Jump to content

Snow Leopard on ASUS G51Jx-X3


gravicle
 Share

56 posts in this topic

Recommended Posts

I couldn't really find anywhere the one you mentioned, what exactly is a pain in the butt about the external one? Also you said something about warranty, would I lose my warranty if I did it your way? I only got the laptop yesterday...

 

edit: like drjman I had to use nawcom boot cd instead of empire efi, now installing snow leopard retail. You might want to add nawcom boot cd to the tutorial.

 

edit: made lots of progress with help from nawcom, os x installed just fine from the retail dual layer dvd but after it was done I couldn't boot into it. I had to boot into with the nawcom cd and single user and then I had to type all this to deleted voodoohda:

 

sh /usr/local/bin/voodoohda-uninstall

then: fixkext

then: reboot

 

I'm now in snow leopard (booted with nawcom cd) and thinking about starting to do all the nasty DSDT stuff and all I have to do, to boot normally without cd.

 

edit: I did the DSDT and all that and now preparing to update to 10.6.4, gravicle, the link for AsereBLN Booter is kinda broken, here's a good link: http://www.kexts.com/view/266-aserebln_booter.html

 

edit: I installed 10.6.4 and then AsereBLN following your instructions exactly and then restarted and now I can only boot with the nawcom cd back into snow leopard, please help...this is what I get and just sits there:

 

post-261772-1293432321_thumb.jpg

 

I can boot just fine with the nawcom cd and it's on 10.6.4 but I still don't have the video card installed properly either. (low res, no qe, etc)

 

edit: I updated to 10.6.5 and before restarting I used the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] from tonymac (http://tonymacx86.blogspot.com/2010/04/[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]-[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]-install-mac-os-x-on.html) with UserDSDT option and DSDT.aml on my desktop and things started to just work!! I even have wifi working, full hd res, battery percentage. I installed the voodoo hda from you and couldn't boot but I booted with nawcom's cd (it let me) and then without cd and -f and it's started to boot again normally without anything and I have sound working.

 

 

>>>LAST EDIT<<<:

So right now I have everything working except sleep (doesn't work for some reason). Also no 64 bit kernel and extensions but these are not big issues (hope to fix them soon and please help if you have any ideas), I can pretty much say I have a fully working hackintosh. :wacko:

 

sublast edit: I had a fat32 partition reserved for windows, I installed windows 7 on it, formated that partition to ntfs during setup, everything went smoothly and then I booted back into os x with the nawcom cd to set os x parition active so I can boot into os x too (following this tutorial step 5 http://lifehacker.com/5698205/how-to-tripl...dows-and-linux) and now I can boot into os x normally just like before installing windows and chameleon recognizes the windows partition but if I try to boot into it I get this: http://i.imgur.com/2Oc9J.jpg The windows setup dvd has zero effect on anything, doesn't fix anything, doesn't even recognize the windows install (all I did in windows was install an antivirus).

 

subsublast edit: I went the easybcd route, installed easybcd in windows and added os x (mbr) and everything is beautiful. :)

 

last edit: (for real now) I created a thread for my laptop specifically http://www.insanelymac.com/forum/index.php...=0#entry1612245

Link to comment
Share on other sites

Gravicle,

 

Spent hours reading through these forums and turned google upside down looking for a good thread specific to my machine but it seems I am the only one with this laptop, or at least the only one trying to put mac on it.

I noticed the machine in your tutorial is similar to mine and decided to give it a go. I'm using NawComBootCD which worked on the first shot. I am also using a 10.6.3 OEM Mac CD, which I am borrowing from my local 15inch MacBookPro User.

th_IMG_20110102_040546.jpg

I'm guessing this is the culprit to the following problem... MacInstaller loads fine and even gives me a native looking resolution, and my battery status. Once I select my language, I get the "MacOSX cannot be installed on this computer" MessageBox.

th_IMG_20110102_033642.jpg

I select Restore from backup just for kicks, this allows me to access DiskUtility, Terminal, SystemProfiler ect... I look into DiskUtility and my HardDisk is present and formatted with MacOSExtendedJournaled, GUID Partition Table, ect...

th_IMG_20110102_033846.jpg

notice the connection type is considered an external when it is in-fact internal.

