maleorderbride Posted December 26, 2015 Share Posted December 26, 2015 Today I will try a Gigabyte Radeon R9 390 Gaming G1 instead of Asus GT740. Hope it´s working better.. Cross your fingers! How did it go? Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2200661 Share on other sites More sharing options...
analogo Posted December 27, 2015 Author Share Posted December 27, 2015 How did it go? It was not possible, the Radeon R9 390 to get working in accelerated mode and returned the card. Bought a MSI GTX960 Gaming 4G, but the same problem as with the GT740, even with adapted DSDT and SSDTs. With nv_disable=1 almost working smoothly and with nvda_drv=1 unresponsive and laggy like hell.. Then I tried some other kexts and BIOS settings. Now I´m reading one more time some threads (one of them with over 80 pages) about Asus Z9PE-D8 WS / Z10PE-D8 WS, C610 / C612 / X99, etc. in another large forum. Finally I hope to find the ultimate solution or someone can help me.. Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2200778 Share on other sites More sharing options...
Codinger Posted December 27, 2015 Share Posted December 27, 2015 It was not possible, the Radeon R9 390 to get working in accelerated mode and returned the card. Bought a MSI GTX960 Gaming 4G, but the same problem as with the GT740, even with adapted DSDT and SSDTs. With nv_disable=1 almost working smoothly and with nvda_drv=1 unresponsive and laggy like hell.. Then I tried some other kexts and BIOS settings. Now I´m reading one more time some threads (one of them with over 80 pages) about Asus Z9PE-D8 WS / Z10PE-D8 WS, C610 / C612 / X99, etc. in another large forum. Finally I hope to find the ultimate solution or someone can help me.. Thats not good Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2200785 Share on other sites More sharing options...
analogo Posted December 27, 2015 Author Share Posted December 27, 2015 Thats not good Unfortunately, yes, but I will not give up.. Do you have tips, what I can try? Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2200789 Share on other sites More sharing options...
maleorderbride Posted December 27, 2015 Share Posted December 27, 2015 It was not possible, the Radeon R9 390 to get working in accelerated mode and returned the card. Bought a MSI GTX960 Gaming 4G, but the same problem as with the GT740, even with adapted DSDT and SSDTs. With nv_disable=1 almost working smoothly and with nvda_drv=1 unresponsive and laggy like hell.. Then I tried some other kexts and BIOS settings. Now I´m reading one more time some threads (one of them with over 80 pages) about Asus Z9PE-D8 WS / Z10PE-D8 WS, C610 / C612 / X99, etc. in another large forum. Finally I hope to find the ultimate solution or someone can help me.. What happens with a single CPU installed? Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2200947 Share on other sites More sharing options...
analogo Posted December 29, 2015 Author Share Posted December 29, 2015 What happens with a single CPU installed? I tried it with cpus=1 but without success.. Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2201378 Share on other sites More sharing options...
maleorderbride Posted December 29, 2015 Share Posted December 29, 2015 No, I literally mean a single CPU installed. Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2201385 Share on other sites More sharing options...
analogo Posted December 29, 2015 Author Share Posted December 29, 2015 No, I literally mean a single CPU installed. Thank you for your tip, but I'm just too exhausted after the week-long search for the problem to develop a CPU and then install again. Maybe in the near future, or is it possible to deactivate one of the CPUs? Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2201390 Share on other sites More sharing options...
analogo Posted January 5, 2016 Author Share Posted January 5, 2016 Yesterday I've ordered a X10DAi, because Supermicro is supposed to offer the most compatible mainboards for a dual CPU Hackintosh. Hope it works smoothly.. Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2202979 Share on other sites More sharing options...
Codinger Posted January 10, 2016 Share Posted January 10, 2016 Yesterday I've ordered a X10DAi, because Supermicro is supposed to offer the most compatible mainboards for a dual CPU Hackintosh. Hope it works smoothly.. Why the Heck you are using 2 CPUs? Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2204996 Share on other sites More sharing options...
analogo Posted January 10, 2016 Author Share Posted January 10, 2016 Why the Heck you are using 2 CPUs? Because I need much CPU power for my music sequencers.. Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2204998 Share on other sites More sharing options...
