Jump to content
InsanelyMac Forum
laurentdrk13

ATI Mobility Radeon HD 5650/5750/ 6550M Mountain Lion 10.8

Recommended Posts

Hi everyone,

 

So I've installed Mountain Lion(10.8) on my HP DV7-4180eb laptop (http://h10025.www1.h...cname=c02541743).

I posted this topic because I'm searching for more than a week how to install the drivers for my graphic card.

 

For booting I'm using "Chameleon 2.2 - r2233"

I've already type my EDID in "DisplayProductID-717" and put my vendorID(1002) and deviceID(0x68c1) in the ATI5000Controller.kext.

Extra/org.chameleon.Boot.plist:

- GraphicsEnabler = Yes

- Ati config = Baboon

 

But still no reconized my Graphic Card and we don't see the other kext in the System Info

 

Hope you can help me

Thanks

post-1170276-0-81174600-1369098129_thumb.jpg

Share this post


Link to post
Share on other sites
Advertisement

Maybe Chameleon does not have your device-id? Thus card is not recognized at all.. In such case you have to add it and recompile Chameleon. Alternatively you can use DSDT injection to enable the card. Then you don't have to worry about card id in Chameleon and

DisplayProductID-717

;)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Posts

    • Good evening to all. So, I have an external 1TB seagate HD and it always reads normally, but now when I plug it into my HACK it just does not read, it does not even appear on the disk utility. The light always turns blue from the HD without blinking. However I plugged it into windows, on a macbook and it worked normally. I already formatted my hack but it did not work. Thank you in advance for the help and sorry my bad english   my kexts: AppleALC.kext FakeSMC.kext IntelGraphicsFixup.kext IntelMausiEthernet.kext Lilu.kext WhateverGreen.kext VoodooHDA.kext USBInjectAll.kext NvidiaGraphicsFixup.kext   GTX 1080 Windforce core i5 7º generation 8gb Ram H170M Plus BR    
    • WOL packet is reaching the machine from LAN and from WAN (set with port forwarding), tested with "nc -l -u 9".
    • For me the forum seems reasonably OK, except whenever I see the word 'LOADING' - like when clicking another page of a thread - when it just stops completely and never returns.   I use an adblocker, so adverts aren't slowing me down.  Browsing the forum indexes is not too bad, as is clicking to view any thread.  Ditto clicking a link in an email notification to go to a particular post in a thread.  Sometimes it takes maybe five seconds to load a page, which is a bit too long.  But it's not terrible.   But then whenever I click on any other thread page, which tries to do the in-page content load (without a full page refresh), I see LOADING and then nothing further happens, even after minutes.   It's definitely not related to which content is loaded, but rather how it is loaded.  For example if I go to the index for this forum, then click directly to page 11 of this thread, it loads in 1-5 seconds.  But if I click the link to page 11 within the thread, it never comes back.  I just see this, forever:     This stuck issue seems to me likely something broken (code or configuration?) rather than a general slowdown.  But maybe there's also a general slowdown, especially for those who are seeing adverts.
    • This is as far as I can get with the AMD kexts and the device ID added. They load but the frame buffer isn't loaded. I've tried loading all 7 frame buffers included in the X1000 kext with no luck. From the tests Gigamaxx did there seems to be more luck spoofing as Intel graphics there. More support may come from integrated Vega though, hard to tell.    
    • as documented here it is a sample rate standard and i have also tested it and i can confirm that it works with my audigy rx at least, i have to test it with other cards   https://github.com/audiojs/sample-rate


×