I have no idea where to go from here. I'm hoping you don't mind helping out a noob.

I'm not really a noob, I've installed a distro of Kalaway before on my HP DV6k, but everyone and their poodle had that computer, very easy to find forums on it.

Here are a few more pics that might prove themselves to be useful:

th_IMG_20110102_041044.jpg

th_IMG_20110102_041023.jpg

Sorry but my Driod is my only means of taking pics.

by the way my BIOS is the latest version for this model; 207

Thanks in advanced!

Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...

Do you have VoodooHDA 2.7.2 with Pref Pane 11 working in OSX 10.6.6? For some odd reason my Audio stopped working?

 

VoodooHDA 2.6.2 works fine but with a prior release of PrefPane as it does not work with PrefPane verson 11.

Link to comment
Share on other sites

Do you have VoodooHDA 2.7.2 with Pref Pane 11 working in OSX 10.6.6? For some odd reason my Audio stopped working?

 

VoodooHDA 2.6.2 works fine but with a prior release of PrefPane as it does not work with PrefPane verson 11.

 

Yes. Upgrading to 10.6.6 changed absolutely nothing on my rig, and definitely did not break any kext. You may want to boot with -f flag for once, probably reapir the permissions a couple of times. It may be just the kext not loading on boot. Use kextspy to find out if its loaded.

 

You may consider reinstalling the kext. Now, the VoodooHDA project has an official installer on the project page. Check it out here.

 

Keep us posted.

Link to comment
Share on other sites

  • 2 months later...

Got 10.6.7 running with this laptop. Still working out stability issues. Recently been panicking about 5-10 minutes into vmware fusion / flash. QC/QE 1920 with HDMI running but card name not detected. Got two finger scrolling working with good synaptic drivers as well as audio on lock down.

 

Here is a log from a recent boot

May 8 03:55:16 localhost kernel[0]: npvhash=4095

May 8 03:55:16 localhost kernel[0]: PAE enabled

May 8 03:55:16 localhost kernel[0]: 64 bit mode enabled

May 8 03:55:16 localhost kernel[0]: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386

May 8 03:55:16 localhost kernel[0]: vm_page_bootstrap: 2029727 free pages and 51041 wired pages

May 8 03:55:16 localhost kernel[0]: standard timeslicing quantum is 10000 us

May 8 03:55:16 localhost kernel[0]: mig_table_max_displ = 73

May 8 03:55:16 localhost kernel[0]: NullCPUPowerManagement::init: properties=0xbafc880

May 8 03:55:16 localhost kernel[0]: NullCPUPowerManagement::start

May 8 03:55:16 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled

May 8 03:55:16 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled

May 8 03:55:16 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled

May 8 03:55:16 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled

May 8 03:55:16 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled

May 8 03:55:16 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled

May 8 03:55:16 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled

May 8 03:55:16 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled

May 8 03:55:16 localhost kernel[0]: calling mpo_policy_init for Quarantine

May 8 03:55:16 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)

May 8 03:55:16 localhost kernel[0]: calling mpo_policy_init for Sandbox

May 8 03:55:16 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)

May 8 03:55:16 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet

May 8 03:55:16 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)

May 8 03:55:16 localhost kernel[0]: Copyright © 1982, 1986, 1989, 1991, 1993

May 8 03:55:16 localhost kernel[0]: The Regents of the University of California. All rights reserved.

