Jump to content
bell47

Black screen without USB key on Sierra with Clover

4 posts in this topic

Recommended Posts

Hello

 

I'm French, so excuse me for the approximate language......


I was on Mountain Lion without problems and I installed a new Sierra system with Clover and rebooted with the key but when I remove the Clover USB key no longer "sees" my hard drive.
"loading operating system" then black screen.
Anybody got any ideas?

Thank you

 

Gigabyte H61N-USB3 F8

 Intel Core i5
 Mémory    8 Go
 

Share this post


Link to post
Share on other sites
Advertisement

Hi Allan

 

Thanks for your answer.

Finally I abandoned Sierra and High Sierra and installed El Capitan with a post from Tonymac:
Gigabyte H61N-USB3 - El Capitan SUCCESS!!
I had fortunately cloned my old 10.8 system with Super Duper on a partition.
I can reboot on both systems but only with my [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] key.
If I remove the key the boot locks to "loading operating system" in any case.

Best regards

 

Pascal

 

 

 

Send me Pascals-Mac-mini.zip

Share this post


Link to post
Share on other sites

Still nobody to help me?

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By necros
      Hi all, new user here.
      I followed the shilohh guide i7-4930k-asus-rampage-iv-extreme-32gb-ram-gtx-770-4gb-success(and some other guides fresh installing) and everything works great but my cpu is flat at 1.2Mhz. 
      I tried every guide here, in olarila and in "others" but nothing works. Surely I'm doing something wrong but I cannot guess what it is. Also tried nullcpu etc..
      My specs are:
      Rampage IV Extreme
      i7 3930k
      Gtx 980
      Mac OS X 10.12.6
      I made my own SSDT too.
      C1E is enabled.
      I leave my Clover Folder here in case someone can shed some light because I'm starting to be desperate.
      Thank you in advance
      Cheers
       
      CLOVER.zip
    • By fusion71au
      This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.

      It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
       
       
      Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.

      Prerequisites
      Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”  
      Procedure
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Open OS X terminal and type the following lines, followed by <Enter> after each line.
          The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
       
      sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg  -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3.  Right click on the “OS X Base System” Volume and click “Get Info”
       

      4.  Click on the lock icon and untick “Ignore ownership on this volume”
       

      5.  Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist.  NB It is found in the "Essentials.pkg" in /System/Installation/Packages
       

      6.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
       

      7.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
       

      8.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
       
      sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.


      9. Install your Bootloader targeting the OS X Base System volume
       
       
       
       
      10.  Boot your system with the USB without injected kexts into the OS X Installer GUI....
       
       
       
       
       
      Post Install
      The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts.  In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
       
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
      3.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
      4.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel.  In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
      sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume.  This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
      6. Reboot your system without injected kexts into El Capitan!
       
       
      Other links
      The All-In-One Guide to Vanilla OS X for beginners
       
      Updates for Sierra and High Sierra   Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:   1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.   2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem  4.  Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.       macOS High Sierra bypass Firmware and MBR checks in post#13.
      BaseSystem_PLK.tool_ElCap.zip
      BaseSystem_PLK.tool_Sierra.zip
      BaseSystem_PLK.tool_Mojave.zip
    • By thehexabyte
      Hey all.
      I'm trying to install macOS Sierra on a partition of my main PC (specs below), and I keep running into the same problem. Once I get past the Apple logo and loading bar, it will stick. Whether that's while choosing a language or even before the installer shows up.
      Sometimes I get to the language picker, and when I pick the language and click the next arrow, the words will stop and the button will become greyed out. I can still move my mouse and select languages but nothing else. Or I don't even get to that. Sometimes it just displays the background of the installer with a cursor that I can move. I've waited for ages and nothing happens. Also, sometimes it'll reboot and when it does in verbose mode, it reboots too quickly to see the panic.
       
      Sorry I'm very new to hackintoshes.
       
      Hayden
       
      Specs:
      Intel Core i5-6400
      Intel HD Graphics 530
      8GB DDR3 RAM
       
      The computer is a prebuild HP Pavilion 550-251na Desktop.
    • By MaLd0n
      Now have a Olarila Folders app, just download app and clover folder for your Chipset! Download Folders.app     First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with Skylake patches DSDT.MaLd0n GA H110M-S2.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI --FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      Now have a Olarila Folders app, just download app and clover folder for your Chipset! Download Folders.app     Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover UEFI in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install Sierra and boot into system!   --Install Clover UEFI and replace with my folder  CLOVER POST INSTALLATION.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edit... Run it RunMe.app   --DSDT My DSDT DSDT.ASUS H61M-A MaLd0n.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -EHCx -LPC -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF Clear NVRAM, Purge and Kextcache
          --FakeSMC http://www.hwsensors.com/releases --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
×