Ati HD5450 and HDMI

[arkstone]

Hi all!

 

I have Ati 5450 card, MSI R5450-MD512H/D2, I've managed to enable QE/CI with "GraphicsEnabler=Yes" and putting vendor/device id's into Info.plist in ATI5000Controller.kext / /ATIRadeonX3000.kext, everything works fine, but I can't enable HDMI port on this card. bdmesg from chimera (chimera v. 1.10) says:

 

TI Framebuffer Addr: @0xD0000000  MMIO Addr: @0xFBEE0000 I/O Port Addr: @0x0000D000 ROM Addr: @0xFBEC0000
ATI card POSTed, reading Video BIOS from legacy space
Card reported ports: 0
Framebuffer set to: <F3><EE> using device's default.
Number of ports set to: 0 using framebuffer's default.
ATI Radeon HD 5400 Series 512MB [1002:68f9] (subsys [1462:2173]) (Cedar:<F3><EE>) :: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)

 

kextstat:

 

bash-3.2# kextstat | grep -i ati

21 0 0xffffff7f81abd000 0x8000 0x8000 com.apple.nke.applicationfirewall (3.2.30) <7 6 5 4 3 1>

81 2 0xffffff7f81274000 0x18a000 0x18a000 com.apple.kext.ATISupport (7.1.8) <67 9 8 7 5 4 3 1>

82 0 0xffffff7f81753000 0x3e000 0x3e000 com.apple.kext.ATI5000Controller (7.1.8) <81 67 9 8 5 4 3 1>

86 0 0xffffff7f813fe000 0x29b000 0x29b000 com.apple.ATIRadeonX3000 (7.1.8) <72 67 9 7 6 5 4 3 1>

87 0 0xffffff7f8173c000 0x12000 0x12000 com.apple.kext.ATIFramebuffer (7.1.8) <81 67 9 8 7 5 4 3 1>

 

Is it even possible to enable HDMI output (I want to connect second monitor, but both monitors has only DVI inputs, and as card has DVI/VGA/HDMI - the only way to connect second monitor is to connect it via HDMI) on this card and if it possible - how can I do it?

[artur_pt]

hi

 

using another framebuffer , not the one u are using by default

 

AtiConfig=

 

good hack

[arkstone]

Artur-pt, yeah, that did it, tried AtiConfig=Vervet and everything works now. It just I've tried it before - but as I was using UseAtiRom it failed (later it became clear that I was using wrong rom file - that's why it failed - but now I'm no using rom file at all, so everything is fine), thanks!