May 8 03:55:16 localhost kernel[0]: MAC Framework successfully initialized

May 8 03:55:16 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers

May 8 03:55:16 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87

May 8 03:55:16 localhost kernel[0]: ACPI: System State [s0 S3 S4 S5] (S3)

May 8 03:55:16 localhost kernel[0]: RTC: Only single RAM bank (128 bytes)

May 8 03:55:16 localhost kernel[0]: netkas presents fakesmc, a kext which emulates smc device

May 8 03:55:16 localhost kernel[0]: VoodooBattery.kext: VoodooBattery.kext 1.2.11 (Release) Sep 5 2009 00:31:34 [1060]

May 8 03:55:16 localhost kernel[0]: VoodooBattery.kext: Snow Leopard Pre-release © 2009 Superhai, All Rights Reserved

May 8 03:55:16 localhost kernel[0]: FireWire runtime power conservation disabled. (2)

May 8 03:55:16 localhost kernel[0]: FireWire (OHCI) VendorID 1180 ID e832 PCI now active, GUID 001e8c0000d3a197; max speed s400.

May 8 03:55:16 localhost kernel[0]: USBMSC Identifier (non-unique): 07AB0B013A504349 0x13fe 0x3100 0x100

May 8 03:55:16 localhost kernel[0]: mbinit: done (64 MB memory set for mbuf pool)

May 8 03:55:16 localhost kernel[0]: From path: "uuid",

May 8 03:55:16 localhost kernel[0]: Waiting for boot volume with UUID EA7A66F8-0FF3-3DB3-8D69-9131AB9D3664

May 8 03:55:16 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

May 8 03:55:16 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start

May 8 03:55:16 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded

May 8 03:55:16 localhost kernel[0]: 2.3.09 Little Snitch: starting

May 8 03:55:16 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,2/AppleIntel5SeriesAHCI/CHN0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/OCZ-VERTEX2 Media/IOGUIDPartitionScheme/OSX@2

May 8 03:55:16 localhost kernel[0]: BSD root: disk0s2, major 14, minor 4

May 8 03:55:16 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 958976 to: 7642624 (joffset 0x1bf000)

May 8 03:55:16 localhost kernel[0]: jnl: unknown-dev: journal replay done.

May 8 03:55:16 localhost kernel[0]: hfs: Removed 1 orphaned / unlinked files and 0 directories

May 8 03:55:17 localhost kernel[0]: AtherosL1cEthernet: Ethernet address 48:5b:39:3d:c6:83

May 8 03:55:17 localhost kernel[0]: systemShutdown false

May 8 03:55:21 localhost kernel[0]: Refusing new kext com.apple.iokit.IONetworkingFamily, v1.10: already have loaded v1.9.

May 8 03:55:21: --- last message repeated 1 time ---

May 8 03:55:21 localhost kernel[0]: Atheros: mac 192.2 phy 14.0 radio 12.0

May 8 03:55:22 localhost kernel[0]: Waiting for DSMOS...

May 8 03:55:22 localhost kernel[0]: Previous Shutdown Cause: 0

May 8 03:55:22 localhost kernel[0]: Refusing new kext com.apple.iokit.IONetworkingFamily, v1.10: already have loaded v1.9.

May 8 03:55:23 localhost kernel[0]: NVDANV50HAL loaded and registered.

May 8 03:55:23 localhost kernel[0]: Unable to detect alps

May 8 03:55:23 localhost kernel[0]: ApplePS2Touchpad: Synaptics capabilities query result 0xd0, 0x47, 0x11.

May 8 03:55:23 localhost kernel[0]: ApplePS2Trackpad: Synaptics TouchPad v7.0

May 8 03:55:23 localhost kernel[0]: ApplePS2Trackpad: Detected toucpad controller "Standard TouchPad (TM41xx134)" (ModelID: 0x1C0B3)

May 8 03:55:23 localhost kernel[0]: ApplePS2Trackpad: Initializing resolution to 2159 dpi

May 8 03:55:23 localhost kernel[0]: ApplePS2Trackpad: Compensating for geometry, setting resolution to 1338 dpi

May 8 03:55:23 localhost kernel[0]: ApplePS2Trackpad: Capabilities 53265, 0xD011

May 8 03:55:23 localhost kernel[0]: ApplePS2Trackpad: W Mode Supported :D

May 8 03:55:23 localhost kernel[0]: ApplePS2Trackpad: Palm detection Supported :D

