Jump to content
Sign in to follow this  
Andrej Soroj

Сompatibility of components

2 posts in this topic

Recommended Posts

Hi, guys!

 

I have core i3-3225(with hd4000 onboard) processor and I'm going to buy other components and install Mountain Lion. But I'm new and not sure that all component compatible to 10.8. my spec:

 

Processor: Core i3-3225(HD4000)

Motherboard: ASUS P8B75-M (B75 chipset)

Memory: Corsair Value Select 2x8Gb - 1333 or Kingston HyperX 2x8Gb - 1600

Drive: Seagate Barracuda 2Tb [ST2000DM001] or WD Caviar Green IntelliPower 2Tb [WD20EZRX]

Without graphic card

 

 

 

Please check my configuration and give me advice if something incompatible.

Share this post


Link to post
Share on other sites
Advertisement

go to asus site get your spec sheet up look at it and get the lan and sound ids then put the ids in google (example. ALC883 KEXT for mountain lion)

im trying to show you how to help yourself.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MetalBreaker
      Hi,
      I noticed some weird behavior with macOS High Sierra. This system was working just fine on Sierra 10.12.5, until I decided to update to High Sierra (10.13.3). The upgrade process went mostly fine I guess, but it got stuck in an infinite spinning wheel which would just keep overlapping. I went into verbose mode, and sure enough, I found "IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0" repeating over and over along with ACM errors... I'm really lost right now. I can boot in recovery mode and safe mode just fine, when the graphics drivers aren't loaded. Web drivers aren't installed. I installed NvidiaGraphicsFixup, but it didn't fix the issue. I tried deleting the native graphics drivers from macOS and installing web drivers, but it didn't help.
      SMBIOS: iMac13,1
      Graphics card: ASUS GT630-2GD3 (It's a Fermi card and it needs injection, so I modified my DSDT. Full graphics acceleration worked in Sierra. No Clover injection. I tried using Clover injection instead, I saw no difference.)
      CPU: Intel Core i3-3210, iGPU disabled in UEFI

      All kexts updated to their latest versions, along with Clover.



      For more info, you can refer to the GitHub issue where I posted it. https://github.com/lvs1974/NvidiaGraphicsFixup/issues/3
      Any help would be appreciated.
      Thank you for your time!
      config.plist
    • By oliveiro
      I know veterans from the hackintosh community claimed that Intel HD 2500 is not supported and doesn't work, but mine (mobile version) works with High Sierra, as it did back with every versions since Mountain Lion.
       
      I formerly started a topic here for ElCapitan : http://www.insanelymac.com/forum/topic/316981-intel-hd-graphics-ivy-b-hd-2500-qeci-for-osx-1011/
       
      This should apply to any laptop with following CPU (mobile Ivy Bridge)
       
      Intel Pentium 2030M, Intel Pentium 2020M, Intel Celeron 1020E, Intel Celeron 1020M, Intel Pentium 2127U, Intel Celeron 1005M, Intel Pentium 2117U, Intel Celeron 1000M, Intel Celeron 1037U, Intel Celeron 1017U, Intel Celeron 1007U, Intel Celeron 1047UE, Intel Pentium 2129Y, Intel Celeron 1019Y, Intel Celeron 927UE
       
      I guess following Desktop CPUs owners should be able to make it work (It probably requires DSDT edits to enable the proper output, on my laptop I only use and tested LVDS)
       
      Intel Core i5-3550, Intel Core i5-3470, Intel Core i3-3220
       
       
       
       
      My Laptop is an Asus (F301A-RX229H) with an Intel Pentium Mobile 2020M, which includes an Intel HD Graphics, not labelled 2500, but it has 6 execution Units like the 2500, and approximately same clock settings (650-1100) instead of 650-1150 for HD2500. You can check specs here and here. Most importantly, it is identified by bootloader and MacOsX/macOS as "Intel HD Graphics 2500" and uses HD4000 kexts.

      Few Graphic Glitches (windows title bar, dock...) solved by reducing transparency in Accessibility Preferences Panel.











    • By Onestyle
      THIS IS STILL WORK IN PROGRESS
      Laptop : Sony Vaio- SVE1712W1EB



       
       
      OSX version : 10.13 - High Sierra - SMBIOS - MacBookPro9,1
       
      Motherboard : Intel HM76 Express
      DSDT FIX :



      Show Fan RPM's : Updated,now working with Latest Istat Menus and HWMonitor 



      CPU : i7 - 3632QM (2.2Ghz- 3.2Ghz) :



      Dedicated Graphics : AMD Radeon HD 7650M 2048MB 
      Full QE/CI and Resolution: 


      Fix gradient issue with AMD Graphics the fast way :


      Fix Brightness issue + brightness fn keys:


       
      Fix sleep issue  and naming issue with AMD Graphics :


       
      Integrated Graphics : Intel HD Graphics 4000 (can't be enabled in bios,no option)

      Touchpad and Keyboard :



      Wifi : AR9485 : 



      Ethernet : Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller : Works out of the box

      Sound : Realtek ALC269 -VC1 : 



      Battery: Works after patching : 





      Built-in Camera :




       
       

      OSX version : 10.12 - Sierra - SMBIOS - MacBookPro9,1
      Motherboard : Intel HM76 Express
      DSDT FIX :



      Show Fan RPM's : Updated,now working with Latest Istat Menus and HWMonitor 



      CPU : i7 - 3632QM (2.2Ghz- 3.2Ghz) :



      Dedicated Graphics : AMD Radeon HD 7650M 2048MB
      Full QE/CI and Resolution:


