Jump to content

arkstone

Members
  • Content count

    7
  • Joined

  • Last visited

About arkstone

  • Rank
    InsanelyMac Protégé
  1. arkstone

    VoodooHDA with fix for random KP

    Hi! I've installed 2.8.0, then 2.8.1 and now 2.8.2b6 - but still have a problem with volume - it's too low and volume knob in preferencepane does nothing. I have MSI H55M-P31 motherboard, my device id is: 0x3b568086, ioreg: bash-3.2# ioreg -d 1 -rn VoodooHDADevice +-o VoodooHDADevice <class VoodooHDADevice, id 0x10000028f, registered, matched, active, busy 0 (269 ms), retain 7> { "IOClass" = "VoodooHDADevice" "Boost" = 0 "AllowMSI" = Yes "VoodooHDAEnableMuteFix" = No "IOAudioDeviceName" = "VoodooHDADeviceaa68" "IOAudioDeviceModelID" = "VoodooHDA:aa68 " "IOAudioDeviceShortName" = "VoodooHDA " "NodesToPatch" = () "Noise" = 0 "VoodooHDAEnableHalfVolumeFix" = No "IOProviderClass" = "IOPCIDevice" "IOAudioDeviceManufacturerName" = "Voodoo " "IOAudioDeviceTransportType" = 1651274862 "IOPowerManagement" = {"DriverPowerState"=1,"MaxPowerState"=1,"CurrentPowerState"=1} "Vectorize" = No "IOProbeScore" = 0 "IOUserClientClass" = "VoodooHDAUserClient" "VoodooHDAEnableHalfMicVolumeFix" = No "VoodooHDAVerboseLevel" = 0 "VoodooHDAEnableVolumeChangeFix" = No "CFBundleIdentifier" = "org.voodoo.driver.VoodooHDA" "IOMatchCategory" = "VoodooHDADevice" "IOAudioDeviceCanBeDefaults" = 7 "MixerValues" = {"iMix"=0,"PCM"=90,"Rec"=70,"iGain"=0} "InhibitCache" = Yes "IOPCIClassMatch" = "0x04030000&0xffff0000" } +-o VoodooHDADevice <class VoodooHDADevice, id 0x10000028e, registered, matched, active, busy 0 (235 ms), retain 11> { "IOClass" = "VoodooHDADevice" "Boost" = 0 "AllowMSI" = Yes "VoodooHDAEnableMuteFix" = No "IOAudioDeviceName" = "VoodooHDADevice3b56" "IOAudioDeviceModelID" = "VoodooHDA:3b56 " "IOAudioDeviceShortName" = "VoodooHDA " "NodesToPatch" = () "Noise" = 0 "VoodooHDAEnableHalfVolumeFix" = No "IOProviderClass" = "IOPCIDevice" "IOAudioDeviceManufacturerName" = "Voodoo " "IOAudioDeviceTransportType" = 1651274862 "IOPowerManagement" = {"DriverPowerState"=1,"MaxPowerState"=1,"CurrentPowerState"=1} "Vectorize" = No "IOProbeScore" = 0 "IOUserClientClass" = "VoodooHDAUserClient" "VoodooHDAEnableHalfMicVolumeFix" = No "VoodooHDAVerboseLevel" = 0 "VoodooHDAEnableVolumeChangeFix" = No "CFBundleIdentifier" = "org.voodoo.driver.VoodooHDA" "IOMatchCategory" = "VoodooHDADevice" "IOAudioDeviceCanBeDefaults" = 7 "MixerValues" = {"iMix"=0,"PCM"=90,"Rec"=70,"iGain"=0} "InhibitCache" = Yes "IOPCIClassMatch" = "0x04030000&0xffff0000" } second device is main. I've tried too enable halfvolumefix to no avail, so left it as it was before. Any ideas?
  2. arkstone

    Ati HD5450 and HDMI

    Artur-pt, yeah, that did it, tried AtiConfig=Vervet and everything works now. It just I've tried it before - but as I was using UseAtiRom it failed (later it became clear that I was using wrong rom file - that's why it failed - but now I'm no using rom file at all, so everything is fine), thanks!
  3. arkstone

