Jump to content

Updated: Chameleon for Yosemite with LZVN cache support (ErmaC and updates by AnV)


Andy Vandijck
 Share

29 posts in this topic

Recommended Posts

I must say that in my the boot times from enter to boot and kernel running are so damn low that for booting with the new kernel cache and Chameleon far beat Clover, even with Apple's HFS+ driver installed and UEFI boot it can't beat the time from enter to kernel running...

In my case it realistically took me about 1,2 seconds to see the kernel cache kick in decompressed and good to go!

It is an updated version ErmaC's Chameleon build with latest clang without any modules (for Chameleon to work) and no module support and some optimisations.

Test it yourself guys,  binaries and Package are attached below and it works amazing for booting once the kernel cache is up to date.

There also seemed to be less warnings in my case during boot than boot.efi and Clover.

All seems stable and good :D

Test it, it is a must...

 

We finally did it with big help for decompilation by MinusZwei, which after some changes and optimisations was so damn fast and good that it just blows the original stolen assembly code wide away...

 

Big thanks to him and everyone who made this possible!!!

 

Chameleon with full LZVN decompression support is now awesome and working great!! :D

 

New version available on Github:

https://github.com/andyvand/Enoch

Prebuilt using Xcode 6.1.1 with all modules compiled into boot.

Package is under sym

Cham-Yos_v2400-ErmaC-AnV.zip

  • Like 13
Link to comment
Share on other sites

...nice work, is this build yosemite boot only, or will it also boot mavericks10.9.5? :smoke:

Should boot all OS X versions from 10.4 and up, tested 10.9 and 10.10 DP1

  • Like 1
Link to comment
Share on other sites

it works amazing for booting once the kernel cache is up to date.

 

Thanks for the build.

 

Any suggestions on getting the kernel cache up to date?  I’ve deleted it, rebooted and allowed Yosemite to rebuild it, then rebooted again.  But it still goes through all of the extensions during boot.

 

Also, your download link says v2400, but the binary and installer say v2399.

Link to comment
Share on other sites

Thanks for the build.

 

Any suggestions on getting the kernel cache up to date?  I’ve deleted it, rebooted and allowed Yosemite to rebuild it, then rebooted again.  But it still goes through all of the extensions during boot.

 

Also, your download link says v2400, but the binary and installer say v2399.

That's simple under Yosemite itself...

With compression type set to LZVN type this::

sudo k'extcache -system-prelinked-kernel -z

Make sure also the kext-dev-mode=1 boot argument is set before boot

the -z parameters to kextcache has esured for a while in case of OS X that it permits even more drivers in the cache and actually doesn't check them...

It's easier making a new kernel cache using Apple Yosemite kextcache tool than it was booting from one...

  • Like 2
Link to comment
Share on other sites

Hmmm…something still wrong.

 

In Yosemite DP8:

Bootcaches.plist has compression set to lzvn

Boot.plist has kernel flag: kext-dev-mode=1

Used installer from Cham-Yos_v2400-ErmaC-AnV.zip from link above.

Executed command: sudo kextcache -system-prelinked-kernel -z

 

Still, when I boot Yosemite, it doesn’t use the kernel cache.

Link to comment
Share on other sites

try with -s boot then mount the drive /sbin/mount -uw

then kextcache -u thats how it states to build it in the DP read me.

Well, the real commands are:

 

/sbin/mount -uw /

/usr/sbin/kextcache -Boot -U /

 

-or-

 

mount -uw /

kextcache -Boot -U /

 

And, no, that did not help, but thanks for the suggestion.

 

Could it be that booting with -v also force it to skip cache. ( just guesssing) :D

Booting with -v does not ignore the kextcache.  Booting with -x does.

Link to comment
Share on other sites

Yes this one works , not need the flag 

 

Thanks for you work AnV 

I told you chris1111!!!!Good luck!!!

@Andy Vandijck

 

Why does not work the same as the Clover?

