marsuss Posted August 20, 2012 Share Posted August 20, 2012 Hi all. Fully working Intel HD3000 with QE/CI . :-D 1. Delete all graphics kexts (AppleIntelHD3000, AppleIntelHD4000, AppleIntelHDGraphics, NVIDIA, ATI, GeForce, Natit, NVDAGF100Hal, NVDAResman) etc. 2. Repair permissions, rebuild cache (use kext wizard). 3. Install attached kexts. 4. Repair permissions, rebuild cache (use kext wizard). 5. Restart. That's it. https://www.dropbox.com/s/v3ybzzh2snb6wcs/HD3000.zip 3 Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/ Share on other sites More sharing options...
TUX FIRE Posted August 20, 2012 Share Posted August 20, 2012 i have native QE/CI with the same HD3000 (0x0126) on ML, what the difference btw your kexts and the vanilla one ? Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1845883 Share on other sites More sharing options...
C.Frio Posted August 20, 2012 Share Posted August 20, 2012 Hi... could you specify the kexts of "etc", at "1. Delete all graphics kexts (AppleIntelHD3000, AppleIntelHD4000, AppleIntelHDGraphics, NVIDIA, ATI, GeForce, Natit, NVDAGF100Hal, NVDAResman) etc." thank you c.frio Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1845886 Share on other sites More sharing options...
TUX FIRE Posted August 21, 2012 Share Posted August 21, 2012 Delete all graphics kexts (+ plugin and bundles) : AMD - AMDRadeonAccelerator.kext - AMDRadeonVADriver.bundle - AMDRadeonX3000GLDriver.bundle INTEL - AppleIntelHD3000Graphics.kext - AppleIntelHD3000GraphicsGA.plugin - AppleIntelHD3000GraphicsGLDriver.bundle - AppleIntelHD3000GraphicsVADriver.bundle - AppleIntelHD4000Graphics.kext - AppleIntelHD4000GraphicsGA.plugin - AppleIntelHD4000GraphicsGLDriver.bundle - AppleIntelHD4000GraphicsVADriver.bundle - AppleIntelHDGraphics.kext - AppleIntelHDGraphicsFB.kext - AppleIntelHDGraphicsGA.plugin - AppleIntelHDGraphicsGLDriver.bundle - AppleIntelHDGraphicsVADriver.bundle - AppleIntelIVBVA.bundle - AppleIntelSNBGraphicsFB.kext - AppleIntelSNBVA.bundle ATI - ATI2400Controller.kext - ATI2600Controller.kext - ATI3800Controller.kext - ATI4600Controller.kext - ATI4800Controller.kext - ATI5000Controller.kext - ATI6000Controller.kext - ATIFramebuffer.kext - ATIRadeonX2000.kext - ATIRadeonX2000GA.plugin - ATIRadeonX2000GLDriver.bundle - ATIRadeonX2000VADriver.bundle - ATISupport.kext Nvidia - GeForce.kext - GeForceGA.plugin - GeForceGLDriver.bundle - GeForceVADriver.bundle - NVDAGF100Hal.kext - NVDAGK100Hal.kext - NVDANV50Hal.kext - NVDAResman.kext - NVSMU.kext 2 Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1845898 Share on other sites More sharing options...
C.Frio Posted August 21, 2012 Share Posted August 21, 2012 Hi.. Thanks... I'll try... c.frio Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1845972 Share on other sites More sharing options...
X-TRiAL Posted August 21, 2012 Share Posted August 21, 2012 i have native QE/CI with the same HD3000 (0x0126) on ML, what the difference btw your kexts and the vanilla one ? I would like to know this too, however sometimes I get a graphics glitch (see picture) Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1845973 Share on other sites More sharing options...
TUX FIRE Posted August 21, 2012 Share Posted August 21, 2012 But i don't have any glitches !!, i'm using the 8,1 smbios i can also use the Mac mini (5,1 ?) smbios. Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1845987 Share on other sites More sharing options...
The Real Deal Posted August 21, 2012 Share Posted August 21, 2012 marsus, which cable do you use to plug your monitor ? DVI ? HDMI ? Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1846008 Share on other sites More sharing options...
marsuss Posted August 21, 2012 Author Share Posted August 21, 2012 marsus, which cable do you use to plug your monitor ? DVI ? HDMI ? I have a laptop toshiba satellite c855-14u. Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1846036 Share on other sites More sharing options...
C.Frio Posted August 21, 2012 Share Posted August 21, 2012 i have native QE/CI with the same HD3000 (0x0126) on ML, what the difference btw your kexts and the vanilla one ? hi... so... and wich are yours Tux Fire ? the vanilla one? the one I should remove? c.frio Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1846132 Share on other sites More sharing options...
TUX FIRE Posted August 24, 2012 Share Posted August 24, 2012 I don't understand, what you mean exactly ? Well if you talk about working kext, both of them works fine for me Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1847178 Share on other sites More sharing options...
marsuss Posted August 27, 2012 Author Share Posted August 27, 2012 however sometimes I get a graphics glitch (see picture) Install latest chameleon 2050 Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1848278 Share on other sites More sharing options...
