Jump to content

[Ajuda] Instalação Moutain Lion


gustavobgs
 Share

95 posts in this topic

Recommended Posts

Olá

Realmente reconhece como%


Olá

Realmente reconhece como sendo outra.

Mas pode está correto, pois eu tinha uma gráfica aqui que era reconhecida como sendo outra e trabalhava muito bem, acontece que a Nvidia lança algumas gráficas baseadas em outras, mudando apenas o nome e alguns elementos como: VRAM, Bits... Mas é baseado em outra.

Só acho estranho a tua GTX ser baseada em uma GT, mas se o desempenho aumentou, não vejo problemas nisso, nada em 100% num hack.

Pelo visto teu gerenciamento de energia está muito errado. Teu mínimo é 27, coisa que nem eu que tenho i7 tenho um mínimo desses, o meu é 16; e o máximo é 34, nem tem states intermediários. Já ativou o P e C States no org.chameleon?

  • Like 1
Link to comment
Share on other sites

É só abrir o CW marcar P e C e apertar save?

Olha como ta : 

JUIctPX.png

 

Depois de arrumar esse gerenciamento chega a parte do DSDT?

Baixei no site do olaria um patch para minha placa mãe, mas depois você me ensina, vamo terminar o gerenciamento..

 

Só por curiosidade, qual sua pontuação no OPENGL Extension?

Segue o meu resultado..

e7vdMVu.png

 

 

Obrigado!

Link to comment
Share on other sites

olá

 

+ 1 vez para quê ativar os states ?.. se o gerenciamento não é nativo.. para ser nativo o dsdt tem de ser editado...

 

e depois remover a nullcpupowermanagement

 

e ai então ativar os states...

 

onde está o kextstat ? de certeza k está lá a nullcpupowermanagement

 

e tás a ter erro no no bus da PCI se leres o dmesg.. é para isso k serve para ler

 

bom hack

Link to comment
Share on other sites

olá

 

pode ser do dsdt .. tem de ser editado o device sbus

 

os problemas da grafica podem vir dai e também do cpu

 

extrai o dsdt pelo windows (limpinho) e posta ai para ser editado

 

bom hack

 

 

Segue o dsdt extraido pelo everest,

 

 

 

http://www.sendspace.com/file/6g0x63

Tentei fazer upload pelo forum e o mesmo disse que eu não tenho permissão

Link to comment
Share on other sites

olá

 

aqui está

 

remove a nullcpupower...

 

ativa os states

 

está injetado layout (0C) 12 para a applehda

 

se usares voodoohda, ou removes a applehda ou usas o disabler

 

attachicon.gifDSDT.zip

 

bom hack

Valeu Arthur.

 

Em relação ao DSDT, extrai e veio o DSDT.aml, cliquei duas vezes a abriu o CW

após isso apareceu um DSDT.dsl e log.txt no desktop.

 

No CW > input file (dsl/aml) eu coloco qualquer um dos dois?

E depois disso clico em compile?

Fim?

 

Uso Voodohda, ai é só remover a applehda lá na basta S/L/E né?

 

Valeu!

Link to comment
Share on other sites

olá

 

isso é muito simples..

 

metes o dsdt.aml  em /Extra

 

é esse k o sistema vai utilizar

 

foste clickar duas vezes para k ? o dsdt.dsl está descompilado.. é um file de texto k o sistema não entende

 

e apontas no wizard para o caminho do dsdt

 

Extra/DSDT.aml

 

bom hack

  • Like 1
Link to comment
Share on other sites

Não consigo apontar o DSDT.aml para o wizard, porque não aparece a partição que está instalado meu ML, que se chama "OSX"

Aparece as outras partições "Arquivos" e "Untitled ( Que é o win 7)

 

Ai não da pra navegar até OSX > Extra

Se escrever Extra/DSDT.aml e clicar em save funciona?

gnLs1Sg.png

 

Caso sim, agora é só remover a nullcpupower e a applehda, pois uso Voodo..