I mean black background and white logo!!

Where is the error?

Thanks in advanced. 

Link to comment
Share on other sites

Its defenitely an answer :D

updated version ErmaC's Chameleon build with latest clang without any modules (for Chameleon to work) and no module support ... definitely does NOT work with modules here... I have FileNVRAM.dylib installed, and it does not pass values through to the OS :smoke:

Link to comment
Share on other sites

 

 

Chameleon 2.2svn (svn-rDevelop-v2399) [2014-09-28 19:26:57]
CPUID Raw Values:
00: 0000000d-756e6547-6c65746e-49656e69
01: 0001067a-00040800-0408e3fd-bfebfbff
02: 05b0b101-005657f0-00000000-2cb43048
03: 00000000-00000000-00000000-00000000
04: 0c000121-01c0003f-0000003f-00000001
05: 00000040-00000040-00000003-00022220
06: 00000001-00000002-00000003-00000000
07: 80000008-00000000-00000000-00000000
08: 00000000-00000000-00000001-20100000
09: 00003024-00000000-00000000-00000000
msr(602): ia32_perf_stat 0x06000821
max: 8 current: 8

---------------------------------------------
--------------- CPU INFO ---------------
---------------------------------------------
Brand String: Intel® Core2 Quad CPU Q9400 @ 2.66GHz
Vendor: 0x756e6547
Family: 0x6
ExtFamily: 0x0
Signature: 1067a
Model: 0x17
ExtModel: 0x1
Stepping: 0xa
MaxCoef: 0x8
CurrCoef: 0x8
MaxDiv: 0x0
CurrDiv: 0x8
TSCFreq: 2660MHz
FSBFreq: 332MHz
CPUFreq: 2660MHz
Cores: 4
Logical processor: 4
Features: 0x0000025f

---------------------------------------------
Read HFS+ file: [hd(0,2)/System/Library/CoreServices/SystemVersion.plist] 478 bytes.
Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 817 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/theme.plist] 2786 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/background.png] 945596 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/logo.png] 114 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_generic.png] 11945 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_generic_o.png] 13886 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_hfsplus.png] 15149 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_hfsplus_o.png] 16282 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_hfsraid.png] 15205 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_hfsraid_o.png] 16432 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_ext3.png] 15106 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_ext3_o.png] 16491 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_fat.png] 11622 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_fat_o.png] 13581 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_ntfs.png] 14142 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_ntfs_o.png] 15891 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_cdrom.png] 14946 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_cdrom_o.png] 16910 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_selection.png] 891 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_scroll_prev.png] 462 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_scroll_next.png] 476 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_boot.png] 1922 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_verbose.png] 1826 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_ignore_caches.png] 1763 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_single_user.png] 1883 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_memory_info.png] 1830 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_video_info.png] 1945 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_help.png] 1879 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_verbose_disabled.png] 1464 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_ignore_caches_disabled.png] 1464 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_single_user_disabled.png] 1464 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_selection.png] 1593 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/progress_bar.png] 1040 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/progress_bar_background.png] 1026 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/text_scroll_prev.png] 369 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/text_scroll_next.png] 355 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/font_console.png] 8277 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/font_small.png] 407 bytes.
Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 817 bytes.
boot-uuid: 5F7A3C45-A8E5-3F46-9239-A6552E90D6FA
10.7, 10.8, 10.9 & 10.10 kernel cache file path = /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
Loading kernel cache: '/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache'
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 4096 bytes.
Fat Binary found. Reading thin part only...
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 17654190 bytes.
Decompressing Kernel: OK.
ACPI Table not found: DSDT.aml
No DSDT found, using 0 as uid value.
Using PCI-Root-UID value: 0
Framebuffer @0xE0000000 MMIO @0xFC200000 I/O Port @0x00002000 ROM Addr @0x00000000
ATI card POSTed, Read HFS+ file: [hd(0,2)/Extra/1002_6759_04031043.rom] 65536 bytes.
(AtiConfig) Framebuffer set to: Ipomoea
# of ports set to framebuffer's default: 3
ATI Turks AMD Radeon HD 6570 Series 1024MB (Ipomoea) [1002:6759] (subsys [1043:0403]):: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)
LAN Controller [8086:10de] :: PciRoot(0x0)/Pci(0x19,0x0)
Setting up lan keys
Read HFS+ file: [hd(0,2)/Extra/smbios.plist] 797 bytes.
Intel Corporation Q45/Q43 DRAM Controller [8086:2e10] at 00:00.0
Frequency detected: 532 MHz (1064) Dual Channel
CAS:8 tRC:8 tRP:8 RAS:20 (8-8-8-20)
SMBus CmdReg: 0x1
Scanning SMBus [8086:3a60], mmio: 0xfc32b004, ioport: 0x1c20, hostc: 0x1
SPD[0] (size): 147 @0x50
Slot: 0 Type 24 4096MB (DDR3 SDRAM) 1064MHz Vendor=OCZ
PartNo=OCZ3G1333ULV4G SerialNo=00000000
SPD[0] (size): 146 @0x51
Slot: 1 Type 24 4096MB (DDR3 SDRAM) 1064MHz Vendor=Micron Technology
PartNo=16JTF51264AZ-1G4H1H1 SerialNo=313331BF
SPD[0] (size): 146 @0x52
Slot: 2 Type 24 2048MB (DDR3 SDRAM) 1064MHz Vendor=Micron Technology
PartNo=8JTF25664AZ-1G4D1D1 SerialNo=2923049A
SPD[0] (size): 146 @0x53
Slot: 3 Type 24 2048MB (DDR3 SDRAM) 1064MHz Vendor=Samsung
PartNo=M378B5773CH0-CH9 SerialNo=93631BF8
SPD[0] (size): 255 @0x54
SPD[0] (size): 85 @0x55
SPD[0] (size): 255 @0x56
SPD[0] (size): 255 @0x57
CPU is Intel® Core2 Quad CPU Q9400 @ 2.66GHz, family 0x6, model 0x17

