When I Attempt to wake my Machine from sleep, the screen stays black, although the computer is obviously awake !
This Machine has a 1300W Power Supply So Sleep is Very Useful.
1) FIX_WAK and FixShutdown as per Clover Wiki.
2) Although I am using "SAPPHIRE Radeon PULSE RX 580 8GB GDDR5", which Should be completely Supported by Mojave, I Also changed the Part Number to "113-4E353BU-O4E" as per this Guide: http://www.xlr8yourmac.com/archives/feb18/RadeonRX-580_MacPro.html. The GPU is working GREAT without even Clover Inject
3) Tried to Run this command: disablehibernate.command.zip
4) Tried darkwake=0 to 10
5) Disabled wake on USB & Wake on LAN (BIOS)
sudo pmset -g
System-wide power settings:
Currently in use:
Sleep On Power Button 1
pmset -g assertions
2019-02-19 18:51:04 +0200
Assertion status system-wide:
Listed by owning process:
pid 56(powerd): [0x0000001700088000] 00:13:44 ExternalMedia named: "com.apple.powermanagement.externalmediamounted"
pid 100(hidd): [0x00000025000980a7] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968578.17"
Timeout will fire in 600 secs Action=TimeoutActionRelease
pid 200(mds_stores): [0x0000034e000b8279] 00:00:00 BackgroundTask named: "com.apple.metadata.mds_stores.power"
Kernel Assertions: 0x4=USB
id=502 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d130000 owner=USB Keyboard
id=503 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d120000 owner=Lenovo Optical Mouse
Idle sleep preventers: IODisplayWrangler
CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors
RAM: 128 GB 1333 MHz DDR3 ECC Memory
GPU: SAPPHIRE Radeon PULSE RX 580 8GB GDDR5
Chipset: Intel C602
Audio: Realtek ALC3220 (ALC280) High Definition Audio
SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4
Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
Network Controller 2: Intel Ethernet Controller I210
NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
alla fine sono riuscito a risolvere il problema che riscontravo qualche mese fa, dopo l'ottima EFI sistemata da @gengik84 e l'ho risolto rimuovendo dart=0 che creava kernel panic e problemi quando la batteria scendeva sotto ad un livello di batteria basso. Adesso il sistema non crea più problemi di kernel panic, ma volevo chiedervi se allo stato attuale secondo voi c'è qualcos'altro da ottimizzare.
So after a gazillion tries with High Sierra, i gave up and decided to try Mojave. I had nothing to lose, afterall.
I started from scratch. I reformatted my thumb drive. Made it bootable from the Mojave [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Booted with it. Selected my language. It installed a little bit. Rebooted. I Booted from the SSD. Installed a bit more. Rebooted. I Booted from the SSD again and it finished the installation.
I went through the basic setup and got to the desktop. I ran [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and selected my options and "built" it.
Thinking i was a-ok, i decided to reboot, just to make sure all was well.
After about 1min, i lose display.
I thought i had messed something up in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], so i decided to go back to my mac mini, redo the thumb drive all over again.
I go to boot from the thumb drive and when i get to the language selection screen, i lose all USB usage, so i cant even get in to wipe the SSD and start over. So, Mojave is still on the SSD, but i cant get to it because i lose display.
Im attaching a screenshot of Verbose mode right before i lose display.
I would greatly appreciate any help to get back into it or at least help getting it re-installed!!