mittpatel Posted October 31, 2009 Share Posted October 31, 2009 iDeneb 10.5.7 installation My PC hardware config Board : Asus M3N78-EM http://www.asus.com/product.aspx?P_ID=amYCbidk7vhOQLWp CPU AMD Phenom™ II X4 http://products.amd.com/en-us/DesktopCPUDe...p;f11=&f12= 4 GB RAM LG DVD RW+ 500 GB SATA HDD --------------------- Installation method iDeneb 10.5.7 ISO Patches info: + AMD Patch + ACPI Patch + SMBIOS MacPro + Kernel - Voodoo + Fix - Seatbelt + Fix - Voodoo USB Fix + Audio - ALC1200 + Chipset - Apple NforceATA + Network - RealtekR1000 + Video - Nvidia NVinject 256 mb -------------------------------------------------- After installation boot with -v -f Your pc will hang up after a while - reset Now boot with -s at root: type this commands root:: mount -uw / root:: mv /system/library/extensions/NVDAResman.kext /system root:: reboot With next reboot your PC should be working fine with osx --------------------------------------------------------------- I hope this may help you ---------------------------- You can post your question if you have any. ------------------------------------------------ Link to comment https://www.insanelymac.com/forum/topic/195170-ideneb-1057-on-asus-m3n78-em-mother-board/ Share on other sites More sharing options...
@ddi Posted June 26, 2010 Share Posted June 26, 2010 Hello and thanks for sharing results! I have my mate pc which runs the same M3N78-EM mobo she as been on Ubuntu but since I saw that osx86 was possible decided to give it a try and followed your steps. Everything went as you said but in the end I have a working leopard but without the network . Now is there anything I am missing? I have installed the same ideneb 10.5.7 and got puzzled on some things actually: + AMD Patch Cannot find this is it the one called "leopardAMD"? + ACPI Patch thereare 2 of them one is ACPI/ss2 the other ACPI/??? (don't remember) well the network is RealtekR1000 but dunno why it is not there once I get to the point that leopard starts. Any ideas on what shall I do next? Thanks for your time Link to comment https://www.insanelymac.com/forum/topic/195170-ideneb-1057-on-asus-m3n78-em-mother-board/#findComment-1499171 Share on other sites More sharing options...
Neurok Posted September 19, 2010 Share Posted September 19, 2010 You have an Internet connection? you have an Internet connection? Link to comment https://www.insanelymac.com/forum/topic/195170-ideneb-1057-on-asus-m3n78-em-mother-board/#findComment-1551097 Share on other sites More sharing options...
veranyon Posted October 18, 2010 Share Posted October 18, 2010 2 mittpatel >+ AMD Patch there're not some ones. >+ ACPI Patch there're a couple of them. "After installation boot with -v -f Your pc will hang up after a while - reset Now boot with -s at root: type this commands root:: mount -uw / root:: mv /system/library/extensions/NVDAResman.kext /system root:: reboot" after all that changes I'm watching a gray screen only. Link to comment https://www.insanelymac.com/forum/topic/195170-ideneb-1057-on-asus-m3n78-em-mother-board/#findComment-1566118 Share on other sites More sharing options...
duluxe Posted October 20, 2010 Share Posted October 20, 2010 Sorry for hijacking your topic ( but I can' create new topic ) I have iDeneb v1.5 and iATKOS v7 at the moment and my computer specs are : EVEREST Ultimate Edition Version EVEREST v5.50.2100 Benchmark Module 2.5.292.0 Homepage http://www.lavalys.com/ Report Type Quick Report [ TRIAL VERSION ] Computer HOANG-PC Generator Hoang Operating System Microsoft Windows Vista Home Premium 6.0.6001 (Vista RTM) Date 2010-10-20 Time 20:56 Summary Computer: Computer Type ACPI x86-based PC (Mobile) Operating System Microsoft Windows Vista Home Premium OS Service Pack [ TRIAL VERSION ] Internet Explorer 7.0.6001.18000 DirectX DirectX 10.1 Computer Name HOANG-PC User Name Hoang Logon Domain [ TRIAL VERSION ] Date / Time 2010-10-20 / 20:56 Motherboard: CPU Type Mobile DualCore Intel Core 2 Duo T8300, 2600 MHz (13 x 200) Motherboard Name Asus F3000Sg Series Notebook Motherboard Chipset Intel Crestline-PM PM965 System Memory [ TRIAL VERSION ] DIMM1: Transcend JM800QSU-2G 2 GB DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) DIMM3: Kingston 9905295-019.B00LF [ TRIAL VERSION ] BIOS Type AMI (07/24/08) Display: Video Adapter NVIDIA GeForce 9300M G (256 MB) Video Adapter