TIMMAYOSX Posted June 18, 2014 Share Posted June 18, 2014 Just so people know, I bit the bullet and did the DP2 update via software update, and it installed and rebooted without any issues. YMMV but I do think most people will not have many issues with this. If course, re-apply your audio kext and whatever else you need to do after the update. Note: It did take me two tries to install the update however. The first time it asked me to reboot (to install), it did reboot but never installed anything. I had to go back into the software update and press the reboot button again, this time it installed properly without any further complications. Good luck! 1 Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/ Share on other sites More sharing options...
zeamp Posted June 18, 2014 Share Posted June 18, 2014 Thanks! I'm going in... 1 Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031464 Share on other sites More sharing options...
JBud Posted June 18, 2014 Share Posted June 18, 2014 Successfully updated, had a couple errors, but that's probably because my /Applications and /Users folders are on a separate drive. Managed to get it installed though, Dark Mode is looking good, but needs some work before I use it often 1 Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031467 Share on other sites More sharing options...
twoflower Posted June 18, 2014 Share Posted June 18, 2014 I still have an issue with the mouse. Every click or scroll moves the cursor to the top left corner. Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031506 Share on other sites More sharing options...
TIMMAYOSX Posted June 18, 2014 Author Share Posted June 18, 2014 What kind of mouse? I've used everything from USB Wireless to garbage USB mice, all without problems in Yosemite. What are your computer specs? Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031507 Share on other sites More sharing options...
a3yu Posted June 18, 2014 Share Posted June 18, 2014 all ok FLAWLESS VICTORY! 2 Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031521 Share on other sites More sharing options...
Colask8 Posted June 18, 2014 Share Posted June 18, 2014 GraphicsInjector isn't working for me. Investigating atm. Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031604 Share on other sites More sharing options...
zeamp Posted June 18, 2014 Share Posted June 18, 2014 After installation, it hangs at rc installation startup (cannot find file) and does not ever move past it. Does not boot. Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031619 Share on other sites More sharing options...
redneck Posted June 18, 2014 Share Posted June 18, 2014 Yose dp2 Boot hangs up at xpcproxy Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031634 Share on other sites More sharing options...
gsxb Posted June 18, 2014 Share Posted June 18, 2014 Same here updated to dp2 and will not boot displays "could not exec 14a261i xpxproxy Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031722 Share on other sites More sharing options...
zeamp Posted June 18, 2014 Share Posted June 18, 2014 I manually loaded FakeSMC.kext again and now it's freezing on /etc/rc.server and /etc/rc.installer_cleanup (both not found). Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031812 Share on other sites More sharing options...
Colask8 Posted June 18, 2014 Share Posted June 18, 2014 @methamp did u rebuild kext caches? kextcache -m /System/Library/Caches/com.apple.kext.caches/Extensions.mkext /System/Library/Extensions that worked for me. As for GraphicsInjector not working for me, problem is in GeForce kexts. Once i unloaded kexts i got into OS, tried updating to latest drivers, it didnt work sadly. Does anyone have problems like this with Fermi cards? Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031825 Share on other sites More sharing options...
zeamp Posted June 18, 2014 Share Posted June 18, 2014 @methamp did u rebuild kext caches? kextcache -m /System/Library/Caches/com.apple.kext/caches/Extensions.mkext /System/Library/Extensions that worked for me. As for GraphicsInjector not working for me, problem is in GeForce kexts. Once i unloaded kexts i got into OS, tried updating to latest drivers, it didnt work sadly. Does anyone have problems like this with Fermi cards? Yes, and that didn't change anything. :-/ Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031841 Share on other sites More sharing options...
TIMMAYOSX Posted June 19, 2014 Author Share Posted June 19, 2014 I sure hope this issue can be resolved because DP2 fixes several bugs that have been hitting me (namely shade issues with Safari, and performance in Parallels). Are you guys using Clover, or Chameleon? I am personally using Clover. Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031913 Share on other sites More sharing options...
MNSiw Posted June 19, 2014 Share Posted June 19, 2014 Chameleon can boot Yosemite? As I heard only Clover is booting booting Yosemite for now. Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2031924 Share on other sites More sharing options...
jamiethemorris Posted June 19, 2014 Share Posted June 19, 2014 Chameleon can boot Yosemite? As I heard only Clover is booting booting Yosemite for now. Yes, Chameleon is working now. Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2032009 Share on other sites More sharing options...
Colask8 Posted June 19, 2014 Share Posted June 19, 2014 I fixed my problem, idk what it was, just reinstalled Yosemite, and straight updated to DP2 works fine so far. Also i see they fixed bugs in Safari yay 2 Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2032084 Share on other sites More sharing options...
redneck Posted June 19, 2014 Share Posted June 19, 2014 wondering if I get the xpcproxy because at install it would only see the 2 usb drives. Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2032094 Share on other sites More sharing options...
TIMMAYOSX Posted June 19, 2014 Author Share Posted June 19, 2014 I fixed my problem, idk what it was, just reinstalled Yosemite, and straight updated to DP2 works fine so far. Also i see they fixed bugs in Safari yay The bug fixes in Safari alone are well worth the update IMO Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2032101 Share on other sites More sharing options...
antic Posted June 19, 2014 Share Posted June 19, 2014 Problems here with DP2. Follow the instruction that system requires reboot to install the update. The progress bar gets about halfway across then I get a reboot. I get back to the Login screen but I'm still on the original DP1. I have no Idea whats happening. Has anyone got any ideas. By the way I'm using Clover 2695 Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2032209 Share on other sites More sharing options...
HUSABER Posted June 19, 2014 Share Posted June 19, 2014 Problems here with DP2. Follow the instruction that system requires reboot to install the update. The progress bar gets about halfway across then I get a reboot. I get back to the Login screen but I'm still on the original DP1. I have no Idea whats happening. Has anyone got any ideas. By the way I'm using Clover 2695 With Chameleon bootloader not have any problem with DP2 update.. Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2032225 Share on other sites More sharing options...
antic Posted June 19, 2014 Share Posted June 19, 2014 With Chameleon bootloader not have any problem with DP2 update.. I have tried that as we'll. I get the same result.. Thanks anyway. Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2032255 Share on other sites More sharing options...
RCOO Posted June 20, 2014 Share Posted June 20, 2014 I'm using Clover. Before DP2 my bluetooth would would work perfectly (which never worked before) along with my wifi (Atheros AR9285). After DP2 bluetooth is not available. Back to using a dongle Any hints on what it could be? Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2032511 Share on other sites More sharing options...
redneck Posted June 20, 2014 Share Posted June 20, 2014 antic use boot flag -v then you should see where it stops. mine stops at xpcproxy Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2032612 Share on other sites More sharing options...
graphine Posted June 21, 2014 Share Posted June 21, 2014 @methamp did u rebuild kext caches? kextcache -m /System/Library/Caches/com.apple.kext.caches/Extensions.mkext /System/Library/Extensions that worked for me. As for GraphicsInjector not working for me, problem is in GeForce kexts. Once i unloaded kexts i got into OS, tried updating to latest drivers, it didnt work sadly. Does anyone have problems like this with Fermi cards? Where should I put this command as I can't boot? I tried in single user mode and I'm getting a error Cannot lock ... Unknow error (44c) , I did mount the partition as rw. Can you help me? Link to comment https://www.insanelymac.com/forum/topic/298912-yosemite-dp2/#findComment-2032646 Share on other sites More sharing options...
Recommended Posts