SMBIOS rev.: 2.4, DMI rev.: 2.4

Handle: 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Apple Computer, Inc.
Version: MP41.88Z.0081.B08.1001221313
Release Date: 01/22/10
BIOS Revision: 0.1

Handle: 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Apple Computer, Inc.
Product Name: MacPro4,1
Version: 1.0
Serial Number: ** PRIVATE **
UUID: ** PRIVATE **
Wake-up Type: Power Switch
SKU Number: Default SKU#
Family: Mac Pro

Handle: 0x0002, DMI type 2, 16 bytes
Base Board Information
Manufacturer: Apple Inc.
Product Name: Mac-F221BEC8
Version: NONE
Serial Number: ** PRIVATE **
Asset Tag: Default Asset Tag#
Location In Chassis: INSIDE
Type: Motherboard

Handle: 0x0003, DMI type 3, 20 bytes
Chassis Information
Manufacturer: Apple Inc.
Type: Unknown
Version: NONE
Serial Number: ** PRIVATE **
Asset Tag: Default Asset Tag#

Handle: 0x0004, DMI type 4, 38 bytes
Processor Information
Socket Designation: LGA 775
Type: Central Processor
Family: 0xBE
Manufacturer: Intel
ID: 0x1067A
Version: Intel® Core2 Quad CPU Q9400 @ 2.66GHz
External Clock: 333 MHz
Max Speed: 2660 MHz
Current Speed: 2660 MHz
Upgrade: Socket LGA775
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 4
Core Enabled: 4
Thread Count: 4