Codinger Posted January 10, 2016 Share Posted January 10, 2016 Because I need much CPU power for my music sequencers.. Cool Stuff. Wich CPUs are u using Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2205002 Share on other sites More sharing options...
analogo Posted January 10, 2016 Author Share Posted January 10, 2016 Cool Stuff. Wich CPUs are u using Hehe.. Two Xeon E5-2680 v3 CPUs.. Do you have an idea, what I can try? __________________ Edit: Geekbench (32bit).. http://browser.primatelabs.com/geekbench3/4807738 Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2205009 Share on other sites More sharing options...
Codinger Posted January 10, 2016 Share Posted January 10, 2016 Hehe.. Two Xeon E5-2680 v3 CPUs.. Do you have an idea, what I can try? __________________ Edit: Geekbench (32bit).. GeekBench.png http://browser.primatelabs.com/geekbench3/4807738 Wtf my score is about 15k Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2205081 Share on other sites More sharing options...
DonDonnelly Posted January 10, 2016 Share Posted January 10, 2016 I'm currently struggling through a similar build on a SM X10DRG-Q. It gives me hope that you've been able to boot, I haven't been able to get past PCI Configuration Begin. I was under the impression that El Cap still had the 32 thread cap, is that not the case anymore? If so, I'll be very excited to use all 56 threads on mine once it's finally up and running. Have you tried running it with HT disabled? Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2205126 Share on other sites More sharing options...
analogo Posted January 10, 2016 Author Share Posted January 10, 2016 Wtf my score is about 15k Yeah, but not working smoothly.. I'm currently struggling through a similar build on a SM X10DRG-Q. It gives me hope that you've been able to boot, I haven't been able to get past PCI Configuration Begin. I was under the impression that El Cap still had the 32 thread cap, is that not the case anymore? If so, I'll be very excited to use all 56 threads on mine once it's finally up and running. Have you tried running it with HT disabled? Wow, 56 threads.. Probably now can be used more than 32 threads.. Yes, I tried 2x 12 core without HT, but the same problem.. Can you post your configuration, like BIOS settings, config.plist and used kexts? Maybe I can help you to get your monster working.. Edit: And your hardware components.. Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2205228 Share on other sites More sharing options...
DonDonnelly Posted January 12, 2016 Share Posted January 12, 2016 Analogo, my basic config is as follows: HW: Supermicro Superserver 7048 GRTR X10DRG-Q Mobo 2x Xeon E5-2697v3 4x 32GB Samsung DDR4 2133mhz DIMMS 1x PNY GTX 960 3x PNY GTX 980ti Samsung 850 Pro 512GB SSD Blackmagic Decklink 4k Pro Atto R680 8x Hitachi Ultrastar 3TB BIOS: HT off VT-d off Onboard GFX Disabled (Jumper) CSM Disabled USB 3 off XHCI diasbled OS: 10.11.2 Clover v2r3330 w/ attached config.plist Drivers: CsmVideoDxe-64.efi DataHubDxe-64.efi FSInject-64.efi OsxAptioFixDrv-64.efi OsxFatBinaryDrv-64.efi PartitionDxe-64.efi VBoxHfs-64.efi Kext: FakeSMC 6.14 NullCPUPowerManagement VoodooTSCSync I've gone through just about every iteration of BIOS options, kexts, boot flags, kernel patches, etc. Installer USB and vanilla drive built from an external system reboot at 3rd [PCI Configuration Begin]. I've attached my ACPI tables as well in case that helps. config.plist.zip origin.zip Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2205683 Share on other sites More sharing options...
analogo Posted January 12, 2016 Author Share Posted January 12, 2016 @Seandonnelly Thank you.. I´m still testing without a break to get a smoothly working system and will not be at home for about four weeks, beginning from tomorrow. Maybe I'll be able to write a guide in a new thread before. Otherwise hopefully in February.. Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2205892 Share on other sites More sharing options...
DonDonnelly Posted January 15, 2016 Share Posted January 15, 2016 Thanks, I appreciate it. I'll reply here if I find anything new before then. Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2206918 Share on other sites More sharing options...
