled but now it just gets to here and stops. Some times it will glitch out on this screen and give me a the circle with the line through it and text garbage around it where the text in the pictures are.
Need help please.
This is the laptop im using the specs are the same nothing has changed.
This project is dedicated to the memory of Mausi, the cat I loved more than anybody else.
A few days before Christmas I started my latest project, a new driver for recent Intel onboard LAN controllers. My intention was not to replace hnak's AppleIntelE1000e.kext completely but to deliver best performance and stability on recent hardware. That's why I dropped support for a number of older NICs. Currently the driver supports:
82578LM 82578LC 82578DM 82578DC 6 and 7 Series
82579LM 82579V 8 and 9 Series
I217LM I217V I218LM I218V I218LM2 I218V2 I218LM3 100 Series (since V2.1.0d0)
I219LM I219V 200 Series (since V2.3.0d0)
I219LM I219V 300 Series (since V2.4.0d0)
Key Features of the Driver
Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). Support for TCP/IPv6 and UDP/IPv6 checksum offload. Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data (disabled due to hardware bugs). Fully optimized for Sierra (64bit architecture) but should work with older 64bit versions of macOS too, provided you build from source with the appropriate SDK for the target OS. Support for Energy Efficient Ethernet (EEE). VLAN support is implemented but untested as I have no need for it. The driver is published under GPLv2.
The driver has been tested successfully with I217V, I218V and 82579V under 10.9.5 and above. The attached archive includes source code as well as a prebuilt binary (debug version) for Mavericks and newer versions of macOS. Known Issues
There seem to be problems while using VMware with version 1.x.x of the driver. In case you are affected use version 2.0.0 or newer.
Could you add support of for...? Well, you are probably asking me to add support for one of the older NICs like the 82571/2/3/4L or 82583 and the answer will be no as I dropped support for these chips intentionally. They are broken and I lost more than 2 weeks trying to make it work on the 82574L without success. I was asked to add support for I210, I211 and I350 but as these chips have a completely different architecture, which isn't supported by the underlying Linux driver, this is impossible, sorry. Does it work with Snow Leopard or 32 bit kernels? No and I have no plans to make a version for 32 bit kernels or anything older than Lion. WoL from S5 doesn't work with this driver but under Windows it's working. Is this a driver bug? No it isn't, the driver is working as it should because OS X doesn't support WoL from S5.
Goto /S/L/E and delete AppleIntelE1000e.kext. Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. Reboot. Install the new driver and recreate the kernel cache. I recommend to use Kext Wizard or a similar utility for the installation. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface.
Help - I'm getting kernel panics!
Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches.
As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches:
Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again.
Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "grep kernel /var/log/system.log" in Terminal. Starting from Sierra use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me. Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any AppleIntelE1000e.kext from your system because it could prevent the driver from working properly. Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000. In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable. Changelog
Version 2.4.0 (2018-04-14) Added support for 300 series versions of I219LM and I219V. Updated underlying Linux source code. Version 2.3.0 (2017-06-20) Added support for 200 series versions of I219LM and I219V. Version 2.2.0 (2016-09-23) Disabled TSO to work around a hardware bug. Version 2.1.0 (2016-05-24) Added support for I219LM and I219V Version 2.0.0 (2015-04-22) First official release which is identical to 2.0.0d2 (only the version number has been changed). Version 2.0.0d2 (2015-04-04) Changed the tx descriptor write back policy for 82579, I217 and I218 to prevent random tx deadlocks. Version 2.0.0d1 (2015-03-14) Uses Apple's private driver interface introduced with 10.8. Supports packet scheduling with QFQ Solves the VMware issue. Version 1.0.0d6 (2015-03-04) Reworked TSO6 support to avoid problems with VMware. Wake-on-LAN now working. Version 1.0.0d5 (2015-02-27) Reworked TSO4 support to eliminate the bug of 1.0.0d4. Added some debug code in order to collect information about the VMware related issue. Version 1.0.0d4 (2015-02-25) Set total length field of the IP-header to zero for TSO4 operations. Report EEE activation state in kernel log message when the link has been established. Version 1.0.0d3 (2015-02-11) Reworked media selection and EEE support (EEE is now activated when both link partners support it. It can be disabled selecting the medium manually). Duplex setting for 10/100 MBit connections is now reported correctly. The number of tx descriptors has been reduced from 2048 to 1024. The code has been cleaned up and obsolete files have been removed. Version 1.0.0d2 (2015-01-31) First development release. Getting the Driver
The source code can be found on GitHub: https://github.com/Mieze/IntelMausiEthernet There is also a prebuilt binary for 10.11 and above in the download section: http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/ Build from Source for 10.8
Register as a developer on Apple's developer website. A free membership is sufficient. Download a copy of Xcode 5.1.1 and install it on your machine. In the project select 10.8 as the "Base SDK" and the "Deployment Target". Call "Archive" from the menu "Product" and save the built driver. Credits
Thanks to RehabMan and Yung Raj for running tests and pointing me in the right direction while I was trying to fix TSO. Special thanks to Yung Raj for motivating me when I was about to give up.