May 8 03:55:23 localhost kernel[0]: ApplePS2Trackpad: Multiple finger detection NOT Supported :)

May 8 03:55:23 localhost kernel[0]: ApplePS2Trackpad: Using peak detection method

May 8 03:55:23 localhost kernel[0]: VoodooHDADevice[0x6b957000]::init

May 8 03:55:23 localhost kernel[0]: Enabling input audio routing switching at node 24:

May 8 03:55:23 localhost kernel[0]: Enabling input audio routing switching at node 26:

May 8 03:55:23 localhost kernel[0]: Enabling output audio routing switching at node 33:

May 8 03:55:23 localhost kernel[0]: Pin sense: cad 0 nid=24 res=0

May 8 03:55:23 localhost kernel[0]: switch nid 11 conn 0 off

May 8 03:55:23 localhost kernel[0]: mute nid 11 conn 0 off

May 8 03:55:23 localhost kernel[0]: switch nid 11 conn 1 on

May 8 03:55:23 localhost kernel[0]: mute nid 11 conn 1 on

May 8 03:55:23 localhost kernel[0]: switch nid 11 conn 2 on

May 8 03:55:23 localhost kernel[0]: mute nid 11 conn 2 off

May 8 03:55:23 localhost kernel[0]: switch nid 35 conn 0 off

May 8 03:55:23 localhost kernel[0]: mute nid 35 conn 0 off

May 8 03:55:23 localhost kernel[0]: switch nid 35 conn 1 on

May 8 03:55:23 localhost kernel[0]: mute nid 35 conn 1 on

May 8 03:55:23 localhost kernel[0]: switch nid 35 conn 2 on

May 8 03:55:23 localhost kernel[0]: mute nid 35 conn 2 off

May 8 03:55:23 localhost kernel[0]: switch nid 35 conn 8 off

May 8 03:55:23 localhost kernel[0]: mute nid 35 conn 8 on

May 8 03:55:23 localhost kernel[0]: setDesc change description Microphone (CD) channel 2 assoc 2

May 8 03:55:23 localhost kernel[0]: Pin sense: cad 0 nid=26 res=0

May 8 03:55:23 localhost kernel[0]: switch nid 11 conn 0 on

May 8 03:55:23 localhost kernel[0]: mute nid 11 conn 0 off

May 8 03:55:23 localhost kernel[0]: switch nid 11 conn 1 on

May 8 03:55:23 localhost kernel[0]: mute nid 11 conn 1 on

May 8 03:55:23 localhost kernel[0]: switch nid 11 conn 2 off

May 8 03:55:23 localhost kernel[0]: mute nid 11 conn 2 off

May 8 03:55:23 localhost kernel[0]: switch nid 35 conn 0 on

May 8 03:55:23 localhost kernel[0]: mute nid 35 conn 0 off

May 8 03:55:23 localhost kernel[0]: switch nid 35 conn 1 on

May 8 03:55:23 localhost kernel[0]: mute nid 35 conn 1 on

May 8 03:55:23 localhost kernel[0]: switch nid 35 conn 2 off

May 8 03:55:23 localhost kernel[0]: mute nid 35 conn 2 off

May 8 03:55:23 localhost kernel[0]: switch nid 35 conn 8 off

May 8 03:55:23 localhost kernel[0]: mute nid 35 conn 8 on

May 8 03:55:23 localhost kernel[0]: setDesc change description Microphone (CD) channel 2 assoc 2

May 8 03:55:23 localhost kernel[0]: Pin sense: cad 0 nid=33 res=0

May 8 03:55:23 localhost kernel[0]: setDesc change description Speaker (CD) channel 0 assoc 0

May 8 03:55:23 localhost kernel[0]: Sound assertion "!fProvider->open ( this )" failed in "/SourceCache/AppleHDA/AppleHDA-199.4.12/AppleHDAController/AppleHDAController.cpp" at line 317 goto Exit