Se sim, e só ir em S/L/E e deletar né? 

 

Abraços

Link to comment
Share on other sites

Olá

 

O que está fazendo? É só copiar o DSDT que artur te deu e colocar na pasta Extra, não precisar usar programa nenhum pra isso, só copiar e colar e o Chameleon vai reconhecer.

 

Ativa P e C States, Remove a Null e a AppleHDA. É só ir lá na pasta S/L/E e deletar.

 

@artur Interessante esse negocio, vou dar uma estudada aqui.

Link to comment
Share on other sites

Fiz o procedimento, Reiniciei pra ver se nao dava kp Inicia o ML, abre o desktop ai eu mexo um pouquinho tipo uns 14 segundos e freeza a tela e não volta mais.. Já reiniciei e deu isso de novo.. :(

 

Coloquei a kext null de novo pra ver se o freeze parava, e parou..

 

O que estou fazendo de errado?

 

O CW já reconhece o DSDT.aml que está dentro da pasta extra..

Link to comment
Share on other sites

Olá

Ativou os States antes de reiniciar? Se já ativou, tenta remover aquela legacyAGPM, mas faz backup dela antes de remover.

Remove a Null de novo. Reinicia e testa.

Não é o CW que vai reconhecer a DSDT é o bootloader Chameleon, CW é apenas um app de configuração, é só colocar na pasta Extra e pronto.

Link to comment
Share on other sites

Continuou dando freeze, sem a nullcpu e sem a LegacyAGPM..

 

 

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Boot Graphics</key>
<string>Yes</string>
<key>DSDT</key>
<string>Extra/DSDT.aml</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>npci=0x2000</string>
<key>Timeout</key>
<string>5</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>

</plist>

 

esse é o meu arquivo org.chameleon.bootlis..

está tudo correto?

Link to comment
Share on other sites

Muito obrigado pela ajuda rapazes, porém ocorreu uma trágedia haha!

 

Choveu muito forte ontem aqui em casa e queimou a fonte e meu hd, já providenciei a compra de outra fonte e outro hd.

 

Assim que chegar instalo de novo e deixo meu ML no mesmo estado que se encontrava aqui no tópico..

 

Depois continuamos a refinar ele..

 

Até sábado já chegou as peças e instalei..

 

Obrigado rapazes.

Link to comment
Share on other sites

Estou de volta amigos,

Aproveitei o tempo off para estudar mais a fundo sobre o hack..

 

Instalei na minha maquina novamente o ML  10.8.2 retail e atualizei o mesmo para o 10.8.5

Instalei as kexts nullcpupowermanagement, fake, voodohda e o da internet.

 

Agora queria proceder com o dsdt, utilizo o mesmo que voce me passou ai em cima arthur?

 

 

Coloco a dsdt, removo a nullcpu marco P e C states e reinicio?

 

Segue foto da kextstat

TP7FFWR.png

lAgKthB.png

 

segue bdmseg

 

 

Chameleon 2.2svn (svn-r2283) [2013-12-11 00:11:43]
msr(536): ia32_perf_stat 0x06000922
max: 9 current: 9
CPU: Brand String:             Intel® Core2 Quad CPU    Q6600  @ 2.40GHz
CPU: Vendor/Family/ExtFamily:  0x756e6547/0x6/0x0
CPU: Model/ExtModel/Stepping:  0xf/0x0/0xb
CPU: MaxCoef/CurrCoef:         0x9/0x9
CPU: MaxDiv/CurrDiv:           0x0/0x0
CPU: TSCFreq:                  2397MHz
CPU: FSBFreq:                  266MHz
CPU: CPUFreq:                  2397MHz
CPU: NoCores/NoThreads:        4/4
CPU: Features:                 0x0000024f
Read HFS+ file: [hd(0,1)/System/Library/CoreServices/SystemVersion.plist] 478 bytes.
Read HFS+ file: [hd(0,1)/Extra/org.chameleon.Boot.plist] 427 bytes.
Module 'Symbols.dylib' by 'Chameleon' Loaded.
Description: Chameleon symbols for linking
Version: 0
Compat:  0
Read HFS+ file: [hd(0,1)/Extra/modules/Keylayout.dylib] 13424 bytes.
Module 'Keylayout.dylib' by 'Unknown' Loaded.
Description: 
Version: 0
Compat:  0
 