MOJAVE HACKINTOSH GUIDE
**FOR** GIGABYTE Z390 AORUS PRO
CREDITS & THANKS
His help with EFI configuration and DSDT
Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon Et al
autumnrain, slice2009, zenith432
ESP PRO MOUNTER
JoniVR & theOneyouseek
• Intel I7 8700
• Gigabyte Z390 AORUS PRO
• Gigabyte AORUS RADEON RX 580 8GB
• Corsair Vengeance LPX 16GB ( 2 x 8GB ) 2666MHz – CMK16GX4M2A2666C16 In this build, both memory modules are installed in memory slots DDR4_A1 and DDR4_B1
• Corsair RM650x 80 Plus Gold Power Supply Unit
• Corsair H100i V2 AIO Hydro/Water RGB LED CPU Cooler
• Samsung EVO 500GB SSD (2.5) macOS Mojave
• Samsung EVO 250 GB SSD (2.5) Windows 10 Pro
• NZXT H500 Mid Tower ATX Case
• RECOMMENDED WIFI CARD → ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS
• WIFI and Bluetooth with BCM94331CD with PCI-e adapter (but will require AirportBrcmFixup.kext for AirDrop.. )
** Avoid Samsung EVO 970 PLUS as Hackintosh has problem with that device **
• HDMI audio on RX580
• Ethernet Port
• SSD Trim
• USB 3.0 & 2.0
• Hardware Acceleration
PART 1 - DOWNLOAD
Download the following:
• PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip
• POST-INSTALL Aorus Pro Z390 EFI - RX580.zip
// INTEL UHD 630 EFI Aorus Pro Z390 EFI's below. For those who do not have a Graphics Card Installed in PCIe Slot, requires Initial Display Output BIOS setting to be changed to IGFX spoiler below!
• PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
• POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
• ESP MOUNTER PRO v1.9
• macOS MOJAVE
• CLOVER CONFIGURATOR
• EmuVariableUefi-64.efi ( Used only to initialise iMessages. It then must be removed from Clover drivers64UEFI folder as will cause intermittent memory allocation errors on boot, explained in guide)
• Native Display Brightness with MonitorControl
PART 2 - BIOS SETTINGS (version F5 )
Here is a list of the BIOS settings that I have used ( Screenshots in spoiler below )
• Enter BIOS → Press F12 → Enter Setup
• Save & Exit → Load Optimized Defaults
• BIOS → Windows 8/10 Features → Other OS
• BIOS → CSM Support → Enabled
• Peripherals → Initial Display Output → PCIe 1 Slot
• Peripherals → Trusted Computing → Security Device Support → Disable
• Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support → Disable
• Peripherals → USB Configuration → Legacy USB Support → Enabled
• Peripherals → USB Configuration → XHCI Hand-off → Enabled
• Peripherals → Network Stack Configuration → Network Stack → Disabled
• Peripherals → SATA And RST Configuration → SATA Mode Selection → AHCI
• Chipset → Vt-d → Disabled
• Chipset → Internal Graphics → Enabled
• Chipset → DVMT Pre-Allocated → 64M
• Chipset → DVMT Total Gfx Mem → 256M
• Chipset → Audio Controller → Enabled
• Chipset → Above 4G Decoding → Disabled
• Power → ErP → Disabled
• Power → RC6 (Render Standby) → Enabled
// IF USING CORSAIR H100i V2 AIO CPU WATER COOLER
• MIT → Smart Fan 5 Settings → CPU Fan Control mode → PWM
• Save & Exit → Save & Exit Setup
SCREEN DUMP SPOILERS
PART 3 – CREATE A MOJAVE USB FLASH INSTALLER
Prepare USB Installer for Mojave ( Video below )
• Insert USB drive
• Launch /Applications/Utilities/Disk Utility
• Disk Utility → View → Show All Devices
• On Left-hand panel → External →(Identify your USB device in left hand panel)
• Click and highlight your USB device in the left-hand panel.
• Click erase button.
• Name: USB
• Format: Mac OS Extended (Journaled )
• Scheme: GUID Partition Map
• Click Erase button.
• Place the downloaded MacOS Mojave app into Applications folder.
• Open Terminal copy and paste:
sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction && say Mojave Drive Created • Enter
PART 4 – INSTALL CLOVER ON THE MOJAVE USB INSTALLER
Make Mojave USB flash drive installer bootable.( Video below )
• Launch Clover application, double click.
• Click Continue → Continue → Continue
• Click Change Install Location button.
• Click Install macOSMojave USB installer → Continue
• Click Customise button
Clover for UEFI booting only Install Clover in the ESP Themes UEFI Drivers Install RC scripts on target volume NO NEED TO INSTALL RC SCRIPTS ON USB INSTALLER • Click Install button
• Installation Complete!
