Hi there, I noticed that my system cannot sleep properly, so I run pmset.
Here are the results. The strange thing is that I got "sleep 0 (sleep prevented by mds)". What does it mean? Do you think that all other parameters are good to go?
Recently I managed to fix reboot on shutdown. Maybe its linked with that.
iMac:~ diego$ pmset -g
System-wide power settings:
Currently in use:
Sleep On Power Button 1
sleep 0 (sleep prevented by mds)
I got my Hackintosh up and running since yesterday. I followed this topic
and used @MaLd0n 's CLOVER.zip files for kext installation and for the included SSDT's and DSDT. Massive thanks for that btw.
The only *slight* problem I still have is when I have XMP set to profile 1 in the Gigabyte BIOS, and I put my Hackintosh to sleep and I wake it up, I get the message that all USB drives were not ejected properly.
I really don't understand what's causing this problem. I currently have disabled XMP in the BIOS and the USB drives are not getting ejected when my Hack wakes from sleep.
I use 16GB of Corsair DDR4 Vengeance ram which goes up to 3000MHz. I have XMP profile in CLOVER set to 1. About this Mac reports that my RAM speed is 2998 Mhz. I have a separate SSD drive with Windows on it and I do not think it utilises the full MHz of the RAM because XMP is disabled.
Notebook Asus X550VX i7 - 7700hq
GTX950MX - UHD630
A1718086 - 025510ec ALC255 that works only on VoodooHDA
1. White Screen Wake up
EDID not a asolution
IOREG output http://www.mediafire.com/file/u7odzbaxa7bbb6a/ioregSaved.txt and EDID http://www.mediafire.com/file/hqlapgf4luwchdf/DisplayProductID-69c.plist
2. Battery info status bar sometimes goes on / off like battery has off
3. Crackle Sound using earphone using VoodooHDA
Still investigation using patched iomatch voodooha info.plist
The sound card can’t be using AppleALC, no sound came out using layout 3, 13, 17, 18, 27, 28, 99
I have (Mald0n) DSDT
thank you for maldon for helping me
I recently set up my hackintosh. Everything else works fine, the only issue is my monitor cannot come back from sleep.
If I click the "sleep" menu manually, the system goes to sleep fine. After the system sleeps for a while (more than a few mins, I guess it's called "deep sleep"), when I try to wake it up, the monitor wakes up but stays black screen. The machine is on.
If I leave the system to time out and sleep by itself, only the monitor goes off; when I try to wake it up, same symptom as above.
What I have tried (but none worked):
additional boot flag: ngfxpatch=pikera
additional boot flag: darkwake = 0
Motherboard: Gigabyte Z77x-UD5H
CPU: Ivy Bridge i5-3570K CPU @ 3.40GHz (quad core)
Graphics: Nvidia GTX 1050
Monitor: Dell P2715Q @ 4k / 60Hz, Display Port
Wifi / Bluetooth: BCM94360CS with PCIE
Onboard GPU: disabled
OS: High Sierra 10.13.3
Please see attached for following files:
EFI zip file: https://www.dropbox.com/s/8nun37msu9b1bva/EFI.zip?dl=0
I generated my own SSDT.aml using ssdtPRGen.sh;
Other SSDT patches are copied from this repository: https://github.com/VoiletDragon/Z77X-UD5H-Clover-Hotpatch-Patches
ioreg dump: https://www.dropbox.com/s/5a10k82guczaaws/macchiato.ioreg.zip?dl=0
result from following command: https://www.dropbox.com/s/0b22qcw79ovnjdg/kext-touch.txt.zip?dl=0
kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda
sudo touch /System/Library/Extensions && sudo kextcache -u /
I am looking forward to your suggestions. Thanks.