toolbox1234 Posted April 28, 2010 Share Posted April 28, 2010 The injected NVCAP value is wrong. Use NVEnabler instead of NVInject. Thanks. NVEnabler ( http://www.kexts.com/view/118-snow_leopard_nvenabler.html )got me a step further. Now I have video on my VGA and HDMI, just not the DVI port. UPDATE: After I removed the VGA cable and reboot, I got signal at the DVI port but HDMI signal is gone also. Link to comment Share on other sites More sharing options...
toolbox1234 Posted April 29, 2010 Share Posted April 29, 2010 Something crazy is going on in my PC. I can get video off the DVI port of the 9500GT with NVEnabler but Parallels no longer work. I did uninstall/re-install and the result is still the same. When I start the app, it pops up for a second and then just disappear. If I put my old 7900GS card back in, I am able to run it after uninstall/re-install. Very strange. Does this has something to do with I don't have video on the HDMI port? Link to comment Share on other sites More sharing options...
Beerkex'd Posted April 30, 2010 Share Posted April 30, 2010 No idea. I know lots of people are having trouble with HDMI after updating to 10.5.3. Parallels 5.0 works fine for me. It's possible that Parallels just needs to be reinstalled to detect and work with the newer video card. Maybe deleting the configuration files will work too, if you can find them. The only thing that's important is the hard drive image you use for your virtual machine, and that stays where it is even after uninstalling Parallels, you're not going to lose anything except for the settings and stuff. Let me know if uninstalling and reinstalling Parallels fixes your problem. Link to comment Share on other sites More sharing options...
toolbox1234 Posted April 30, 2010 Share Posted April 30, 2010 uninstall/re-install while the 9500 is in the system did not work. Re-installation ran through without error and it was able to detect the existing Win drive image. Somehow it seems to be crashed when Win VM is starting. Every time I tried to run Parallels, it went through the initial startup but I never see the desktop before the whole thing disappear. Link to comment Share on other sites More sharing options...
VampireMI2 Posted April 30, 2010 Share Posted April 30, 2010 I use 9500GT 512mb and fully working. I edit my DSDT with gfx0 and my NVCAP. This is my code Device (PEGP) { Name (_ADR, 0x00010000) Device (GFX0) { Name (_ADR, Zero) Name (_SUN, One) Method (_DSM, 4, NotSerialized) { Store (Package (0x16) { "@0,compatible", Buffer (0x0B) { "NVDA,NVMac" }, "@0,device_type", Buffer (0x08) { "display" }, "@0,name", Buffer (0x0F) { "NVDA,Display-A" }, "@1,compatible", Buffer (0x0B) { "NVDA,NVMac" }, "@1,device_type", Buffer (0x08) { "display" }, "@1,name", Buffer (0x0F) { "NVDA,Display-B" }, "NVCAP", Buffer (0x18) { /* 0000 */ 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, /* 0008 */ 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, /* 0010 */ 0x00, 0x00, 0x00, 0x00 }, "VRAM,totalsize", Buffer (0x04) { 0x00, 0x00, 0x00, 0x20 }, "device_type", Buffer (0x0D) { "NVDA,Parent" }, "model", Buffer (0x17) { "nVidia GeForce 9500 GT" }, "rom-revision", Buffer (0x2B) { "nVidia GeForce 9500 GT OpenGL Engine [EFI]" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } } and my screen shot Link to comment Share on other sites More sharing options...
adhityamaurer Posted June 14, 2010 Share Posted June 14, 2010 NVenabler work with my pixeview 9500GT Link to comment Share on other sites More sharing options...
GAR1983 Posted July 21, 2010 Share Posted July 21, 2010 Hey guys, a quick question, i have a Zotac 9500GT 1GB vga/hdmi/dvi card, with graphicsenabler=yes in the plist boot, i get full support for the card within OSX, but only VGA output works inside the OS. How can i enable the DVI and hdmi, any help is appreciated. Link to comment Share on other sites More sharing options...
brif8 Posted November 11, 2010 Share Posted November 11, 2010 GAR1983 Did you manage to get more than just VGA ? I have the same card and I'm stuck at the same place just VGA works Thanks Link to comment Share on other sites More sharing options...
fpdesigner Posted April 24, 2012 Share Posted April 24, 2012 i have the same problem now i'm on a HPDC7600 with 10.6.8 installed with NAWCOM boot cd ,but i have the resolution @1024x768 i have tried with osx86tollls but nothing change. I don't know efi I have try nvenabler no success kernel panic my com.apple.boot.plist is very simple I've never used Empire EFI. Just retail installs + nawcom boot cd I need only the DVI port , on leopard work HDMI , DVI and VGA. Link to comment Share on other sites More sharing options...
fpdesigner Posted April 26, 2012 Share Posted April 26, 2012 i have a hpdc7600 + Asus Geforce 9500 gt 1gb , and i can't have QE/CI i have GraphicsEnabler=Yes unde 10.6.8 Installation Osx Sl dvd retail+nawcon Someone can give me a solution. I have changed only the resolution, 120x1024x32 no other setting on DVI port I have this file in the extension NVSMU.kext NVDAResman.kext NVDANV50Hal.kext NVDANV40Hal.kext this is com.apple.Boot.plist my setting <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>GraphicsEnabler</key> <string>Yes</string> <key>Graphics Mode</key> <string>1280x1024x32</string> <key>Kernel</key> <string>legacy_kernel</string> <key>Kernel Flags</key> <string>arch=i386</string> <key>Timeout</key> <string>5</string> </dict> </plist> Please a solution i have find this in extension GeForceVADriver.bundle GeForceGLDriver.bundle GeForceGA.plugin GeForce7xxxGLDriver.bundle Someon have some experience with Asus Geforce 9500 gt 1gb and DVI port thanx Link to comment Share on other sites More sharing options...
Recommended Posts