      Fix gradient issue with AMD Graphics the fast way :


      Fix Brightness issue + brightness fn keys:



      Integrated Graphics : Intel HD Graphics 4000 (can't be enabled in bios,no option)

      Touchpad and Keyboard :



      Wifi : AR9485 :



      Ethernet : Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller : Works out of the box

      Sound : Realtek ALC269 -VC1 :



      Battery: Works after patching :





      Built-in Camera :






      OSX version : 10.11.6 - El Capitan - SMBIOS - MacBookPro9,1

      Motherboard : Intel HM76 Express
      DSDT FIX :



      Show Fan RPM's : Updated,now working with Latest Istat Menus and HWMonitor 



      CPU : i7 - 3632QM (2.2Ghz- 3.2Ghz) :



      Dedicated Graphics : AMD Radeon HD 7650M 2048MB
      Full QE/CI and Resolution:


      Fix gradient issue with AMD Graphics the fast way :


      Fix Brightness issue + brightness fn keys:



      Integrated Graphics : Intel HD Graphics 4000 (can't be enabled in bios,no option)

      Touchpad and Keyboard :



      Wifi : AR9485 :



      Ethernet : Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller : Works out of the box

      Sound : Realtek ALC269 -VC1 :



      Battery: Works after patching :





      Built-in Camera :





      UPDATED : October 9. 2016.
    • By hornpipe2
      I have a Mac Mini 2006 (upgraded) with Intel GMA950 graphics, running MLPostFactor 10.8.5.  It is connected to an ASUS VS197 LCD panel using DVI-D.  This is natively a 1366x768 panel that is recognized and works fine.
       
      However, the other choices for resolution are 4:3 800x600 and 1024x768, and then the oddballs 832x624 and 1360x768.  None of these are useful as a low-resolution widescreen for gaming or watching DVD content.  Specifically I want to get access to 848x480 or 854x480, and also 1024x576.  SwitchResX makes these choices available, but it doesn't work with a "full screen" game, presumably because the game directly queries OSX Display to get a list of valid resolutions and SwitchResX is bypassing that system instead.
       
      So the solution is obvious: buy a new computer pull the monitor's EDID data, hack it to enable new resolutions, and then tell OSX to use this custom EDID instead of the one retrieved from the monitor.
       
      Following the steps of the EDID injection guide, here is where I am:
       
      * Retrieve EDID, DisplayVendorID etc from ioreg.
      00 FF FF FF FF FF FF 00 04 69 F2 19 24 94 00 00 31 16 01 03 80 29 17 78 EA F5 45 A4 55 50 9E 27 0F 50 54 BD EE 00 81 C0 01 01 01 01 01 01 01 01 01 01 01 01 01 01 66 21 56 AA 51 00 1E 30 46 8F 33 00 9A E6 10 00 00 1E 00 00 00 FD 00 32 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 41 53 55 53 20 56 53 31 39 37 0A 20 20 00 00 00 FF 00 43 43 4C 4D 54 46 30 33 37 39 32 34 0A 00 F1 * Use an EDID editor to enable new 848x477 and 1024x576 resolutions.  (Verify with an online EDID tool, and compare to the previous version)
      00 FF FF FF FF FF FF 00 04 69 F2 19 24 94 00 00 31 16 01 03 80 29 17 78 EA F5 45 A4 55 50 9E 27 0F 50 54 BD EE 00 81 C0 4B C0 4B CA 4B CF 61 C0 61 CA 61 CF 01 01 66 21 56 AA 51 00 1E 30 46 8F 33 00 9A E6 10 00 00 1E 00 00 00 FD 00 32 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 41 53 55 53 20 56 53 31 39 37 0A 20 20 00 00 00 FF 00 43 43 4C 4D 54 46 30 33 37 39 32 34 0A 00 47 * Create a new subfolder and plist within /System/Library/Overrides/Display/ containing the new EDID string and monitor name.
      * Reboot.
       
      Now the problems begin.  Even though the plist file is being read (which I know because the Monitor Name has changed in Displays), the custom EDID is not being used.  When I dig into IORegExplorer I am able to come up with AAPL00,EDID string and it is the unmodified one read from the monitor.  I even tried a plug-and-unplug while OSX is running, and also tried to reset the SMC and NVRAM, but no dice.
       
      Do I need to start digging into DSDT hacking?  Is the Intel driver pulling down EDID during boot and I need to override it somewhere else?  What am I missing here?
    • By DaniiSwan
      Hello,
       
      I've been attempting for the past few days to install OS X Mountain Lion on my Lenovo Thinkpad Edge E530 with little success. So much so that I've finally decided I'm probably out of ideas and created this forum post requesting help.
       
      My Laptop Specs are:
       
      Intel Core i3-2328m (Sandy Bridge CPU at 2.2GHZ with support for SSE2 , SSE3 and SSSE3)
      8GB RAM
      500GB Hitachi Z7K500 HDD
      Lenovo 627226G Motherboard (Intel HM77 Chipset)
      Intel HD Graphics 3000
       
      More Detailed Specs ---> https://drive.google.com/open?id=0B-GXUa1I8xyDZU1SdklDSlhER2c
       
      So far , I've attempted to install iAtkos ML2 and ML3U via USB and so far both have worked up until the first sighting of the apple logo then the laptop restarted. In both cases , I was using a separate USB with chameleon bootloader on but in the instance where I tried to use the onboard bootloader on ML3U , I hit enter and the screen simply remained black.
       
      Any help would be much appreciated
       
      Thank you for your time.
×