PART 5 – CUSTOMIZE MOJAVE USB INSTALLER FOR AORUS Z390 PRO
Replace Clover EFI folder with PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip OR if no graphics card installed in PCIe slot, then use PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip ( Video below )
• Install ESP Mounter Pro v1.9
• Using ESP Mounter Pro, Mount ESP on disk2s1 ( Your disk name may be different )
• Open mounted EFI partition found on desktop
• Copy all the contents from Aorus 390 Pro EFI folder
• Replace USB EFI folder with all the contents inside the Aorus 390 Pro EFI folder.
PART 6 – INSTALL MAC OS MOJAVE ON INTERNAL DRIVE
ENSURE BIOS: Above 4G Decoding is set to Disabled
if Above 4G decoding is set to enabled then macOS Mojave install will freeze at 2 mins remaining and will not shut down properly!!!!
Please be patient during install, so when install gets to 2 or 3 mins remaining then it may take extra time. Be ready to boot from UEFI USB installer by pressing F12 when install initiates restarts.
• INSERT USB INSTALLER INTO THE USB 2.0 PORT
• Power on PC and press F12• Choose bootable USB drive from boot menu.
• Install macOS Mojave to internal solid state or hard drive.
When system returns to the Clover boot menu choose:
• Boot macOS Install from Macintosh
At next restart, press F12 and boot from external UEFI USB device and choose:
• Boot macOS Install from Macintosh
Proceed with macOS Mojave install
macOS Mojave is now installed, but it can only boot at this moment thanks to FakeSMC and Clover on the Mojave USB flash drive installer.
PART 7 – MAKE AORUS Z390 PRO INTERNAL DRIVE BOOTABLE
Make internal drive bootable ( Video below )
So far, the Aorus Pro can only boot the internal system drive with the aid of the Mojave USB Installer.
To boot from the internal system drive without the installer:
Download and install Clover with RC Scripts on target volume.
If your Aorus Pro Z390 has AMD RX 580 then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - RX580.zip folder and paste it inside the the System Drive EFI partition. OR
If your Aorus Pro Z390 has no graphics card installed in PCIe slot, then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip folder and paste it inside the the System Drive EFI partition.
• Remove USB Mojave installer and shut down and restart.
Aorus Hackintosh should now be able to boot to macOS Mojave, Done, well almost !
PART 8 – ENABLE IMESSAGES & FACETIME
Configure Config.plist for iMessages. ( Video below )
• SMBIOS = Mac Mini 8.1
• Rt Variables —> ROM —> is your MAC address (delete colons from Mac address)
• MLB field = Enter serial number generated and append 5 random characters
• SmUUID = in Terminal run command “uuidgen” and copy it to SmUUID field
• Board Serial is same as MLB field.
• Clover Configurator —> Save
• Mount internal drive EFI/ESP partition
• Go to folder CLOVER → drivers64UEFI
• Delete AptoMemoryFix-64.efi
• Place both EMUVariableUefi-64.efi and OsxAptoFix2Drvfree2000.efi inside → drivers64UEFI
Using Clover Configurator, add the following argument to config.plist using Clover Configurator.
• Slide = 0
Shutdown and then press power on button on PC.
• You should now be able to Log into iCloud, iMessages and FaceTime
• NOW delete EMUVariableUefi-64.efi from CLOVER → drivers64UEFI Folder
• Shutdown and restart Aorus Pro hackintosh. iMessages etc is now operational without EMUVariableUefi-64.efi ( EMUVariableUefi-64.efi only needed to initialise iMessages )
• It is important to delete EMUVariableUefi-64.efi, this will avoid very intermittent boot errors such as: “Couldn’t allocate runtime area” post errors.
PART 9 – ENABLE TRIM for Solid State Flash Drives
Open Terminal and enter the following command:
sudo trimforce enable
DEFAULT SSDT – DEFAULT SSDT USB PORTS FIX CONFIGURATION - SSDT ALREADY INSIDE AORUS Z390 EFI FOLDER
Limitation: USB2 devices can not be used on SS03 → SS08
------------ GUIDE FINISHED YOU SHOULD NOW HAVE WORKING AORUS Z390 PRO HACKINTOSH WITH SSDT USB FIX ------------
OPTIONAL: Set Wi-Fi Country Code
OPTIONAL: System Information - PCI
OPTIONAL: Enable HDMI Audio on RX580
OPTIONAL: Native Display Brightness - with MonitorControl
OPTIONAL: Dual Boot macOS Mojave & Windows 10
OPTIONAL: Replace the default "About This Mac" Apple Logo with RED AORUS APPLE
OPTIONAL - ALTERNATIVE SSDT 1 – SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder
OPTIONAL - ALTERNATIVE SSDT 2 - SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder
OPTIONAL - ALTERNATIVE SSDT 3 – Create your own SSDT
FRAMEBUFFER PATCHING – For working Intel UHD 630 Graphics, working HDMI Port, working HDMI Audio on Aorus Z390 Pro
FOR MORE HACKINTOSH INFORMATION SUCH AS USB PORTS FIX, CLOVER CONFIGURATOR, HACKINTOSH BACKUP WITH CARBON COPY CLONER ..... THEN SEE MY PREVIOUS GUIDE FOR ASUS Z370-G Strix