Darwin/x86 boot v5.0.132 - Chameleon v2.2svn r2283
Build date: 2013-12-11 00:11:43
4030MB memory
VESA v3.0 14MB (NVIDIA)
Scanning device 80...Press any key to enter startup options.(5) Use keys to select the startup volume.    hd(0,1) OSX                             
    hd(0,2) Windows NTFS                    
    hd(0,3) Arquivos                        
Press Enter to start up Darwin/x86 with no options, or you can:
  Type -v and press Enter to start up with diagnostic messages
  Type ? and press Enter to learn about advanced startup options
 
boot: Read HFS+ file: [hd(0,1)/Library/Preferences/SystemConfiguration/com.apple.Boot.plist] 232 bytes.
Read HFS+ file: [hd(0,1)/Extra/org.chameleon.Boot.plist] 427 bytes.
Loading Darwin 10.8
Loading kernel cache /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
Read HFS+ file: [hd(0,1)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 4096 bytes.
Read HFS+ file: [hd(0,1)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 16827643 bytes.
Read HFS+ file: [hd(0,1)/Extra/DSDT.aml] 15635 bytes.
Using PCI-Root-UID value: 0
PNY GeForce GTX 550 Ti 1536MB NVcf [10de:1244]-[196e:089c] :: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) device number: 1
Read HFS+ file: [hd(0,1)/Extra/smbios.plist] 701 bytes.
Intel P965/G965 DRAM Controller [8086:29a0] at 00:00.0
Frequency detected: 266 MHz (532) Dual Channel 
CAS:10 tRC:15 tRP:15 RAS:31 (10-15-15-31)
SMBus CmdReg: 0x3
Scanning SMBus [8086:283e], mmio: 0xee326000, ioport: 0x3000, hostc: 0x1
SPD[0] (size): 128 @0x50
Slot: 0 Type 19 1024MB (DDR2 SDRAM) 533MHz Vendor=Kingston
      PartNo=9905316-056.A01LF SerialNo=4C3ABA4C
SPD[0] (size): 128 @0x51
Slot: 1 Type 19 1024MB (DDR2 SDRAM) 533MHz Vendor=Kingston
      PartNo=9905316-005.A04LF SerialNo=A5237D3F
SPD[0] (size): 128 @0x52
Slot: 2 Type 19 2048MB (DDR2 SDRAM) 533MHz Vendor=Kingston
      PartNo=2G-UDIMM SerialNo=A12AA277
SPD[0] (size): 255 @0x53
SPD[0] (size): 255 @0x54
SPD[0] (size): 255 @0x55
SPD[0] (size): 255 @0x56
SPD[0] (size): 255 @0x57
CPU is Intel® Core2 Quad CPU    Q6600  @ 2.40GHz, family 0x6, model 0xf
 
Type: 4, Length: 35, Handle: 0x0
ProcessorInformation:
socketDesignation: J1PR
processorType: 3
processorFamily: 0xBB
manufacturer: Intel® Corporation
processorID: 0x6FB
processorVersion: Intel® Core2 Quad CPU    Q6600  @ 2.40GHz
externalClock: 266MHz
maximumClock: 2397MHz
currentClock: 2400MHz
serialNumber: Sˇ
assetTag: Sˇ
partNumber: Sˇ
 
Type: 7, Length: 19, Handle: 0x1
Type: 7, Length: 19, Handle: 0x2
Type: 7, Length: 19, Handle: 0x3
Type: 0, Length: 24, Handle: 0x4
BIOSInformation:
vendor: Apple Computer, Inc.
version: MP31.88Z.006C.B05.0802291410
releaseDate: 02/29/08
 
