Rafeh Posted March 24, 2015 Share Posted March 24, 2015 i extracted dsdt and it shows 189 errors, 0 warnings and 1518 optimizations, can someone please fix it for me, specs of laptop are, Core i5 520M Intel HD 1st gen DDR3 dsdt.zip Link to comment Share on other sites More sharing options...
artur_pt Posted March 24, 2015 Share Posted March 24, 2015 hello no errors and no patches DSDT.aml.zip good hack 1 Link to comment Share on other sites More sharing options...
Rafeh Posted March 25, 2015 Author Share Posted March 25, 2015 Thanks for the dsdt it works but unfortunately no acceleration for my intel hd graphics 1st gen, tried everything, followed the tutorial on this site but no luck. Link to comment Share on other sites More sharing options...
artur_pt Posted March 25, 2015 Share Posted March 25, 2015 hello like i write .. only no errors .. none patch is apply the first gen graphics .. is one the best guides i know.. make sure u read it carefully good hack 1 Link to comment Share on other sites More sharing options...
Rafeh Posted March 25, 2015 Author Share Posted March 25, 2015 Yes i read carefully, I had lvds connector which is supported with full acceleration, i dumped code from linux and apply patch manually on framebuffer kext still no acceleration, This is the code i get from linux, btw i am using mavericks.Anyways Thanks for your help PGETBL_CTL: 0x00000008 GEN6_INSTDONE_1: 0xfffffffe GEN6_INSTDONE_2: 0xffffffff CPU_VGACNTRL: 0x80000000 (disabled) DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000 RR_HW_CTL: 0x00000000 (low 0, high 0) FDI_PLL_BIOS_0: 0x082b3019 FDI_PLL_BIOS_1: 0x00000000 FDI_PLL_BIOS_2: 0x00000000 DISPLAY_PORT_PLL_BIOS_0: 0x0807012b DISPLAY_PORT_PLL_BIOS_1: 0x00000000 DISPLAY_PORT_PLL_BIOS_2: 0x00000000 FDI_PLL_FREQ_CTL: 0x00053687 PIPEACONF: 0xc0000050 (enabled, active, pf-pd, rotate 0, 6bpc) HTOTAL_A: 0x05f50555 (1366 active, 1526 total) HBLANK_A: 0x05f50555 (1366 start, 1526 end) HSYNC_A: 0x05a50585 (1414 start, 1446 end) VTOTAL_A: 0x031502ff (768 active, 790 total) VBLANK_A: 0x031502ff (768 start, 790 end) VSYNC_A: 0x03070302 (771 start, 776 end) VSYNCSHIFT_A: 0x00000000 PIPEASRC: 0x055502ff (1366, 768) PIPEA_DATA_M1: 0x7e26ad65 (TU 64, val 0x26ad65 2534757) PIPEA_DATA_N1: 0x00400000 (val 0x400000 4194304) PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0) PIPEA_DATA_N2: 0x00000000 (val 0x0 0) PIPEA_LINK_M1: 0x00022613 (val 0x22613 140819) PIPEA_LINK_N1: 0x00080000 (val 0x80000 524288) PIPEA_LINK_M2: 0x00000000 (val 0x0 0) PIPEA_LINK_N2: 0x00000000 (val 0x0 0) DSPACNTR: 0xd8004400 (enabled) DSPABASE: 0x00000000 DSPASTRIDE: 0x00001600 (88) DSPASURF: 0x02501000 DSPATILEOFF: 0x00000000 (0, 0) PIPEBCONF: 0x00000000 (disabled, inactive, pf-pd, rotate 0, 8bpc) HTOTAL_B: 0x00000000 (1 active, 1 total) HBLANK_B: 0x00000000 (1 start, 1 end) HSYNC_B: 0x00000000 (1 start, 1 end) VTOTAL_B: 0x00000000 (1 active, 1 total) VBLANK_B: 0x00000000 (1 start, 1 end) VSYNC_B: 0x00000000 (1 start, 1 end) VSYNCSHIFT_B: 0x00000000 PIPEBSRC: 0x00000000 (1, 1) PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0) PIPEB_DATA_N1: 0x00000000 (val 0x0 0) PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0) PIPEB_DATA_N2: 0x00000000 (val 0x0 0) PIPEB_LINK_M1: 0x00000000 (val 0x0 0) PIPEB_LINK_N1: 0x00000000 (val 0x0 0) PIPEB_LINK_M2: 0x00000000 (val 0x0 0) PIPEB_LINK_N2: 0x00000000 (val 0x0 0) DSPBCNTR: 0x00004000 (disabled) DSPBBASE: 0x00000000 DSPBSTRIDE: 0x00000000 (0) DSPBSURF: 0x00000000 DSPBTILEOFF: 0x00000000 (0, 0) PIPECCONF: 0x00000000 (disabled, inactive, pf-pd, rotate 0, 8bpc) HTOTAL_C: 0x00000000 (1 active, 1 