Biso007 Posted September 28, 2012 Share Posted September 28, 2012 Hi, does it support dual monitors ? I have native resolution but it doesn't recognize the external monitor. Edit: Yes it does Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1856509 Share on other sites More sharing options...
Mieze Posted September 29, 2012 Share Posted September 29, 2012 I found a way to eliminate the need to patch or delete any kexts by adding a simple DSDT-patch. The patch was tested with a MSI B75MA-P45 but should work on any B75, H77 and Z77 equipped board using an AMI BIOS in combination with a Sandybridge CPU. Under Scope (_SB.PCI0) you'll have to add device IMEI: Insert the following code sequence: Device (IMEI) { Name (_ADR, 0x00160000) Method (_STA, 0, NotSerialized) { Return (0x0F) } Method (_DSM, 4, Serialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x3A, 0x1C, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Compile, save and install the DSDT. After rebooting verify that the patch is working. Open IORegistryExplorer and locate device IMEI. Verify that the AppleIntelMEIDriver is loaded and attached to the device. Good luck! Mausi 4 Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1856893 Share on other sites More sharing options...
Biso007 Posted October 18, 2012 Share Posted October 18, 2012 I finally restored the QE/CI on my laptop ... I patched the stock 10.8.2 AppleIntelSNBGraphicsFB kext to enable the VGA output on port 602 (credit to bcc9). Now I have both displays working with QE/CI. I attached the patched kext in case you give it a try. AppleIntelSNBGraphicsFB.kext.zip 2 Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1861364 Share on other sites More sharing options...
deathanarchist2 Posted November 2, 2012 Share Posted November 2, 2012 This is great just what i was looking for. Its all working now except for hdmi output, and advice on enabling this i use it quite a bit normally. Edit: after 10.8.2 update hdmi out works! Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1864494 Share on other sites More sharing options...
pessott Posted November 19, 2012 Share Posted November 19, 2012 Are they supposed to work on 1.7.2 too? My situation is this: http://www.insanelymac.com/forum/topic/284460-hd3000-gt640-optimus-intel-not-recognized/ Thanks Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1867729 Share on other sites More sharing options...
xcrash Posted November 27, 2012 Share Posted November 27, 2012 In the DSDT Patch "device-id" I need write my device id (0x01168086) or I need write "device-id"? Thanks I tried with DSDT Patch and not works with me (maybe I'm wrong with device-id), I installed kext attached and I have full resolution (1366x768) and Duplicate Screen, All works but I don't have Acceleration yet. I have glitches on notification bar, I dont have translucent bar and launchpad works very bad. ¿Any ideas? Greetings, :/ Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1869352 Share on other sites More sharing options...
Biso007 Posted November 29, 2012 Share Posted November 29, 2012 You don't need patched DSDT for this to work. Just make sure you update to 10.8.2 and use SMBios.plist for MacBookPro8,1 and boot with GraphicsEnabler=Yes Just to be sure, remove all graphics related kexts except AppleIntelSNBGraphicsFB.kext. Plz put a screen shot for Graphics/Display in System Profile Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1869754 Share on other sites More sharing options...
ajinkya428 Posted December 12, 2012 Share Posted December 12, 2012 i'm having same issue . I've native full resolution with intel hd3000 but no translucent menubar and ripple effect? Pls help Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1872900 Share on other sites More sharing options...
Biso007 Posted December 12, 2012 Share Posted December 12, 2012 what's your OS version ? Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1872913 Share on other sites More sharing options...
ajinkya428 Posted December 12, 2012 Share Posted December 12, 2012 i'm having os x 10.8.2 with hp pavilion dv6 6165tx . I got my intel hd card detected with 512mb support. Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1872937 Share on other sites More sharing options...
Biso007 Posted December 12, 2012 Share Posted December 12, 2012 Check list: - GraphicsEnabler=Yes in boot.plist - SMBios8,1 or 8,3 - AppleIntelSNBGraphicsFB.kext is loaded - Device ID is x0116 or x0126 Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1872952 Share on other sites More sharing options...
ajinkya428 Posted December 12, 2012 Share Posted December 12, 2012 i've smbios 8.1 with dev id 0116 also graphicsenabler=yes and appleintelsnbgraphicsfb kext loaded properly Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1872958 Share on other sites More sharing options...
Biso007 Posted December 12, 2012 Share Posted December 12, 2012 ok .. how did you test QE/CI ? What's you bootloader (Chameleon ?) .. which version ? Are you sure you ticked the translucent menu bar option in systems preferences /desktop ? Can you put a screen shot with your issue ? Link to comment https://www.insanelymac.com/forum/topic/282045-hd3000-full-acceleration-for-108/#findComment-1872963 Share on other sites More sharing options...
Recommended Posts