kylon Posted March 6, 2016 Share Posted March 6, 2016 Hi, the laptop is Acer Aspire V5-571PG i5 os x 10.11.3 This is the first hack in this pc and i cannot find a working appleHDA or patch for this. codec id: 0x10EC0269 revision: 0x0100 audio device: 0x80861E20 sub device: 0x1025072D layout-id: 01 00 00 00 thanks Link to comment Share on other sites More sharing options...
gengik84 Posted March 6, 2016 Share Posted March 6, 2016 Try AppleHda Patcher 2 Link to comment Share on other sites More sharing options...
kylon Posted March 6, 2016 Author Share Posted March 6, 2016 It uses a wrong layout id and it does not work on any of my devices Link to comment Share on other sites More sharing options...
gengik84 Posted March 6, 2016 Share Posted March 6, 2016 For this codec, there are many versions. Have you tried everything? Also if you have installed S/L/E must disable SIP partially, to allow loading of unsigned kext For laptop, layout id is 3 1 Link to comment Share on other sites More sharing options...
kylon Posted March 6, 2016 Author Share Posted March 6, 2016 i added 0x67 to csr in clover config, it should be disabled, at least on my pc i can load xtrafinder which does not work with sip i tried appleHDA patcher 269vc2, 269vc3 and yosemite appleHDA 269vc, 269vc2 ioreg says layout id 1 Link to comment Share on other sites More sharing options...
gengik84 Posted March 6, 2016 Share Posted March 6, 2016 layout should be 3 to put on dsdt, or config.plist Link to comment Share on other sites More sharing options...
kylon Posted March 6, 2016 Author Share Posted March 6, 2016 which kext should i use? i tried 1, 3, 12 and 28 i ll try again, but which kext? Link to comment Share on other sites More sharing options...
gengik84 Posted March 6, 2016 Share Posted March 6, 2016 The instructions from the app, clearly indicate to use 3 layout. You have to try the first version available for your codec. After each test, cancel Mirone folder from the desktop. repeat the procedure by selecting the next version Test them one at a time, with this layout Link to comment Share on other sites More sharing options...
kylon Posted March 6, 2016 Author Share Posted March 6, 2016 layout 3 ver 1, ver 2 and ver 3. none of them work i m using the full patched kext in s/l/e Link to comment Share on other sites More sharing options...
Micky1979 Posted March 6, 2016 Share Posted March 6, 2016 It uses a wrong layout id and it does not work on any of my devices Sir, is you that use the wrong layout-id An hackintosh does not inject this property, so you have it somewere (DSDT, SSST,HDAEnabler.kext.. or any other injector you have installed) layout 3 ver 1, ver 2 and ver 3. none of them work i m using the full patched kext in s/l/e Was already patched? layout-id 1 mentioned by you indicate that you use someone else work before. BTW you apply the HPET patch to your dsdt? 1 Link to comment Share on other sites More sharing options...
gengik84 Posted March 6, 2016 Share Posted March 6, 2016 Post clean dsdt. Press F4 to clover's Gui, start osx go to EFI/Clover/acpi compress and post the entire origin folder For this procedure, it is essential that clover has been installed in the ESP 1 Link to comment Share on other sites More sharing options...
kylon Posted March 6, 2016 Author Share Posted March 6, 2016 yea, sorry layout 1 was set in clover, now it s 3 i m already using a dsdt, i extracted everything in linux and i patched almost everything to make it to work, but no, i did not patch the hpet i ll path it and try again Link to comment Share on other sites More sharing options...
Micky1979 Posted March 6, 2016 Share Posted March 6, 2016 i did not patch the hpet for a laptop is needed 1 Link to comment Share on other sites More sharing options...
kylon Posted March 6, 2016 Author Share Posted March 6, 2016 Do i also need the irq fix? Link to comment Share on other sites More sharing options...
gengik84 Posted March 6, 2016 Share Posted March 6, 2016 Do i also need the irq fix? 1 Link to comment Share on other sites More sharing options...
kylon Posted March 6, 2016 Author Share Posted March 6, 2016 nothing # Fix IRQs into device name_hid PNP0000 code_regex IRQNoFlags\s\(\)\n\s+\{(\d+)\} remove_matched; into device name_hid PNP0100 code_regex IRQNoFlags\s\(\)\n\s+\{(\d+)\} remove_matched; into device name_hid PNP0B00 code_regex IRQNoFlags\s\(\)\n\s+\{(\d+)\} remove_matched; into device name_hid PNP0103 code_regex IRQNoFlags\s\(\)\n\s+\{(\d+)\} removeall_matched; # Fix HPET into device name_hid PNP0103 code_regex IRQNoFlags\s\(\)\s+\{\d+\} removeall_matched; into device name_hid PNP0103 code_regex_not IRQNoFlags code_regex Name\s\(([^,]+),\sResourceTemplate\s\(\)\n\s+\{((?:.|\n)*)\}\) replace_matched begin Name (%1, ResourceTemplate ()\n{\n IRQNoFlags () {0}\n IRQNoFlags () {8}\n IRQNoFlags () {11}\n IRQNoFlags () {15}\n%2}) end; into method label _DSM parent_label HDEF remove_entry; into device label HDEF insert begin Method (_DSM, 4, NotSerialized)\n {\n If (LEqual (Arg2, Zero))\n {\n Return (Buffer (One)\n {\n 0x03\n })\n }\n Return (Package (0x0C)\n {\n "AAPL,slot-name", Buffer (0x09) { "Built in" },\n "layout-id", Buffer (0x04) { 0x03, 0x00, 0x00, 0x00 },\n "device_type", Buffer (0x11) { "Audio Controller" },\n "built-in", Buffer (One) { 0x00 },\n "PinConfigurations", Buffer (Zero) {},\n "hda-gfx", Buffer (0x0A) { "onboard-1" }\n })\n } end; EDIT: Found it, from yosemite applehda threadI don t know why but mirone audio never worked for me in any pcThanks for the help Link to comment Share on other sites More sharing options...
gengik84 Posted March 6, 2016 Share Posted March 6, 2016 I thought ... Before you try, you had to install VoodooHDA? Link to comment Share on other sites More sharing options...
kylon Posted March 6, 2016 Author Share Posted March 6, 2016 I installed voodoo just to be sure that my card could work I uninstalled it and now using patched hda Link to comment Share on other sites More sharing options...
gengik84 Posted March 6, 2016 Share Posted March 6, 2016 Sicuro di aver accuratemente disinstallato ? non vorrei ,tu avessi un HDAdisabler in S/L/E Link to comment Share on other sites More sharing options...
kylon Posted March 6, 2016 Author Share Posted March 6, 2016 Si si, voodoo enabler e applehda disabler li ho cancellati L audio ora mi funziona L unica cosa e che nn so come togliere il pannello dalle impostazioni Link to comment Share on other sites More sharing options...
gengik84 Posted March 6, 2016 Share Posted March 6, 2016 delete VoodooHDA.prefPane in System/Library/PreferencePanes 1 Link to comment Share on other sites More sharing options...
Recommended Posts