Type: 1, Length: 27, Handle: 0x5
SystemInformation:
manufacturer: Apple Computer, Inc.
productName: MacPro3,1
version: 1.0
serialNumber: CK914852XYL
uuid: 36A7D880-150D-11DC-92FA-00E018A3297B
wakeupReason: 0x6
skuNumber: Sˇ
family: Mac Pro
 
Type: 2, Length: 20, Handle: 0x6
BaseBoard:
manufacturer: Apple Inc.
product: Mac-F42C88C8
version: AAD41692-308
serialNumber: BQWH723003Z6
assetTagNumber: Base Board Asset Tag
locationInChassis: Base Board Chassis Location
boardType: 0x1
 
Type: 3, Length: 17, Handle: 0x7
SystemEnclosure:
manufacturer:                                 
type: 3
version:                         
serialNumber:                                 
assetTagNumber:                                 
 
Type: 8, Length: 9, Handle: 0x8
Type: 8, Length: 9, Handle: 0x9
Type: 8, Length: 9, Handle: 0xa
Type: 9, Length: 13, Handle: 0xb
Type: 9, Length: 13, Handle: 0xc
Type: 9, Length: 13, Handle: 0xd
Type: 9, Length: 13, Handle: 0xe
Type: 9, Length: 13, Handle: 0xf
Type: 9, Length: 13, Handle: 0x10
Type: 9, Length: 13, Handle: 0x11
Type: 10, Length: 6, Handle: 0x12
Type: 10, Length: 6, Handle: 0x13
Type: 10, Length: 6, Handle: 0x14
Type: 13, Length: 22, Handle: 0x15
Type: 32, Length: 20, Handle: 0x16
Type: 16, Length: 15, Handle: 0x17
Type: 17, Length: 27, Handle: 0x18
MemoryDevice:
deviceLocator: J1MY
bankLocator: CHAN A DIMM 0
memoryType: DDR2 SDRAM
memorySpeed: 533MHz
errorHandle: ffff
manufacturer: Kingston
serialNumber: 4C3ABA4C
assetTag: Unknown
partNumber: 9905316-056.A01LF
 
Type: 20, Length: 19, Handle: 0x19
Type: 17, Length: 27, Handle: 0x1a
MemoryDevice:
deviceLocator: J2MY
bankLocator: CHAN A DIMM 1
memoryType: DDR2 SDRAM
memorySpeed: 533MHz
errorHandle: ffff
manufacturer: Kingston
serialNumber: A5237D3F
assetTag: Unknown
partNumber: 9905316-005.A04LF
 
Type: 20, Length: 19, Handle: 0x1b
Type: 17, Length: 27, Handle: 0x1c
MemoryDevice:
deviceLocator: J3MY
bankLocator: CHAN B DIMM 0
memoryType: DDR2 SDRAM
memorySpeed: 533MHz
errorHandle: ffff
manufacturer: Kingston
serialNumber: A12AA277
assetTag: Unknown
partNumber: 2G-UDIMM
 
Type: 20, Length: 19, Handle: 0x1d
Type: 17, Length: 27, Handle: 0x1e
MemoryDevice:
deviceLocator: J4MY
bankLocator: CHAN B DIMM 1
memoryType: DDR2 SDRAM
memorySpeed: 0MHz
errorHandle: ffff
manufacturer: N/A
serialNumber: N/A
assetTag: NO DIMM
partNumber: N/A
 
Type: 19, Length: 15, Handle: 0x1f
Type: 187, Length: 9, Handle: 0x20
Type: 187, Length: 9, Handle: 0x21
Type: 187, Length: 9, Handle: 0x22
Type: 136, Length: 6, Handle: 0x23
Type: 131, Length: 6, Handle: 0x23
AppleProcessorType:
ProcessorType: 0x501
 