May 8 03:55:24 localhosts-Mac kernel[0]: AirPort_AthrFusion21: Ethernet address 1c:4b:d6:a7:1b:3b

May 8 03:55:24 localhosts-Mac kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification

May 8 03:55:24 localhosts-Mac kernel[0]: IO80211Interface::efiNVRAMPublished():

May 8 03:55:24 localhosts-Mac kernel[0]: ATHR: unknown locale: 60

May 8 03:55:24 localhosts-Mac kernel[0]: IOBluetoothBNEPDriver: Ethernet address 00:25:d3:b0:7d:54

May 8 03:55:24 localhosts-Mac kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).

May 8 03:55:25 localhosts-Mac kernel[0]: setWOW_PARAMETERS:wowevents = 2(1)

May 8 03:55:25 localhosts-Mac kernel[0]: ATHR: unknown locale: 60

May 8 03:55:25 localhosts-Mac kernel[0]: setWOW_PARAMETERS:wowevents = 2(1)

May 8 03:55:27 localhosts-Mac kernel[0]: FakeSMC: key info not found MSDS, length - 6

May 8 03:55:25 localhosts-Mac kernel[0]: ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out

May 8 03:55:25 localhosts-Mac kernel[0]: DSMOS has arrived

May 8 03:55:25 localhosts-Mac kernel[0]: FakeSMC: key not found BEMB, length - 1

May 8 03:55:26 localhosts-Mac kernel[0]: Warning - kext com.vmware.kext.vmx86 has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.

May 8 03:55:26 localhosts-Mac kernel[0]: vmmon: Loaded @ 0x843f115c: Info 0x843fed40 Name com.vmware.kext.vmx86 Version 3.1.2 build-332101 at Nov 30 2010 16:05:54

May 8 03:55:26 localhosts-Mac kernel[0]: vmmon: Service start

May 8 03:55:26 localhosts-Mac kernel[0]: vmmon: Instrumenting bug 151304...

May 8 03:55:26 localhosts-Mac kernel[0]: vmmon: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0

May 8 03:55:26 localhosts-Mac kernel[0]: vmmon: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0

May 8 03:55:26 localhosts-Mac kernel[0]: vmmon: Cycles 60

May 8 03:55:26 localhosts-Mac kernel[0]: vmmon: Module initialized.

May 8 03:55:26 localhosts-Mac kernel[0]: vmmon: Registering for power state changes

May 8 03:55:26 localhosts-Mac kernel[0]: vmmon: Fast clock thread started.

May 8 03:55:26 localhosts-Mac kernel[0]: Starting DoubleCommand

May 8 03:55:26 localhosts-Mac kernel[0]: Hijacking keyboard 0 (ApplePS2Keyboard)

May 8 03:55:26 localhosts-Mac kernel[0]: kea 834E313C: ksea 834E2F7A

May 8 03:55:26 localhosts-Mac kernel[0]: modded kea 7A160924: modded ksea 7A160A7C

May 8 03:55:26 localhosts-Mac kernel[0]: DoubleCommand does not support AsusHotkeys

May 8 03:55:26 localhosts-Mac kernel[0]: vboxdrv: fAsync=0 offMin=0x13a1 offMax=0x1e18

May 8 03:55:26 localhosts-Mac kernel[0]: VBoxDrv: version 4.0.2 r69518; IOCtl version 0x160000; IDC version 0x10000; dev major=20

May 8 03:55:26 localhosts-Mac kernel[0]: vmci: Loaded @ 0x7a43815c: Info 0x7a441fa0 Name com.vmware.kext.vmci Version 3.1.2 build-332101 at Nov 30 2010 16:05:55

May 8 03:55:26 localhosts-Mac kernel[0]: vmci: Initializing module.

May 8 03:55:26 localhosts-Mac kernel[0]: vmci: VMCI: Driver initialized.

May 8 03:55:26 localhosts-Mac kernel[0]: vmci: Module initialized.