NVIDIA GeForce 9300M G (256 MB) 3D Accelerator nVIDIA GeForce 9300M G Monitor AU Optronics B154PW02 V2 [15.4" LCD] Multimedia: Audio Adapter Realtek ALC660 @ Intel 82801HBM ICH8M - High Definition Audio Controller Storage: IDE Controller Intel® 82801HEM/HBM SATA AHCI Controller IDE Controller Intel® ICH8M Ultra ATA Storage Controllers - 2850 Storage Controller A90ZPNFH IDE Controller Storage Controller Microsoft iSCSI Initiator Disk Drive ST9250827AS (250 GB, 5400 RPM, SATA-II) Optical Drive HL-DT-ST DVDRAM GSA-T20L ATA Device (DVD+R9:4x, DVD-R9:4x, DVD+RW:8x/8x, DVD-RW:8x/6x, DVD-RAM:5x, DVD-ROM:8x, CD:24x/24x/24x DVD+RW/DVD-RW/DVD-RAM) Optical Drive VQ5225O JSJ785A SCSI CdRom Device SMART Hard Disks Status OK Input: Keyboard Keyboard Device Filter Mouse HID-compliant mouse Mouse Synaptics PS/2 Port TouchPad Network: Primary IP Address [ TRIAL VERSION ] Primary MAC Address 00-1D-E0-6C-D1-59 Network Adapter Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller (138. [ TRIAL VERSION ]) Network Adapter Bluetooth Device (Personal Area Network) Network Adapter Intel® Wireless WiFi Link 4965AGN (172. [ TRIAL VERSION ]) Network Adapter Juniper Network Connect Virtual Adapter Network Adapter TAP-Win32 Adapter V9 Modem Motorola SM56 Speakerphone Modem Peripherals: Printer Foxit PDF Printer Printer Microsoft XPS Document Writer Printer Send To OneNote 2007 USB1 Controller Intel 82801HBM ICH8M - USB Universal Host Controller USB1 Controller Intel 82801HBM ICH8M - USB Universal Host Controller USB1 Controller Intel 82801HBM ICH8M - USB Universal Host Controller USB1 Controller Intel 82801HBM ICH8M - USB Universal Host Controller USB1 Controller Intel 82801HBM ICH8M - USB Universal Host Controller USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller USB Device AuthenTec Inc. AES1610 USB Device Generic Bluetooth Adapter USB Device TV tuner device USB Device USB 2.0 1.3M UVC WebCam USB Device USB Human Interface Device Battery Microsoft AC Adapter Battery Microsoft ACPI-Compliant Control Method Battery DMI: DMI BIOS Vendor American Megatrends Inc. DMI BIOS Version 306 DMI System Manufacturer ASUSTeK Computer Inc. DMI System Product F3Sg DMI System Version 1.0 DMI System Serial Number [ TRIAL VERSION ] DMI System UUID [ TRIAL VERSION ] DMI Motherboard Manufacturer ASUSTeK Computer Inc. DMI Motherboard Product F3Sg DMI Motherboard Version 1.0 DMI Motherboard Serial Number [ TRIAL VERSION ] DMI Chassis Manufacturer ASUSTeK Computer Inc. DMI Chassis Version 1.0 DMI Chassis Serial Number [ TRIAL VERSION ] DMI Chassis Asset Tag [ TRIAL VERSION ] DMI Chassis Type Notebook The names of actual companies and products mentioned herein may be the trademarks of their respective owners. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Could anybody recommend which options/patch I should pick when I install Another question if anybody can answer it , I would very much appreciate : At the moment I'm using GRUB as bootloader . If I am not mistaken , after install OSX86, Chameleon will override it . So how to backup GRUB and restore it after installing OSX86 ? ( I may have to run to Linux forum to ask this question ) Link to comment https://www.insanelymac.com/forum/topic/195170-ideneb-1057-on-asus-m3n78-em-mother-board/#findComment-1567117 Share on other sites More sharing options...
veranyon Posted October 22, 2010 Share Posted October 22, 2010 I can run that one with topickstarter's "hints" (safemode (-x)), and after it I can run that OS without safe mode (diskutil repairpermissions /; reboot #as root), but when I start that OS in normal mode so my ethernet and sound card hadn't show. bluetooth only (nework devices). Also videocard doesn't work in quatz (or quardz))) mode. I try remove extensions.kext and reeeboot. nothing. Bluetooth view my devices, but can't connected to them (watching some information from them very long time only). Remembering "Jas distributives' time". Then people mades distros (hackintosh 10.4.x) better (other generation of people?) and manuals was greater. The Time of iDeneb distros not best time. As I think that "developers" was solved of Apple company and now staying ... sorry. Link to comment https://www.insanelymac.com/forum/topic/195170-ideneb-1057-on-asus-m3n78-em-mother-board/#findComment-1568440 Share on other sites More sharing options...
Recommended Posts