Handle: 0x001a, DMI type 11, 5 bytes
OEM Strings
String 1: BB:5C54A

Handle: 0x001f, DMI type 17, 27 bytes
Memory Device
Error Information Handle: No Error
Size: 4096 MB
Form Factor: DIMM
Locator: J6G1
Bank Locator: DIMM 0
Memory Type: DDR3
Speed: 1067 MHz
Manufacturer: OCZ
Serial Number: ** PRIVATE **
Asset Tag: 00000000
Part Number: OCZ3G1333ULV4G

Handle: 0x0020, DMI type 17, 27 bytes
Memory Device
Error Information Handle: No Error
Size: 4096 MB
Form Factor: DIMM
Locator: J6G2
Bank Locator: DIMM 1
Memory Type: DDR3
Speed: 1067 MHz
Manufacturer: Micron Technology
Serial Number: ** PRIVATE **
Asset Tag: 00000000
Part Number: 16JTF51264AZ-1G4H1H1

Handle: 0x0021, DMI type 17, 27 bytes
Memory Device
Error Information Handle: No Error
Size: 2048 MB
Form Factor: DIMM
Locator: J6H1
Bank Locator: DIMM 2
Memory Type: DDR3
Speed: 1067 MHz
Manufacturer: Micron Technology
Serial Number: ** PRIVATE **
Asset Tag: 00000000
Part Number: 8JTF25664AZ-1G4D1D1

Handle: 0x0022, DMI type 17, 27 bytes
Memory Device
Error Information Handle: No Error
Size: 2048 MB
Form Factor: DIMM
Locator: J6H2
Bank Locator: DIMM 3
Memory Type: DDR3
Speed: 1067 MHz
Manufacturer: Samsung
Serial Number: ** PRIVATE **
Asset Tag: 00000000
Part Number: M378B5773CH0-CH9

Handle: 0x003d, DMI type 131, 6 bytes
Apple specific Processor Type
Cpu-type: 0x501

Handle 0x003e, DMI type 127, 4 bytes
End of Table

SMBIOS orig was = f6920
SMBIOS new is = 296a000
ACPI Table not found: DSDT.aml
Generating P-States config: NO
Generating C-States config: NO
ACPI Table not found: SSDT.aml
No ACPI version 1 found. Ignoring
RSDP version 2 found @f68f0. Length=36
RSDT @dfe9d7e7, Length 108
TABLE FACP,FADT found @dfeaab19, Length 132
FADT: ACPI Restart Fix applied!
TABLE TCPA,TABLE _MAR,TABLE SLIC,TABLE MCFG,TABLE HPET,TABLE APIC,TABLE BOOT,TABLE ASF!,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,
RSDT: Original checksum 84, New checksum 89 at 2970000

XSDT @0;dfe9d853, Length=180
copied (OEM)
FADT found @0dfeaabcf, Length 244
FADT: ACPI Restart Fix applied!
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)

RSDP: Original checksum 134, New checksum 115
RSDP: Original extended checksum 233, New extended checksum 35
ACPI version 2 patching finished

Starting Darwin/x86_64 [Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64]
Boot Args:

 

 

 

...this is my bdmesg, as can be seen, no dylib loaded...so I ask again...will modules support be added? :smoke:

Link to comment
Share on other sites

 

 

Chameleon 2.2svn (svn-rDevelop-v2399) [2014-09-28 19:26:57]

CPUID Raw Values:

00: 0000000d-756e6547-6c65746e-49656e69

01: 0001067a-00040800-0408e3fd-bfebfbff

02: 05b0b101-005657f0-00000000-2cb43048

03: 00000000-00000000-00000000-00000000

04: 0c000121-01c0003f-0000003f-00000001

05: 00000040-00000040-00000003-00022220

06: 00000001-00000002-00000003-00000000

07: 80000008-00000000-00000000-00000000

08: 00000000-00000000-00000001-20100000

09: 00003024-00000000-00000000-00000000

msr(602): ia32_perf_stat 0x06000821

max: 8 current: 8

 