May 8 03:55:26 localhosts-Mac kernel[0]: vmioplug: Loaded @ 0x83b6315c: Info 0x83b676c0 Name com.vmware.kext.vmioplug Version 3.1.2 build-332101 at Nov 30 2010 16:05:57

May 8 03:55:27 localhosts-Mac kernel[0]: VBoxFltDrv: version 4.0.2 r69518

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Loaded @ 0x83e5c15c: Info 0x83e647c0 Name com.vmware.kext.vmnet Version 3.1.2 build-332101 at Nov 30 2010 16:05:56

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Initializing module.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNet_Start allocated gOSMallocTag.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNet_Start allocated vnetBigLock.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNet_Start allocated vnetPeerLock.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Module initialized.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VNetUserIf_Create: created userIf at 0xe372a00.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNetConnect: returning port 0xe372a00

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Hub 0 does not exist, allocating memory.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Allocated hub 0xe379000 for hubNum 0.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Setting peer info for hub: 0, port: 0, rcv: TRUE, flags: 64

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:f2:ae:31

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Hub 0

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Port 0

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: bridge-en0: media 20 dev 0xc5a6804 family 2

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: bridge-en0: up

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: bridge-en0: attached

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Invalidating peer info for hub: 0, port: 0

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VNetUserIfFree: freeing userIf at 0xe372a00.

May 8 03:55:27 localhosts-Mac kernel[0]: VBoxAdpDrv: version 4.0.2 r69518

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VNetUserIf_Create: created userIf at 0xe372900.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNetConnect: returning port 0xe372900

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Hub 1 does not exist, allocating memory.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Allocated hub 0xe382000 for hubNum 1.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Setting peer info for hub: 1, port: 0, rcv: TRUE, flags: 64

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:f6:c7:e7

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Hub 1

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Port 0

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Setting peer info for hub: 1, port: 0, rcv: TRUE, flags: 67

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VNetUserIf_Create: created userIf at 0xe372400.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNetConnect: returning port 0xe372400

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Setting peer info for hub: 1, port: 1, rcv: TRUE, flags: 64

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:eb:d6:08

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Hub 1

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Port 0

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Port 1

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Invalidating peer info for hub: 1, port: 1

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VNetUserIfFree: freeing userIf at 0xe372400.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: netif-vmnet1: Adding protocol 2.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VNetUserIf_Create: created userIf at 0xe372200.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNetConnect: returning port 0xe372200

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Hub 8 does not exist, allocating memory.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Allocated hub 0xe386000 for hubNum 8.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Setting peer info for hub: 8, port: 0, rcv: TRUE, flags: 64

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:f9:8b:3a

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Hub 8

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Port 0

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Setting peer info for hub: 8, port: 0, rcv: TRUE, flags: 67

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VNetUserIf_Create: created userIf at 0xe372600.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNetConnect: returning port 0xe372600

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Setting peer info for hub: 8, port: 1, rcv: TRUE, flags: 64

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:f7:28:7b

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Hub 8

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Port 0

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Port 1

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Setting peer info for hub: 8, port: 1, rcv: TRUE, flags: 64

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Setting peer info for hub: 8, port: 1, rcv: TRUE, flags: 579

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VNetUserIf_Create: created userIf at 0xe372100.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNetConnect: returning port 0xe372100

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Setting peer info for hub: 8, port: 2, rcv: TRUE, flags: 64

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:eb:38:97

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Hub 8

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Port 0

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Port 1

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Port 2

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: Invalidating peer info for hub: 8, port: 2

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: VNetUserIfFree: freeing userIf at 0xe372100.

May 8 03:55:27 localhosts-Mac kernel[0]: vmnet: netif-vmnet8: Adding protocol 2.

May 8 03:55:31 localhosts-Mac kernel[0]: ATHR: unknown locale: 60

May 8 03:55:35 localhosts-Mac kernel[0]: BootCache: hit rate below threshold (7290 hits on 14581 lookups)

Link to comment
Share on other sites

 Share

×
×
  • Create New...