Pavo Posted May 28, 2018 Share Posted May 28, 2018 10 minutes ago, Teress said: So I deleted all my kexts in 10.12 and 10.13 folders and copied all your files to propper location. It booted. But my RAM is not recognized correctly and still have only 2 displays with content, one still black. I my old clover conf had the ram slots exact as it should. I have 96GB RAM, now it shows 48 and istats are going crazy. I also lost all my icloud, imessage etc. because of different settings. From Safari I can't even post a message to forum. Run the RunMe app again and upload the zip it creates Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615549 Share on other sites More sharing options...
Teress Posted May 28, 2018 Author Share Posted May 28, 2018 @Pavo First of all I have to thank you for your time and effort! You are very kind. New generated zip is here: https://files.fm/u/3a9qudpr BTW: I am missing also all sensors, like temperature sensor, cpu sensors etc. Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615553 Share on other sites More sharing options...
Pavo Posted May 28, 2018 Share Posted May 28, 2018 1 hour ago, Teress said: BTW: I am missing also all sensors, like temperature sensor, cpu sensors etc. Yeah I took them out on accident, added them back in this zip, again replace the entire folders in your Clover folder from the folders in this zip. Also Please do not make any changes to the config. Reboot and test and do another Runme and send up the zip it makes. Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615576 Share on other sites More sharing options...
Teress Posted May 28, 2018 Author Share Posted May 28, 2018 2 minutes ago, Pavo said: Yeah I took them out on accident, added them back in this zip, again replace the entire folders in your Clover folder from the folders in this zip. Also Please do not make any changes to the config. Reboot and test and do another Runme and send up the zip it makes. I don't see any new ZIP... Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615578 Share on other sites More sharing options...
Pavo Posted May 28, 2018 Share Posted May 28, 2018 1 minute ago, Teress said: I don't see any new ZIP... Opps lol my bad, here you go CLOVER.zip Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615579 Share on other sites More sharing options...
Teress Posted May 28, 2018 Author Share Posted May 28, 2018 (edited) 30 minutes ago, Pavo said: Opps lol my bad, here you go CLOVER.zip New generated ZIP is here: https://files.fm/u/5wn92yps All seems broken as before. Only two displays, only 48 GB RAM instead of 96, iStatMenus shows crazy memory numbers, no sensors for cpu etc. So I see no change. Edited May 28, 2018 by Teress Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615587 Share on other sites More sharing options...
Pavo Posted May 28, 2018 Share Posted May 28, 2018 6 minutes ago, Teress said: New generated ZIP is here: https://files.fm/u/5wn92yps Can you please delete the following from your Clover folder, reboot and rerun RunMe: Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615589 Share on other sites More sharing options...
Teress Posted May 28, 2018 Author Share Posted May 28, 2018 23 minutes ago, Pavo said: Can you please delete the following from your Clover folder, reboot and rerun RunMe: All I did. New ZIP: https://files.fm/u/3dpcb6te Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615595 Share on other sites More sharing options...
Pavo Posted May 28, 2018 Share Posted May 28, 2018 38 minutes ago, Teress said: All I did. New ZIP: https://files.fm/u/3dpcb6te Ok, everything is looking better now, are you still only getting 2x displays now? Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615597 Share on other sites More sharing options...
Teress Posted May 28, 2018 Author Share Posted May 28, 2018 (edited) 33 minutes ago, Pavo said: Ok, everything is looking better now, are you still only getting 2x displays now? Yes, physically I can see picture only on two displays, third is still black. But when I VNC to that machine, I can see all 3 desktops as it should be. Only two displays, only 48 GB RAM instead of 96, iStatMenus shows crazy memory numbers, no sensors for cpu etc. So I see no change. I am also missing my FireWire 400 ports. And now, when my displays went to sleep, I woke them up, filled in password and machine locks up. No response from keyb or mouse. Only seconds in watches in top right corner was increasing. Edited May 28, 2018 by Teress Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615599 Share on other sites More sharing options...
Pavo Posted May 28, 2018 Share Posted May 28, 2018 31 minutes ago, Teress said: Yes, physically I can see picture only on two displays, third is still black. But when I VNC to that machine, I can see all 3 desktops as it should be. Ok, try replacing these 2 files inside Clover>ACPI>patched, reboot and test Archive.zip Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615607 Share on other sites More sharing options...
