Jump to content

Bt Handoff help


bebeto93
 Share

5 posts in this topic

Recommended Posts

Hi i need help with turn on Handoff i compile and put the next kext into S/L/E  https://github.com/the-darkvoid/BrcmPatchRAM, but the result is the next, what is wrong? I use clover bootloader

 

Address: 08-ED-B9-D6-C0-B0

  Bluetooth Low Energy Supported: Yes

  Handoff Supported: No

  Instant Hotspot Supported: No

  Manufacturer: Broadcom

  Transport: USB

  Chipset: Unknown (ffff)

  Firmware Version: v14 c5580

  Bluetooth Power: Off

  Discoverable: Off

  Auto Seek Pointing: Off

  Remote wake: On

  Vendor ID: 0x0489

  Product ID: 0xE042

  HCI Version: 0x6

  HCI Revision: 0x15CC

  LMP Version: 0x6

  LMP Subversion: 0x220E

  Auto Seek Keyboard: Off

 

wifi:

 Card Type: AirPort Extreme  (0x168C, 0x8F)

  Firmware Version: Atheros 9285: 4.0.74.0-P2P

  Locale: APAC

  Country Code: US 

  Supported PHY Modes: 802.11 a/b/g/n

  Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11

  Wake On Wireless: Supported

  AirDrop: Supported

  Status: Connected

 

Link to comment
Share on other sites

1) please put your system specs in your signature.

2) It says "Chipset: Unknown (ffff)" so I think you should try to fix that first. In your other post here, it already said, that you have Chipset 20702A3 which is one step closer. Which did you take a step back?

3) have you applied the hand off patch in clover? That patch has changed for different Yosemite versions - which version do you have?

 

As far as I know, when the chipset is recognized as 20702A3, the clover handoff patch should make it work...

 

Also, you should do the troubleshooting which is offered here:

 

 

Troubleshooting

After installing BrcmPatchRAM, even though your Bluetooth icon may show up, it could be that the firmware has not been properly updated.

Verify the firmware is updated by going to System Information and check the Bluetooth firmware version number under the Bluetooth information panel.

If the version number is "4096", this means no firmware was updated for your device and it will not work properly.

Verify any errors in the system log by running the following command in the terminal:

cat /var/log/system.log | grep -i brcm[fp]

Ensure you check only the latest boot messages, as the system.log might go back several days.

If the firmware upload failed with an error, try installing the debug version of BrcmPatchRAM in order to get more detailed information in the log.

In order to report an error log an issue on github with the following information:

- Device product ID
- Device vendor ID
- BrcmPatchRAM version used
- Dump of BrcmPatchRAM debug output from /var/log/system.log showing the firmware upload failure
Link to comment
Share on other sites

Thanks for the reply, I updated my signature, ok thanks for the info so I decided to create a new post, since I have not received any solution at hand, the only step I do was Update 10.10 to 10.10.2, that was the only step then the chipset no longer recognized... the result on the terminal is:

 

Mar 22 09:56:54 Victors-MacBook-Pro kernel[0]: BrcmPatchRAM: Version 1.4.1 starting on OS X Darwin 14.1.

Mar 22 09:56:54 Victors-MacBook-Pro kernel[0]: BrcmPatchRAM: [0489:e042]: USB [08EDB9D6C0B0 v274] "BCM20702A0" by "Broadcom Corp"

Mar 22 09:56:54 Victors-MacBook-Pro kernel[0]: BrcmPatchRAM: Retrieved firmware for firmware key "BCM20702A1_001.002.014.1443.1484_v5580".

Mar 22 09:56:54 Victors-MacBook-Pro kernel[0]: BrcmPatchRAM: Decompressed firmware (29590 bytes --> 69661 bytes).

Mar 22 09:56:54 Victors-MacBook-Pro kernel[0]: BrcmPatchRAM: Firmware is valid IntelHex firmware.

Mar 22 09:56:56 Victors-MacBook-Pro kernel[0]: BrcmPatchRAM: [0489:e042]: Not responding - Delaying next read.

Mar 22 09:56:56 Victors-MacBook-Pro kernel[0]: BrcmPatchRAM: [0489:e042]: readCompletion - Return aborted (0xe00002eb)

Mar 22 09:56:56 Victors-MacBook-Pro kernel[0]: BrcmPatchRAM: [0489:e042]: Firmware upgrade completed successfully.

Mar 22 09:56:56 Victors-MacBook-Pro kernel[0]: BrcmPatchRAM: Processing time 0.785 seconds.

Mar 22 09:56:56 Victors-MacBook-Pro kernel[0]: BrcmPatchRAM: [0489:e042]: Found existing IOKit personality "com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport".

 

Attach the config.plist of my Clover

 

 

config.plist.zip

Link to comment
Share on other sites

 Share

×
×
  • Create New...