dugajimi Posted July 13, 2018 Author Share Posted July 13, 2018 22 minutes ago, MARZILLO said: per l'audio in efi metti applealc e lilu.kext..la tua scheda dovrebbe avere alc1150(mi confermi) quindi sul config sezione devices\audio provi i layout 1, 2, 3, 5, 7, 11 uno alla volta seguito da un riavvio...per la rete usa il kext che avevi prima.lascia stare il kext realtek L'audio funziona. Riassumo anche per me stesso. Ho messo in EFI/CLOVER/kexts/Other -> AppleALC.kext e Lilu.kext Tolto realtekALC da EFI/CLOVER/kexts/10.13 nel config.plist devices\audio Inject ho messo 1 Per la rete ethernet ho messo in EFI/CLOVER/kexts/10.13 -> AppleIntelE1000e.kext Purtroppo non posso verificare al momento se funziona perchè ho il pC lontano dal modem ma nella precedente istallazione con El Capitain funzionava. Il prossimo passo dovrebbe essere istallare i driver NVidia. Noto però una cosa strana: Da Resoconto di Sistema me la segnala correttamante e mi dice anche che ha 2047 MB di VRAM. Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625682 Share on other sites More sharing options...
MARZILLO Posted July 13, 2018 Share Posted July 13, 2018 se te la segnala gia vuol dire che è riconosciuta quindi la lascerei cosi per il tri da terminale sudo trimforce enable...dai invio....quando lo richiede riavvia Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625683 Share on other sites More sharing options...
MARZILLO Posted July 13, 2018 Share Posted July 13, 2018 per l'ibernazione prova a lanciare lo script dell'ottimo gengik e vedi se va...altrimenti forse bisogna mettere le mani al dsdt...e qui ci vuole il sommo.... Fix_Hibernate (1).zip Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625684 Share on other sites More sharing options...
dugajimi Posted July 13, 2018 Author Share Posted July 13, 2018 (edited) 1 hour ago, MARZILLO said: per l'ibernazione prova a lanciare lo script dell'ottimo gengik e vedi se va...altrimenti forse bisogna mettere le mani al dsdt...e qui ci vuole il sommo.... Fix_Hibernate (1).zip Funziona sia il trim che il risveglio. Ho controllato le USB e sembra che vadano bene. [EDIT]: Invece le porte USB non vanno tutte bene. Le ho controllate ad una ad una e ho scoperto che: funzionano correttamente soltanto 2 USB3 su 4 posteriori; una USB2 su 2 posteriori; e le due USB anteriori che non so di che tipo sono Segnalo però la tendenza a non settare definitivamente le impostazioni. Ad esempio ho impostato il login automatico ma al successivo riavvio mi richiede la password. Edited July 13, 2018 by dugajimi Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625685 Share on other sites More sharing options...
gengik84 Posted July 13, 2018 Share Posted July 13, 2018 per le usb devi mettere la patch per port limit Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625698 Share on other sites More sharing options...
dugajimi Posted July 13, 2018 Author Share Posted July 13, 2018 15 minutes ago, gengik84 said: per le usb devi mettere la patch per port limit come si fa? Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625702 Share on other sites More sharing options...
gengik84 Posted July 13, 2018 Share Posted July 13, 2018 config modificalo con clover configurator sezione Kernel and kext patches/kext to patch https://www.macos86.it/viewtopic.php?p=30#p30 metti quella relativa alla versione di 10.13 che hai Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625704 Share on other sites More sharing options...
dugajimi Posted July 14, 2018 Author Share Posted July 14, 2018 Allora pare che tutto funzioni: audio Ok USB Ok Trim attivato Stop OK wifi OK Scheda video riconosciuta fin da subito Cos'altro devo fare per controllare se è tutto a posto? DSDT? oppure non serve? Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625768 Share on other sites More sharing options...
gengik84 Posted July 14, 2018 Share Posted July 14, 2018 dsdt già lo avevi, erro? il PM usi ssdt,giusto? Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625769 Share on other sites More sharing options...
dugajimi Posted July 14, 2018 Author Share Posted July 14, 2018 55 minutes ago, gengik84 said: dsdt già lo avevi, erro? il PM usi ssdt,giusto? Si ho gia un DSDT. ssdt dove lo trovo? Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625773 Share on other sites More sharing options...
