Hi guys i have a problem install macOs Mojave on my PC, I have this configuration:
CPU: Ryzen 7 2700X; GPU1: GTX 970 Strix(For game rendering and 144Hz Monitor); GPU2: GTX 750ti Strix(For 2nd monitor rendering to get 100% performances from 1st 144Hz Monitor); MotherBoard: MSI x470 GAMING PLUS Hard Disk 1 (Windows 10): Samsung EVO M.2; Hard Disk 2 (For Storage): RAID (1) between two hard disks; Hard Disk 3 (For Mojave): Kingston SSD 120GB;
I have created my USB with this:
Create Bootable USB
sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB -- /Applications/Install\ macOS\ Mojave.app -- nointeract && say Done.
XMPDetection = No.
Devices: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓])
Inject (Full Enabled);
Add ClockID (Full Enabled);
FixOwnership (Full Enabled);
Gui: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓])
Enabled (Full Enabled);
Screen Resolution: 1920x1080;
Kernel and Kext Patches: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓])
Apple RTC (Full Enabled);
KernelPm (Full Enabled);
Inject Kexts = Yes;
Inject System ID;
VT-d = Disabled;
XHCI Hand-Off = Enabled;
Legacy USB Support: Enabled;
Hard Disk: AHCI Mode;
Selection Mode: Legacy + EUFI;
Clover Install Log:
Full Error Log:
Control temperature of Intel and AMD CPU
Control temperature of AMD, Intel and NVidia cards
Control temperature of motherboard
Control HDD/SSD state (SATA & NVMe) with S.M.A.R.T. monitoring
Laptop Battery Monitoring
Different applications support
High Sierra compatible
Installation to /S/L/E or in the ESP (Clover only)
English (base), Russian, Italian, Korean and semplified Chinese
Source code: at https://sourceforge.net/p/hwsensors/hwsensors3/code3/HEAD/tree/
Bugs report at https://sourceforge.net/p/hwsensors/hwsensors3/tickets/
Topic for discussion at: https://www.insanelymac.com/forum/topic/299861-hwsensors3/
Chief Developer @Slice, new HWMonitorSMC2.app and package by @vector sigma
Sorry for the vague subject line, but I think I have a hardware issue and I'm having trouble diagnosing it. This is a LONG post because I'm trying to explain what I tried and to give you all the info that I do have.
History: This has been a successful Hackintosh for 2 years 2 months. I have not changed the OS (still running 10.11.4) just to avoid any problems. I have not changed the hardware other than GPU about a year ago, hard drives over time, and RAM about two weeks ago. (Keep that RAM in mind.)
Motherboard: ASRock Z170 OC Formula
CPU: Intel i7-6700K
RAM: G.SKILL Ripjaws V Series 32GB DDR4 @2400, replaced with Corsair 64GB DDR4 @2133 (but lower CAS latency)
GPU: MSI GeForce GTX 970
PSU: CORSAIR AX760 760W 80+ Platinum
CPU Heatsink: CORSAIR Hydro Series H105
Problem, Tuesday Night: Catastrophic death. Just shut down, couldn't get it up. I spent over two hours midnight–2am, then another hour after I got up in the AM, determining that the heatsink pump had died. To make a three hour story short, the errors on the motherboard were all related to RAM, but it had been running fine with the new RAM for 10 days. I put in the old RAM and got the computer to boot, and then I heard that the fans were going full-tilt and saw the CPU temperature at just under boiling. And it shut down. I determined it was the pump and not motherboard because the pump did not turn on when I moved it to a header on the motherboard that had just been powering a fan that was fine. So I ordered a new CPU cooler and installed it yesterday.
Problem, Sunday Night: It was running fine for a day, after installing the new CPU heat sink. We had a brown-out in the morning which apparently did NOT trip any UPS in the house, and the computer restarted. Seemed fine, then tonight (11 hrs after the brownout), I went to make dinner, came back and all the fans were going and the computer wasn't on. The light on the Corsair pump was flickering.
Trying to Diagnose: So, with the light flickering, I thought maybe it was the motherboard after all, and the CPU fan 1 was just dead (or dying). No problem, moved it to CPU fan 2 and moved the fans for the heatsink to chassis 2 and tweaked the fan speeds in the BIOS (I was able to boot to it) and ... couldn't boot. I can get to the BIOS. I can start getting to the Mac OS, but I can't actually boot fully. The motherboard is cycling between error codes 00 and 19, which from what I can find means CPU (00) or RAM (19). I have tried powering the whole system down (on the PSU) for awhile, going back to the old RAM (works but then same error code on reboot), and even going to a passive heatsink I had in storage.
Why this May Be a Hackintosh Question: I have a pattern now to diagnose. After hitting the restart a few times, I can get into the BIOS, no longer getting the 00/19 error on the motherboard. I can get to the Clover boot menu, at which point the diagnostic LED on the motherboard turns off. I can start the Mac OS, it spits out a bunch of diagnostic stuff, and then freezes, and the lights on the motherboard turn back on and flash between the 00 and 19 errors and the display shuts off. I get to the same spot in the Mac OS startup, and that's when it shuts down. To me, from the zero that I know about this, it looks like it's saying there's a CPU error. Meaning I may have fried the CPU (or motherboard? or both?) during that initial CPU cooler failure five days ago. I have attached a screenshot from the video I took of the screen while starting up the last time.
CMOS Reset: I tried doing this as an addendum, after taking pictures of every screen in the BIOS so I could restore. The reset definitely reset the BIOS, I got it to boot to the BIOS again, but I'm stuck at the same death point as in the screenshot. The ONLY difference is that now instead of just stopping there, it goes black for a few seconds and returns to the BIOS option screen (F2 for BIOS, F11 for Boot, etc.), and then tries to boot the Mac OS again. Fails at the same point again, the only difference each time is that in that "Backtrace (CPU #) ..." line, the # changes, and the com.apple.lokit.IOBluetoothHostController... hex stuff is different.
Help!? Do I need a new motherboard and CPU? Fortunately, everything is backed up hourly, and on my laptop, and the HDDs should still be fine.
Hello everyone, I'm new to the forum and I'm a little lost ...
I am looking for a shopping guide (a bit like tonymac which is very good, I come here because of an ethical problem of tonymacs http://goo.gl/WdPxAy).
I currently have a machine with the following config:
Mb Asus H87M-PLUS
RAM 16GB Kingstone HyperX Blue
SSD Intel 128GB
GPU Gainware Nvidia GTX 650 Ti
It works pretty well apart few random crashes ...
It was installed with *beast tools...
I manually installed and configured clover and I want to make a new machine with a clean and much more advanced installation.
I wanted a multibooting to Win10 Pro and Mac OS High Sierra 10.13.3 (in preference but it can be Sierra 10.12 for stability)
I started looking at material:
Mb Gigabyte Aorus GA-Z270X-GAMING K5 / Gigabyte GA-Z270N-WIFI / Gigabyte GA-B250M-D3H / Gigabyte GA-H270M-DS3H
RAM HyperX Fury Noir 16 Go (2x 8Go) DDR4 2133 MHz CL14
SSD Samsung 840 EVO 256GB Sata III
GPU Gigabyte GeForce GTX 1050 OC Low Profile 2G