Teress Posted May 28, 2018 Author Share Posted May 28, 2018 (edited) 8 minutes ago, Pavo said: Ok, try replacing these 2 files inside Clover>ACPI>patched, reboot and test Archive.zip I did at your command. All is the same, no change: Only two displays (VNC shows all 3), only 48 GB RAM instead of 96, iStatMenus shows crazy memory numbers, no sensors for cpu etc., no FireWire 400 ports, no iMessage, iCloud etc. Edited May 28, 2018 by Teress Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615608 Share on other sites More sharing options...
Pavo Posted May 28, 2018 Share Posted May 28, 2018 2 minutes ago, Teress said: I did at your command. All is the same, no change: Only two displays (VNC shows all 3), only 48 GB RAM instead of 96, iStatMenus shows crazy memory numbers, no sensors for cpu etc., no FireWire 400 ports, no iMessage, iCloud etc. Give me another RunMe please Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615609 Share on other sites More sharing options...
Teress Posted May 28, 2018 Author Share Posted May 28, 2018 (edited) 2 minutes ago, Pavo said: Give me another RunMe please OK, it is running already, it will take 10-15 minutes, as you know... I'm so sorry it's so complicated for you I really much appreciate your time and help! Edited May 28, 2018 by Teress Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615610 Share on other sites More sharing options...
Teress Posted May 28, 2018 Author Share Posted May 28, 2018 new ZIP is here: https://files.fm/u/7n2quspg Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615613 Share on other sites More sharing options...
Pavo Posted May 28, 2018 Share Posted May 28, 2018 6 minutes ago, Teress said: new ZIP is here: https://files.fm/u/7n2quspg Ok, This should work, place this file in Clover>ACPI>patched, reboot and test. If this does not work I am completely out of ideas. SSDT-GFX.aml Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615614 Share on other sites More sharing options...
Teress Posted May 28, 2018 Author Share Posted May 28, 2018 (edited) 9 minutes ago, Pavo said: Ok, This should work, place this file in Clover>ACPI>patched, reboot and test. If this does not work I am completely out of ideas. SSDT-GFX.aml Unfortunatelly sad to say, it is still the same Only two displays (VNC shows all 3), only 48 GB RAM instead of 96, iStatMenus shows crazy memory numbers, no sensors for cpu etc., no FireWire 400 ports, no iMessage, iCloud etc. At least I know, when you, the "Legend" are out of ideas, then my Hack is definatelly lost But once again, really thank you so much for your time, skills and effort you putted into help me. Edited May 28, 2018 by Teress Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615615 Share on other sites More sharing options...
Pavo Posted May 28, 2018 Share Posted May 28, 2018 1 minute ago, Teress said: Unfortunatelly sad to say, it is still the same Only two displays (VNC shows all 3), only 48 GB RAM instead of 96, iStatMenus shows crazy memory numbers, no sensors for cpu etc., no FireWire 400 ports, no iMessage, iCloud etc. At least I know, when you, the "Legend" are out of ideas, then my Hack is definatelly lost. Well I put your RAM settings back to what you had in your config. CPU sensors should be working. They are located in Clover>kexts>Other folder. iMessage and iCloud should work once you put your original information into the SMBIOS section that you XXX out in your config. For the 3rd monitor I honestly have no clue why its not working, try changing cable maybe. because its showing up in everything else that is working. Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615617 Share on other sites More sharing options...
Teress Posted May 28, 2018 Author Share Posted May 28, 2018 (edited) 8 minutes ago, Pavo said: Well I put your RAM settings back to what you had in your config. CPU sensors should be working. They are located in Clover>kexts>Other folder. iMessage and iCloud should work once you put your original information into the SMBIOS section that you XXX out in your config. For the 3rd monitor I honestly have no clue why its not working, try changing cable maybe. because its showing up in everything else that is working. Yes, I know iMessage etc. will work after I put back my orig. info to smsbios. But the rest is really not working. I have to delete all your work, copy back all my Clover files to have at least all my RAM, FireWire and sensors back. Do you have any info about yourself tested and 100% working motherboard for my setup? Maybe when I change the board it could help (this board is 100% healthy, but probably not so compatible). Or to change something in bios. Edited May 28, 2018 by Teress Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615618 Share on other sites More sharing options...