total) HBLANK_C: 0x00000000 (1 start, 1 end) HSYNC_C: 0x00000000 (1 start, 1 end) VTOTAL_C: 0x00000000 (1 active, 1 total) VBLANK_C: 0x00000000 (1 start, 1 end) VSYNC_C: 0x00000000 (1 start, 1 end) VSYNCSHIFT_C: 0x00000000 PIPECSRC: 0x00000000 (1, 1) PIPEC_DATA_M1: 0x00000000 (TU 1, val 0x0 0) PIPEC_DATA_N1: 0x00000000 (val 0x0 0) PIPEC_DATA_M2: 0x00000000 (TU 1, val 0x0 0) PIPEC_DATA_N2: 0x00000000 (val 0x0 0) PIPEC_LINK_M1: 0x00000000 (val 0x0 0) PIPEC_LINK_N1: 0x00000000 (val 0x0 0) PIPEC_LINK_M2: 0x00000000 (val 0x0 0) PIPEC_LINK_N2: 0x00000000 (val 0x0 0) DSPCCNTR: 0x00000000 (disabled) DSPCBASE: 0x00000000 DSPCSTRIDE: 0x00000000 (0) DSPCSURF: 0x00000000 DSPCTILEOFF: 0x00000000 (0, 0) PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1) PFA_CTL_2: 0x00007e80 (vscale 0.988281) PFA_CTL_3: 0x00003f40 (vscale initial phase 0.494141) PFA_CTL_4: 0x00007d54 (hscale 0.979126) PFA_WIN_POS: 0x00000000 (0, 0) PFA_WIN_SIZE: 0x00000000 (0, 0) PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1) PFB_CTL_2: 0x00000000 (vscale 0.000000) PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000) PFB_CTL_4: 0x00000000 (hscale 0.000000) PFB_WIN_POS: 0x00000000 (0, 0) PFB_WIN_SIZE: 0x00000000 (0, 0) PFC_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1) PFC_CTL_2: 0x00000000 (vscale 0.000000) PFC_CTL_3: 0x00000000 (vscale initial phase 0.000000) PFC_CTL_4: 0x00000000 (hscale 0.000000) PFC_WIN_POS: 0x00000000 (0, 0) PFC_WIN_SIZE: 0x00000000 (0, 0) PCH_DREF_CONTROL: 0x00001400 (cpu source disable, ssc_source enable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 disable, ssc4 disable) PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125) PCH_DPLL_TMR_CFG: 0x0271186a PCH_SSC4_PARMS: 0x00000000 PCH_SSC4_AUX_PARMS: 0x00000000 PCH_DPLL_SEL: 0x00000000 (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125) PCH_DPLL_ANALOG_CTL: 0x00008000 PCH_DPLL_A: 0x88046004 (enable, sdvo high speed no, mode LVDS, p2 Div 14, FPA0 P1 3, FPA1 P1 3, refclk SSC, sdvo/hdmi mul 1) PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1) PCH_FPA0: 0x00021105 (n = 2, m1 = 17, m2 = 5) PCH_FPA1: 0x00021105 (n = 2, m1 = 17, m2 = 5) PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7) PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7) TRANS_HTOTAL_A: 0x05f50555 (1366 active, 1526 total) TRANS_HBLANK_A: 0x05f50555 (1366 start, 1526 end) TRANS_HSYNC_A: 0x05a50585 (1414 start, 1446 end) TRANS_VTOTAL_A: 0x031502ff (768 active, 790 total) TRANS_VBLANK_A: 0x031502ff (768 start, 790 end) TRANS_VSYNC_A: 0x03070302 (771 start, 776 end) TRANS_VSYNCSHIFT_A: 0x00000000 TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0) TRANSA_DATA_N1: 0x00000000 (val 0x0 0) TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0) TRANSA_DATA_N2: 0x00000000 (val 0x0 0) TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0) TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0) TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0) TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0) TRANS_HTOTAL_B: 0x00000000 (1 active, 1 total) TRANS_HBLANK_B: 0x00000000 (1 start, 1 end) TRANS_HSYNC_B: 0x00000000 (1 start, 1 end) TRANS_VTOTAL_B: 0x00000000 (1 active, 1 total) TRANS_VBLANK_B: 0x00000000 (1 start, 1 end) TRANS_VSYNC_B: 0x00000000 (1 start, 1 end) TRANS_VSYNCSHIFT_B: 0x00000000 TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0) TRANSB_DATA_N1: 0x00000000 (val 0x0 0) TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0) TRANSB_DATA_N2: 0x00000000 (val 0x0 0) TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0) TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0) TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0) TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0) TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total) TRANS_HBLANK_C: 0x00000000 (1 start, 1 end) TRANS_HSYNC_C: 0x00000000 (1 start, 1 end) TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total) TRANS_VBLANK_C: 0x00000044 (69 start, 1 end) TRANS_VSYNC_C: 0x00000000 (1 start, 1 end) TRANS_VSYNCSHIFT_C: 0x00000000 TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0) TRANSC_DATA_N1: 0x00000000 (val 0x0 0) TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0) TRANSC_DATA_N2: 0x00000000 (val 0x0 0) TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0) TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0) TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0) TRANSC_DP_LINK_N2: 0x00ffffff (val 0xffffff 16777215) TRANSACONF: 0xc0000040 (enable, active, progressive) TRANSBCONF: 0x00000000 (disable, inactive, progressive) TRANSCCONF: 0x00000000 (disable, inactive, progressive) FDI_TXA_CTL: 0xb0044000 (enable, train pattern not train, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable) FDI_TXB_CTL: 0x00044000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable) FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable) FDI_RXA_CTL: 0xb0022050 (enable, train pattern not train, port width X1, 6bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, PCDClk) FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk) FDI_RXC_CTL: 0x00000000 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing disable, RawClk) FDI_RXA_MISC: 0x00000080 (FDI Delay 128) FDI_RXB_MISC: 0x00000080 (FDI Delay 128) FDI_RXC_MISC: 0x00000000 (FDI Delay 0) FDI_RXA_TUSIZE1: 0x7e000000 FDI_RXA_TUSIZE2: 0x7e000000 FDI_RXB_TUSIZE1: 0x7e000000 FDI_RXB_TUSIZE2: 0x7e000000 FDI_RXC_TUSIZE1: 0x00000000 FDI_RXC_TUSIZE2: 0x00000000 FDI_PLL_CTL_1: 0x33505248 FDI_PLL_CTL_2: 0x00000000 FDI_RXA_IIR: 0x00000000 FDI_RXA_IMR: 0x000000ff FDI_RXB_IIR: 0x00000000 FDI_RXB_IMR: 0x000000ff PCH_ADPA: 0x00f40000 (disabled, transcoder A, -hsync, -vsync) HDMIB: 0x0000089c (disabled pipe A 8bpc TMDS DVI audio disabled +vsync +hsync detected) HDMIC: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected) HDMID: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected) PCH_LVDS: 0x80300302 (enabled, pipe A, 18 bit, 1 channel) CPU_eDP_A: 0x00000018 PCH_DP_B: 0x0000001c PCH_DP_C: 0x0000001c PCH_DP_D: 0x00000018 TRANS_DP_CTL_A: 0x00000000 (enabled, pipe A, 18 bit, 1 channel) TRANS_DP_CTL_B: 0x00000000 (enabled, pipe A, 18 bit, 1 channel) TRANS_DP_CTL_C: 0x00000000 (enabled, pipe A, 18 bit, 1 channel) BLC_PWM_CPU_CTL2: 0x80000000 BLC_PWM_CPU_CTL: 0x000001e0 BLC_PWM_PCH_CTL1: 0x80000000 BLC_PWM_PCH_CTL2: 0x11bb11bb PCH_PP_STATUS: 0xc0000008 (on, ready, sequencing idle) PCH_PP_CONTROL: 0xabcd0003 (blacklight disabled, power down on reset, panel on) PCH_PP_ON_DELAYS: 0x01f40834 PCH_PP_OFF_DELAYS: 0x00010032 PCH_PP_DIVISOR: 0x0018690b PORT_DBG: 0x00000000 (HW DRRS off) RC6_RESIDENCY_TIME: 0xffffffff RC6p_RESIDENCY_TIME: 0xffffffff RC6pp_RESIDENCY_TIME: 0xffffffff Link to comment Share on other sites More sharing options...
artur_pt Posted March 25, 2015 Share Posted March 25, 2015 hello sorry about ur graphics never have none .. best place to post that is in guide i'm sure someone more elucidated about the subject can try to help u .. what i read in guide .. u must apply some dsdt patch to work.. really never go interest .. like i say before never have that graphics.. good hack Link to comment Share on other sites More sharing options...
Recommended Posts