---------------------------------------------

--------------- CPU INFO ---------------

---------------------------------------------

Brand String: Intel® Core™2 Quad CPU Q9400 @ 2.66GHz

Vendor: 0x756e6547

Family: 0x6

ExtFamily: 0x0

Signature: 1067a

Model: 0x17

ExtModel: 0x1

Stepping: 0xa

MaxCoef: 0x8

CurrCoef: 0x8

MaxDiv: 0x0

CurrDiv: 0x8

TSCFreq: 2660MHz

FSBFreq: 332MHz

CPUFreq: 2660MHz

Cores: 4

Logical processor: 4

Features: 0x0000025f

 

---------------------------------------------

Read HFS+ file: [hd(0,2)/System/Library/CoreServices/SystemVersion.plist] 478 bytes.

Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 817 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/theme.plist] 2786 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/background.png] 945596 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/logo.png] 114 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_generic.png] 11945 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_generic_o.png] 13886 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_hfsplus.png] 15149 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_hfsplus_o.png] 16282 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_hfsraid.png] 15205 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_hfsraid_o.png] 16432 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_ext3.png] 15106 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_ext3_o.png] 16491 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_fat.png] 11622 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_fat_o.png] 13581 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_ntfs.png] 14142 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_ntfs_o.png] 15891 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_cdrom.png] 14946 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_cdrom_o.png] 16910 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_selection.png] 891 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_scroll_prev.png] 462 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/device_scroll_next.png] 476 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_boot.png] 1922 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_verbose.png] 1826 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_ignore_caches.png] 1763 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_single_user.png] 1883 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_memory_info.png] 1830 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_video_info.png] 1945 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_help.png] 1879 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_verbose_disabled.png] 1464 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_ignore_caches_disabled.png] 1464 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_single_user_disabled.png] 1464 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/menu_selection.png] 1593 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/progress_bar.png] 1040 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/progress_bar_background.png] 1026 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/text_scroll_prev.png] 369 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/text_scroll_next.png] 355 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/font_console.png] 8277 bytes.

Read HFS+ file: [hd(0,2)/Extra/Themes/iCham2/font_small.png] 407 bytes.

Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 817 bytes.

boot-uuid: 5F7A3C45-A8E5-3F46-9239-A6552E90D6FA

10.7, 10.8, 10.9 & 10.10 kernel cache file path = /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache

Loading kernel cache: '/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache'

Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 4096 bytes.

Fat Binary found. Reading thin part only...

Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 17654190 bytes.

Decompressing Kernel: OK.

ACPI Table not found: DSDT.aml

No DSDT found, using 0 as uid value.

Using PCI-Root-UID value: 0

Framebuffer @0xE0000000 MMIO @0xFC200000 I/O Port @0x00002000 ROM Addr @0x00000000

ATI card POSTed, Read HFS+ file: [hd(0,2)/Extra/1002_6759_04031043.rom] 65536 bytes.

(AtiConfig) Framebuffer set to: Ipomoea

# of ports set to framebuffer's default: 3

ATI Turks AMD Radeon HD 6570 Series 1024MB (Ipomoea) [1002:6759] (subsys [1043:0403]):: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)

LAN Controller [8086:10de] :: PciRoot(0x0)/Pci(0x19,0x0)

Setting up lan keys

Read HFS+ file: [hd(0,2)/Extra/smbios.plist] 797 bytes.

Intel Corporation Q45/Q43 DRAM Controller [8086:2e10] at 00:00.0

Frequency detected: 532 MHz (1064) Dual Channel

CAS:8 tRC:8 tRP:8 RAS:20 (8-8-8-20)