Pavo Posted May 28, 2018 Share Posted May 28, 2018 5 minutes ago, Teress said: Yes, I know iMessage etc. will work after I put back my orig. info to smsbios. But the rest is really not working. I have to delete all your work, copy back all my Clover files to have at least all my RAM, FireWire and sensors back. Do you have any info about yourself tested and 100% working motherboard for my setup? Maybe when I change the board it could help (this board is 100% healthy, but probably not so compatible). Or to change something in bios. Sorry I do not, thats a pretty old board. Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615619 Share on other sites More sharing options...
Pavo Posted May 28, 2018 Share Posted May 28, 2018 25 minutes ago, Teress said: Yes, I know iMessage etc. will work after I put back my orig. info to smsbios. But the rest is really not working. I have to delete all your work, copy back all my Clover files to have at least all my RAM, FireWire and sensors back. Do you have any info about yourself tested and 100% working motherboard for my setup? Maybe when I change the board it could help (this board is 100% healthy, but probably not so compatible). Or to change something in bios. One thing I did just think about, what is the Manufacture and model of your RX 560? Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615623 Share on other sites More sharing options...
Teress Posted May 29, 2018 Author Share Posted May 29, 2018 (edited) 12 hours ago, Pavo said: One thing I did just think about, what is the Manufacture and model of your RX 560? My RX560 is "MSI Rdeon RX 560 AERO ITX 4G OC", GDDR5, DL-DVI-D, HDMI, DP I had manually added my RAM info to config and it is displaying all 96GB RAM correctly now. Also deleted your FakeSMC and sensors and put back my old one, which has all sensors inside the package and my sensors are back. I also corrected my SMBIOS settings so iMessage and iCloud is working again. Edited May 29, 2018 by Teress Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615644 Share on other sites More sharing options...
Teress Posted May 29, 2018 Author Share Posted May 29, 2018 (edited) BTW I have also GTX 1030 which is alone running great. But when I add it side by side to RX 560 it can boot, then all 3 displays lit I see the login prompt and when I login, screens blink few times, for 2-3 seconds I can see desktop little dimmed and than it revert back to login screen with blurred background. (correct NVidia driver installed and in Clover selected). @Pavo Do you an idea why is this happening? Edited May 29, 2018 by Teress Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615651 Share on other sites More sharing options...
Pavo Posted May 29, 2018 Share Posted May 29, 2018 8 hours ago, Teress said: BTW I have also GTX 1030 which is alone running great. But when I add it side by side to RX 560 it can boot, then all 3 displays lit I see the login prompt and when I login, screens blink few times, for 2-3 seconds I can see desktop little dimmed and than it revert back to login screen with blurred background. (correct NVidia driver installed and in Clover selected). @Pavo Do you an idea why is this happening? I don't sorry. I don't think nvidia and amd play well together. I would try switching cables around or maybe try an active DVI to DP cable on the middle monitor and use DP on the left monitor. Are you sure you have a true DVI-D cable and not a DVI-I cable? You can tell just by looking at the cable, if less pins its a DVI-I cable Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615699 Share on other sites More sharing options...
Teress Posted May 29, 2018 Author Share Posted May 29, 2018 (edited) 22 minutes ago, Pavo said: I don't sorry. I don't think nvidia and amd play well together. I would try switching cables around or maybe try an active DVI to DP cable on the middle monitor and use DP on the left monitor. Are you sure you have a true DVI-D cable and not a DVI-I cable? You can tell just by looking at the cable, if less pins its a DVI-I cable Cable can't be a problem. I can drive any combination of 2 displays. Left + middle, left + right, middle + right Do you have any advice for the nvidia + amd? When displays comes up, it looks like all 3 are accelerated. I think I am close. Just to be able to log in. Edited May 29, 2018 by Teress Link to comment https://www.insanelymac.com/forum/topic/334212-rx560-10134-3-displays-two-ok-third-is-black/page/2/#findComment-2615705 Share on other sites More sharing options...
Recommended Posts