MARZILLO Posted July 14, 2018 Share Posted July 14, 2018 Leggi la guida e crea il tuo ssdt https://www.macos86.it/viewtopic.php?f=42&t=57 Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625796 Share on other sites More sharing options...
dugajimi Posted July 14, 2018 Author Share Posted July 14, 2018 Ho creato il file ssdt e questi sono i risultati. Come interpretarli? Intel Power gadget mi dice che la frequenza è intorno a 3,5 GHz, lo script pare che il processore vada o 800 o a 3500 MHz. Soprattutto il grafico dell'utilizzazione va in continuo da 0 a 100% Questi dati sono buoni? E come è possibile intervenire se non sono buoni? Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2625814 Share on other sites More sharing options...
dugajimi Posted July 17, 2018 Author Share Posted July 17, 2018 Nessuna risposta devo presumere che va bene. Invece lato USB non va per niente bene: mi sono accorto che funzionano regolarmente solo 2 porte USB 3 e 2 porte USB anteriori. Le restanti due USB 3 non vanno mai mentre le 2 USB2 vanno in manira random. Che fare? Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626189 Share on other sites More sharing options...
gengik84 Posted July 17, 2018 Share Posted July 17, 2018 devi mettere come già stato detto la patch per port limit le immagini che hai postato a quando risalgono? Nel senso devi lasciare completamente a riposo e controllare power gadget, poi fare un test tipo geek bench controllare mentre il test è in atto, quando ha finito e dopo qualche minuto Se vuoi fai foto per ogni momento Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626211 Share on other sites More sharing options...
dugajimi Posted July 17, 2018 Author Share Posted July 17, 2018 (edited) Per quanto riguarda le USB confermo che avevo gia fatto la patch per port limit e posso dire che alcune volte le porte funzionano in altre no. Ad esempio ora funzionano tutte. Questi sono i risultati dei miei test con GeekBench: A riposo: inizio test GeekBench Durante test GeekBench Lavoro leggero (navigazione): Edited July 17, 2018 by dugajimi Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626226 Share on other sites More sharing options...
gengik84 Posted July 18, 2018 Share Posted July 18, 2018 posta la cartella clover e ioreg Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626309 Share on other sites More sharing options...
dugajimi Posted July 18, 2018 Author Share Posted July 18, 2018 Ecco Clover e IOREG: https://app.box.com/s/0t15n6u0qhpdx4q4moqedu7vx1pi56p4 Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626337 Share on other sites More sharing options...
gengik84 Posted July 18, 2018 Share Posted July 18, 2018 non hai modificato bene il config visto che usi ssdt devi rimuovere: APSN APLF PluginType Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626340 Share on other sites More sharing options...
dugajimi Posted July 18, 2018 Author Share Posted July 18, 2018 Ho rimosso la spunta ai tre parametri che mi indicati in precedenza e ho dovuto mettere la spunta a KernelPm sotto la voce kernel and kext Patches. Il risultato è questo: Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626345 Share on other sites More sharing options...
gengik84 Posted July 18, 2018 Share Posted July 18, 2018 come puoi ben vedere adesso è tutta un altra cosa e adesso va bene Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626347 Share on other sites More sharing options...
dugajimi Posted July 18, 2018 Author Share Posted July 18, 2018 Esatto ora va bene sotto questo punto di vista. Per le USB ancora non capisco: in questo momento vanno tutte e 8 ma a volte non vanno. Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626350 Share on other sites More sharing options...
gengik84 Posted July 18, 2018 Share Posted July 18, 2018 nella patch per il port limit metti AppleUSBXHCI al posto di com.apple.driver.AppleUSBXHCI Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626352 Share on other sites More sharing options...
dugajimi Posted July 18, 2018 Author Share Posted July 18, 2018 (edited) 10 minutes ago, gengik84 said: nella patch per il port limit metti AppleUSBXHCI al posto di com.apple.driver.AppleUSBXHCI Fatto e per ora pare funzioni. Un ulteriore cosa: controllando il config.plist risultano selezionati: dart=0 nvda_drv=1 Il sistema funziona benissimo ma mi pare che all'inizio non le avevo selezionate e andava bene uguale. Se non sbaglio questi parametri gestiscono la scheda grafica: Io in questo caso sto usando la NVidia GT740 e ho disabilitato da Bios la scheda integrata. Va bene così? Edited July 18, 2018 by dugajimi Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626355 Share on other sites More sharing options...
gengik84 Posted July 18, 2018 Share Posted July 18, 2018 dart=0 si usa nel caso non sia disattivatile VT-d sul bios... con la nvidia puoi rimuoverlo o comunque non crea problemi nvda_drv=1 serviva per far caricare i web driver nvidia..negli ultimi osx è deprecato e si usa "nvidiaWeb" sul config Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626357 Share on other sites More sharing options...
dugajimi Posted July 18, 2018 Author Share Posted July 18, 2018 Ho tolto dart=0 e riavviato e tutto ok Poi ho tolto nvda_drv=1 e spuntato nvidiaWeb e anche qui tutto bene. Segnalo però che non è stato istallato alcun webdriver visto che la scheda mi è stata riconosciuta nativamente. Va bene uguale? Link to comment https://www.insanelymac.com/forum/topic/334621-high-sierra-su-gigabyte-ga-z97-d3h-e-intel-i5-4690k/page/3/#findComment-2626361 Share on other sites More sharing options...
Recommended Posts