JavadEd Posted September 22, 2017 Share Posted September 22, 2017 hi, my specs are: ASRock h61m u3s3 8600gt! i5 3570 ivy bridge I tried different flags all of them stuck at first but this one goes until some point graphicsenabler=no -v -f and default clover flags it stuck at: service only ran for 0 seconds pushing respawn out by 10 seconds the time updates and some text flashes below this line quickly every couple of seconds Link to comment Share on other sites More sharing options...
JavadEd Posted September 22, 2017 Author Share Posted September 22, 2017 the last lines I see below this is sound assertion and the lines disapears quickly Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted September 22, 2017 Share Posted September 22, 2017 Could you make a video of it so that we can see the whole boot process? Link to comment Share on other sites More sharing options...
JavadEd Posted September 22, 2017 Author Share Posted September 22, 2017 Could you make a video of it so that we can see the whole boot process? here is video last line that flashes is sound assertion https://youtu.be/3fwhK3d5KZE Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted September 22, 2017 Share Posted September 22, 2017 Ah, I thought you were using Chameleon/Enoch.GraphicsEnabler=No/Yes does not exist within Clover. Use nv_disable=1 instead Link to comment Share on other sites More sharing options...
JavadEd Posted September 26, 2017 Author Share Posted September 26, 2017 Ah, I thought you were using Chameleon/Enoch. GraphicsEnabler=No/Yes does not exist within Clover. Use nv_disable=1 instead tnx the problem is still ther dart=0 nv_disable=1 -v -f stuck at sound assertion lines... adding -x cause restart at the beginning of the boot process! Link to comment Share on other sites More sharing options...
foskvs Posted September 27, 2017 Share Posted September 27, 2017 tnx the problem is still ther dart=0 nv_disable=1 -v -f stuck at sound assertion lines... adding -x cause restart at the beginning of the boot process! You have to disable the dedicated gpu. Link to comment Share on other sites More sharing options...
JavadEd Posted September 27, 2017 Author Share Posted September 27, 2017 You have to disable the dedicated gpu. tnx, I did this and booted with intel 2500 HD and got same error I also borrowed GTX 550 TI graphics card for any change! but I got sound assertion error I dont know what should I do Link to comment Share on other sites More sharing options...
burkett375 Posted September 27, 2017 Share Posted September 27, 2017 having same problem here Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted September 28, 2017 Share Posted September 28, 2017 tnx, I did this and booted with intel 2500 HD and got same error I also borrowed GTX 550 TI graphics card for any change! but I got sound assertion error I dont know what should I do Intel HD 2500 is not supported, so you'll need your dGPU. It's hard to say, since i can't read the text in your posted video. The "errors" you are mentioning in fact are not errors, but just notifications to the system. Post your EFI folder please. Link to comment Share on other sites More sharing options...
JavadEd Posted September 28, 2017 Author Share Posted September 28, 2017 Intel HD 2500 is not supported, so you'll need your dGPU. It's hard to say, since i can't read the text in your posted video. The "errors" you are mentioning in fact are not errors, but just notifications to the system. Post your EFI folder please. tnx The error after that line is: sound assertion at line 1054 and same error with different line number I have two graphics card now gtx 550 ti 8600 gt I can use each of them that macos needs! thanks again EFI.zip Link to comment Share on other sites More sharing options...
foskvs Posted September 28, 2017 Share Posted September 28, 2017 tnx The error after that line is: sound assertion at line 1054 and same error with different line number I have two graphics card now gtx 550 ti 8600 gt I can use each of them that macos needs! thanks again I had the same problem with my desktop and my laptop. The solution was to boot with only one gpu enabled. Disable your iGPU from your BIOS and plug only one graphics card (the gtx 550 ti should work OOB). Use google translate and take a look at here: http://www.insanelymac.com/forum/topic/327547-risolto-errore-installazione-comapplexpclaunchd1/ 1 Link to comment Share on other sites More sharing options...
JavadEd Posted September 28, 2017 Author Share Posted September 28, 2017 I had the same problem with my desktop and my laptop. The solution was to boot with only one gpu enabled. Disable your iGPU from your BIOS and plug only one graphics card (the gtx 550 ti should work OOB). Use google translate and take a look at here: http://www.insanelymac.com/forum/topic/327547-risolto-errore-installazione-comapplexpclaunchd1/ tnx integerated gpu is disabled. I extracted dsdt and ssdt's and decompile them to dsl files but I can not find anything related to graphics card in ssdt's no gfx peg and... I attached the dsl and aml files, can you give hint to disable the graphics card from ssdt tnx a lot pat.zip Link to comment Share on other sites More sharing options...
foskvs Posted September 29, 2017 Share Posted September 29, 2017 tnx integerated gpu is disabled. I extracted dsdt and ssdt's and decompile them to dsl files but I can not find anything related to graphics card in ssdt's no gfx peg and... I attached the dsl and aml files, can you give hint to disable the graphics card from ssdt tnx a lot If you're on desktop, you just need to disable the igpu from bios and then boot from the 550 ti. Post your clover folder. Link to comment Share on other sites More sharing options...
JavadEd Posted September 29, 2017 Author Share Posted September 29, 2017 If you're on desktop, you just need to disable the igpu from bios and then boot from the 550 ti. Post your clover folder. I'm on desktop، I attach efi folder just a few posts ago Link to comment Share on other sites More sharing options...
foskvs Posted September 29, 2017 Share Posted September 29, 2017 I'm on desktop، I attach efi folder just a few posts ago ACPI/origin folder is empty. When you reach clover gui, press F4 a couple of times. Wait a few seconds and then boot into macOS. Then attach your ACPI folder. 1 Link to comment Share on other sites More sharing options...
JavadEd Posted October 2, 2017 Author Share Posted October 2, 2017 ACPI/origin folder is empty. When you reach clover gui, press F4 a couple of times. Wait a few seconds and then boot into macOS. Then attach your ACPI folder. sorry for the delay! I did it and attach the efi folder tnx again EFI.zip Link to comment Share on other sites More sharing options...
foskvs Posted October 3, 2017 Share Posted October 3, 2017 sorry for the delay! I did it and attach the efi folder tnx again If booting with only the gtx 550 ti enabled does not solve the issue, try to unplug that and use the other discrete graphics card. Link to comment Share on other sites More sharing options...
Recommended Posts