Type: 127, Length: 4, Handle: 0x24
 
Customizing SystemID with : 36a7d880-150d-11dc-92fa-00e018a3297b
Read HFS+ file: [hd(0,1)/Extra/DSDT.aml] 15635 bytes.
ACPI Table not found: SSDT.aml
FADT: ACPI Restart Fix applied!
FADT: Using custom DSDT!
Read HFS+ file: [hd(0,1)/Extra/Extensions/AppleACPIPS2Nub.kext/Contents/Info.plist] 1743 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/ApplePS2Controller.kext/Contents/Info.plist] 1788 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Keyboard.kext/Contents/Info.plist] 1763 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Mouse.kext/Contents/Info.plist] 1729 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Trackpad.kext/Contents/Info.plist] 3772 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/FakeSMC.kext/Contents/Info.plist] 4564 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/Intel82566MM.kext/Contents/Info.plist] 2045 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/lspcidrv.kext/Contents/Info.plist] 1299 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/NullCPUPowerManagement.kext/Contents/Info.plist] 1498 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/Patched_10.7_AppleRTC.kext/Contents/Info.plist] 1961 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/AppleACPIPS2Nub.kext/Contents/MacOS/AppleACPIPS2Nub] 4096 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/AppleACPIPS2Nub.kext/Contents/MacOS/AppleACPIPS2Nub] 38224 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/ApplePS2Controller.kext/Contents/MacOS/ApplePS2Controller] 4096 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/ApplePS2Controller.kext/Contents/MacOS/ApplePS2Controller] 54992 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Keyboard.kext/Contents/MacOS/ApplePS2Keyboard] 4096 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Keyboard.kext/Contents/MacOS/ApplePS2Keyboard] 36840 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/FakeSMC.kext/Contents/MacOS/FakeSMC] 4096 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/FakeSMC.kext/Contents/MacOS/FakeSMC] 76688 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/Intel82566MM.kext/Contents/MacOS/Intel82566MM] 4096 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/Intel82566MM.kext/Contents/MacOS/Intel82566MM] 129008 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/NullCPUPowerManagement.kext/Contents/MacOS/NullCPUPowerManagement] 4096 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/NullCPUPowerManagement.kext/Contents/MacOS/NullCPUPowerManagement] 33240 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/Patched_10.7_AppleRTC.kext/Contents/MacOS/AppleRTC] 4096 bytes.
Read HFS+ file: [hd(0,1)/Extra/Extensions/Patched_10.7_AppleRTC.kext/Contents/MacOS/AppleRTC] 62232 bytes.
Starting Darwin x86_64
Boot Args: boot-uuid=2457C343-C090-3E9A-B895-000BB584880B rd=*uuid 
 
Link to comment
Share on other sites

Estou satisfeito com meu hack, apesar da questão da gestão de energia estar difícil de configurar..

 

Com o update para o 10.8.5 o fps aumento absurdamente em jogos como o dota2

 

Internet,som,video tudo 100%..

 

 

Queria saber, qual a desvantagem a longo prazo se eu deixar habilitado a nullcpu?

 

Desabilitei ela aqui reiniciei e deu freeze :/

Link to comment
Share on other sites

Olá

 

Usar a Null traz algumas consequencias, mas demora pra trazer na realidade.

 

Se retirou a null e deu pau é porque o gerenciamento de energia pelo bootloader está mal configurado e por enquanto é melhor ter alguma coisa gerenciando a energia como a NullCPUPM do que ter um falso gerenciamento pelo bootloader.

 

Continua com a NullCPUPM

Link to comment
Share on other sites

O gerenciamento pelo bootloader atualmente está assim (com a nullcpu)..

 

jQ2s2iW.png

 

Quando eu retiro a kext null eu marco no bootloader generate P e C states 

reinicio ai da freeze..

 

Uma outra coisa..

O aplicativo HWmonitor só está monitorando a temperatura do hd, que atualmente está em 25º após 3hrs de uso, está normal?

Link to comment
Share on other sites

 Share

×
×
  • Create New...