Kuleone Posted September 14, 2016 Share Posted September 14, 2016 Hi Analogo, I currently have : • ASUS Z10PE-D16 WS • 2x XEON E5-2680 v3 • 64 gig ram • EVGA GTX 760 SC • Lastest ver Clover • El Capitan 10.11.6 I am able to boot into EL Capitan but I have the following issues, I cannot get the NVIDIA drivers to work(Working ok with default drivers), if I set the profile to Mac Pro6,1 it knocks out my display when I boot into the OS. I can hear sound but no display. Lastly, not all USB ports are working but my USB 3.0 are working. I have a recording studio and so far Logic X Pro, Cubase 8.5, Studio One 3.3 and Pro Tools 12.5.2 is working with no issues. Hyper-Threading stops my network port from working. Maybe we can go over some of the BIOS setting to fix the problem? Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2278453 Share on other sites More sharing options...
DonDonnelly Posted September 19, 2016 Share Posted September 19, 2016 If you have sound but no display it is likely the AGDP fix needed for the 6,1 SMBIOS that is well documented elsewhere on this forum. I can only boot with nv_disable=1 as well, however my issue seems to be different as I just get a reset as soon as 2nd stage boot starts. As far as USB I have had similar issues, which seemed to go away after playing with the XHCI BIOS settings. Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2280465 Share on other sites More sharing options...
Kuleone Posted October 4, 2016 Share Posted October 4, 2016 My system update, So I got almost everything to work. The Nvidia drivers are finally working, the Mac 6,1 SMBIOS finally loaded with the AGDP fix but still not displaying my hardware correctly in "About this Mac". Booting is OK considering I have an Intel SSD as my boot drive. I also tried turning on several settings in the BIOS which seems to work. The following settings still allowed me to Boot with no issues. VT-d=On USB 3=On (I have two ports not working) XHCI=On HT still knocks out the network ports and the Nvidia drivers. Otherwise everything running smoothly, again I'm using my system for my Recording Studio and some Video editing and all my programs are working. I'm still doing some minor tweaking to get better Geekbench results. I will post my results in a few days. If anyone needs help let me know. I will try and post a tutorial on how I did my setup. 2 Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2292915 Share on other sites More sharing options...
Balamut Posted October 4, 2016 Share Posted October 4, 2016 Hi Analogo,I currently have : • ASUS Z10PE-D16 WS• 2x XEON E5-2680 v3• 64 gig ram• EVGA GTX 760 SC• Lastest ver Clover • El Capitan 10.11.6I am able to boot into EL Capitan but I have the following issues, I cannot get the NVIDIA drivers to work(Working ok with default drivers), if I set the profile to Mac Pro6,1 it knocks out my display when I boot into the OS. I can hear sound but no display. Lastly, not all USB ports are working but my USB 3.0 are working. I have a recording studio and so far Logic X Pro, Cubase 8.5, Studio One 3.3 and Pro Tools 12.5.2 is working with no issues. Hyper-Threading stops my network port from working.Maybe we can go over some of the BIOS setting to fix the problem? How many sticks of memory? All cpus with hyper threading detected? Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2292934 Share on other sites More sharing options...
Kuleone Posted October 5, 2016 Share Posted October 5, 2016 How many sticks of memory? All cpus with hyper threading detected? I have 4 16 gig Samsung 2133 DDR4 2133 Yes all are detected, I can boot with Hypertheading on but no network working and sometimes it causes some weird things with Logic Pro. I can see all cores in Logic. Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2293351 Share on other sites More sharing options...
DonDonnelly Posted October 5, 2016 Share Posted October 5, 2016 Congrats Kuleone, very inspiring you've gotten this far! I'm working on a c612 build as well, and have been stuck at the nVidia drivers for a while. Was HT the culprit in preventing them from loading? Link to comment https://www.insanelymac.com/forum/topic/309899-asus-z10pe-d8-ws-%E2%80%A2-2x-xeon-e5-2680-v3-%E2%80%A2-clover-%E2%80%A2-el-capitan-%E2%80%A2-system-lags-freezes/page/2/#findComment-2293366 Share on other sites More sharing options...
Recommended Posts