SMBus CmdReg: 0x1

Scanning SMBus [8086:3a60], mmio: 0xfc32b004, ioport: 0x1c20, hostc: 0x1

SPD[0] (size): 147 @0x50

Slot: 0 Type 24 4096MB (DDR3 SDRAM) 1064MHz Vendor=OCZ

PartNo=OCZ3G1333ULV4G SerialNo=00000000

SPD[0] (size): 146 @0x51

Slot: 1 Type 24 4096MB (DDR3 SDRAM) 1064MHz Vendor=Micron Technology

PartNo=16JTF51264AZ-1G4H1H1 SerialNo=313331BF

SPD[0] (size): 146 @0x52

Slot: 2 Type 24 2048MB (DDR3 SDRAM) 1064MHz Vendor=Micron Technology

PartNo=8JTF25664AZ-1G4D1D1 SerialNo=2923049A

SPD[0] (size): 146 @0x53

Slot: 3 Type 24 2048MB (DDR3 SDRAM) 1064MHz Vendor=Samsung

PartNo=M378B5773CH0-CH9 SerialNo=93631BF8

SPD[0] (size): 255 @0x54

SPD[0] (size): 85 @0x55

SPD[0] (size): 255 @0x56

SPD[0] (size): 255 @0x57

CPU is Intel® Core™2 Quad CPU Q9400 @ 2.66GHz, family 0x6, model 0x17

 

SMBIOS rev.: 2.4, DMI rev.: 2.4

 

Handle: 0x0000, DMI type 0, 24 bytes

BIOS Information

Vendor: Apple Computer, Inc.

Version: MP41.88Z.0081.B08.1001221313

Release Date: 01/22/10

BIOS Revision: 0.1

 

Handle: 0x0001, DMI type 1, 27 bytes

System Information

Manufacturer: Apple Computer, Inc.

Product Name: MacPro4,1

Version: 1.0

Serial Number: ** PRIVATE **

UUID: ** PRIVATE **

Wake-up Type: Power Switch

SKU Number: Default SKU#

Family: Mac Pro

 

Handle: 0x0002, DMI type 2, 16 bytes

Base Board Information

Manufacturer: Apple Inc.

Product Name: Mac-F221BEC8

Version: NONE

Serial Number: ** PRIVATE **

Asset Tag: Default Asset Tag#

Location In Chassis: INSIDE

Type: Motherboard

 

Handle: 0x0003, DMI type 3, 20 bytes

Chassis Information

Manufacturer: Apple Inc.

Type: Unknown

Version: NONE

Serial Number: ** PRIVATE **

Asset Tag: Default Asset Tag#

 

Handle: 0x0004, DMI type 4, 38 bytes

Processor Information

Socket Designation: LGA 775

Type: Central Processor

Family: 0xBE

Manufacturer: Intel

ID: 0x1067A

Version: Intel® Core™2 Quad CPU Q9400 @ 2.66GHz

External Clock: 333 MHz

Max Speed: 2660 MHz

Current Speed: 2660 MHz

Upgrade: Socket LGA775

Serial Number: Not Specified

Asset Tag: Not Specified

Part Number: Not Specified

Core Count: 4

Core Enabled: 4

Thread Count: 4

 

Handle: 0x001a, DMI type 11, 5 bytes

OEM Strings

String 1: BB:5C54A

 

Handle: 0x001f, DMI type 17, 27 bytes

Memory Device

Error Information Handle: No Error

Size: 4096 MB

Form Factor: DIMM

Locator: J6G1

Bank Locator: DIMM 0

Memory Type: DDR3

Speed: 1067 MHz

Manufacturer: OCZ

Serial Number: ** PRIVATE **

Asset Tag: 00000000

Part Number: OCZ3G1333ULV4G

 

Handle: 0x0020, DMI type 17, 27 bytes

Memory Device

Error Information Handle: No Error

Size: 4096 MB

Form Factor: DIMM

Locator: J6G2

Bank Locator: DIMM 1

Memory Type: DDR3

Speed: 1067 MHz

Manufacturer: Micron Technology

Serial Number: ** PRIVATE **

Asset Tag: 00000000

Part Number: 16JTF51264AZ-1G4H1H1

 