    Ati HD5450 and HDMI

    Hi all! I have Ati 5450 card, MSI R5450-MD512H/D2, I've managed to enable QE/CI with "GraphicsEnabler=Yes" and putting vendor/device id's into Info.plist in ATI5000Controller.kext / /ATIRadeonX3000.kext, everything works fine, but I can't enable HDMI port on this card. bdmesg from chimera (chimera v. 1.10) says: TI Framebuffer Addr: @0xD0000000 MMIO Addr: @0xFBEE0000 I/O Port Addr: @0x0000D000 ROM Addr: @0xFBEC0000 ATI card POSTed, reading Video BIOS from legacy space Card reported ports: 0 Framebuffer set to: <F3><EE> using device's default. Number of ports set to: 0 using framebuffer's default. ATI Radeon HD 5400 Series 512MB [1002:68f9] (subsys [1462:2173]) (Cedar:<F3><EE>) :: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) kextstat: bash-3.2# kextstat | grep -i ati 21 0 0xffffff7f81abd000 0x8000 0x8000 com.apple.nke.applicationfirewall (3.2.30) <7 6 5 4 3 1> 81 2 0xffffff7f81274000 0x18a000 0x18a000 com.apple.kext.ATISupport (7.1.8) <67 9 8 7 5 4 3 1> 82 0 0xffffff7f81753000 0x3e000 0x3e000 com.apple.kext.ATI5000Controller (7.1.8) <81 67 9 8 5 4 3 1> 86 0 0xffffff7f813fe000 0x29b000 0x29b000 com.apple.ATIRadeonX3000 (7.1.8) <72 67 9 7 6 5 4 3 1> 87 0 0xffffff7f8173c000 0x12000 0x12000 com.apple.kext.ATIFramebuffer (7.1.8) <81 67 9 8 7 5 4 3 1> Is it even possible to enable HDMI output (I want to connect second monitor, but both monitors has only DVI inputs, and as card has DVI/VGA/HDMI - the only way to connect second monitor is to connect it via HDMI) on this card and if it possible - how can I do it?
  4. arkstone

    8800GTX EFI String, QE/CI not working with 10.5.5

    Ok I've found solution. It was THAT simple. You just need to add your device ID to Info.plist in following kexts: add device id string (my was 0x060010de) to GeForce.kext add this string: "&0xfff8ffff 0x060010de" (psate your device id instead of my) to string: <key>IOPCIPrimaryMatch</key> <string>"bla-blah-other-device-ids &0xfff8ffff you_dev_id"</string> in NVDAResman.kext reboot and enjoy working QE/CI Beware - I've made it with 1.5.30.17 drivers which comes with 10.5.5 update.
  5. arkstone

    8800GTX EFI String, QE/CI not working with 10.5.5

    I've tried different EFI strings, one generated by myself from this tuttorial: http://forum.netkas.org/index.php?topic=222.0 then tried EFIStudio and none worked. It shows correct values in System Profiler, but no QE/CI enabled. Also resolution change works fine. I've checked system for any old kexts and none found (but I'm curios - NvKush installed GeForce kextxs - do I need to delete it too? Is there any GeForce kextxs in update package (in 10.5.5 package)?
  6. arkstone

    10.5.5 Graphics Driver Improvements?

    adrock42, do you use your gfx card with EFI strings or something else? It just my 8800 GTS 512Mb won't work after update (meaning it works, just without QE/CI).
  7. arkstone

    8800GTX EFI String, QE/CI not working with 10.5.5

    Same here with 8800 GTS 512Mb... previously used NvKush with Leo4all v4.1 (10.5.4) and it worked smoothly. After update nvkush ceased to work, removed it and tried EFI strings with no success either. Alo tried nvinject 0.2.1 with same results... Solution anyone? P.S. I will continue my efforts to find a solution myself and if I find one I will post it here..
×