Handle: 0x0021, DMI type 17, 27 bytes

Memory Device

Error Information Handle: No Error

Size: 2048 MB

Form Factor: DIMM

Locator: J6H1

Bank Locator: DIMM 2

Memory Type: DDR3

Speed: 1067 MHz

Manufacturer: Micron Technology

Serial Number: ** PRIVATE **

Asset Tag: 00000000

Part Number: 8JTF25664AZ-1G4D1D1

 

Handle: 0x0022, DMI type 17, 27 bytes

Memory Device

Error Information Handle: No Error

Size: 2048 MB

Form Factor: DIMM

Locator: J6H2

Bank Locator: DIMM 3

Memory Type: DDR3

Speed: 1067 MHz

Manufacturer: Samsung

Serial Number: ** PRIVATE **

Asset Tag: 00000000

Part Number: M378B5773CH0-CH9

 

Handle: 0x003d, DMI type 131, 6 bytes

Apple specific Processor Type

Cpu-type: 0x501

 

Handle 0x003e, DMI type 127, 4 bytes

End of Table

 

SMBIOS orig was = f6920

SMBIOS new is = 296a000

ACPI Table not found: DSDT.aml

Generating P-States config: NO

Generating C-States config: NO

ACPI Table not found: SSDT.aml

No ACPI version 1 found. Ignoring

RSDP version 2 found @f68f0. Length=36

RSDT @dfe9d7e7, Length 108

TABLE FACP,FADT found @dfeaab19, Length 132

FADT: ACPI Restart Fix applied!

TABLE TCPA,TABLE _MAR,TABLE SLIC,TABLE MCFG,TABLE HPET,TABLE APIC,TABLE BOOT,TABLE ASF!,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,TABLE SSDT,

RSDT: Original checksum 84, New checksum 89 at 2970000

 

XSDT @0;dfe9d853, Length=180

copied (OEM)

FADT found @0dfeaabcf, Length 244

FADT: ACPI Restart Fix applied!

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

copied (OEM)

 

RSDP: Original checksum 134, New checksum 115

RSDP: Original extended checksum 233, New extended checksum 35

ACPI version 2 patching finished

 

Starting Darwin/x86_64 [Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64]

Boot Args:

 

 

 

...this is my bdmesg, as can be seen, no dylib loaded...so I ask again...will modules support be added? :smoke:

Hey RobertX, AnV has remove the module in this build, and you ask because the modules does not work?

However AnV, is giving us the biggest hand for this, and perhaps soon some modules will return to work...... I saw today a very important thing in his other Topic :lol:

Edited by Micky1979
removed the Smiley
Link to comment
Share on other sites

Hey RobertX, AnV has remove the module in this build, and you ask because the modules does not work? :hysterical:

However AnV, is giving us the biggest hand for this, and perhaps soon some modules will return to work...... I saw today a very important thing in his other Topic :lol:

...Mickey, I too can read, and am well aware of andy's contributions here...I asked a question, directed to andy, if modules support could be added to this build...forgive me if, a question from me to andy makes you laugh...I've been asking question here for almost ten years :smoke:

Link to comment
Share on other sites

...Micky, I too can read, and am well aware of andy's contributions here...I asked a question, directed to andy, if modules support could be added to this build...forgive me if, a question from me to andy makes you laugh...I've been asking question here for almost ten years :smoke:

Oops, sorry I did not laugh at you in a negative way, much less to offend. 
I apologize. 

 

Only think that AnV removed modules because they can not work. This because some things are not yet in place, and maybe one of these is the lzvn compression, which AnV today has posted here a starting point..
so I do not expect anyone to ask because the modules does not work (and test with it installed) after it has been declared state that does not work
  • Like 1
Link to comment
Share on other sites

In my system boot from cache not work. I have a raid and fusiondrive, without cache osx not boot. With mavericks work great...

 

I tryed to rebuild a cache some times, but the issue remain... Can't find mach_kernel or (with boot.plist edit) can't find /System/Library/Kernels/kernel

Link to comment
Share on other sites

 Share

×
×
  • Create New...