nemduma Posted December 23, 2008 Share Posted December 23, 2008 Hey guys, First, sorry if it was posted and i didnt find it, im new here, and a noob. Once, i managed to install and use Mac OS X 10.4.8 [JaS AMD-Intel-SSE2-SSE3 with PPF1 & PPF2 on my old PC and i loved it. Since then, i have new PC and no luck with any kind of OSx86 now, i got iDeneb v1.3 10.5.5 managed to install it on a single IDE HDD, but it wont boot. I can see the grey screen, the mac logo, a rotating 'cursor" but it just wont boot. QuadCore Intel Core 2 Extreme QX6700 Abit IP35 Pro Memory OCZ 4096 MB (DDR2-800 DDR2 SDRAM) VGA NVIDIA GeForce GTX 260 (896 MB) 1 single IDE HDD (wb 80 gb) 1 IDE dvd rom (memorex) Any help, info, trick would be appreciated Thank you very much. Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/ Share on other sites More sharing options...
wallabee Posted December 23, 2008 Share Posted December 23, 2008 Same here. I found this posting (http://forum.insanelymac.com/index.php?showtopic=137503&st=0&p=973109entry973109) where I posted the following: iDeneb v1.3 still not installing properly. Ran install without custom, as suggested. Tried booting with -s. Got to a black screen with the following: npvhas=4095 hi mem tramps at 0xffe00000 PAE enabled 64 bit mode enabled Darwin Kernel Version 9.5.0: Wed Sep 4 11:29:43 PDT 2008; root:xnu-1228.7.58~1/RELEASE_I386 standard timeslicing quantum is 10000 us vm_page_bootstrap: 974751 free pages and 73825 wired pages mig_table_max_displ = 79 Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. AppleACPICPU: ProcessorApicId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorApicId=2 LocalApicId=1 Enabled Loading security extension com.apple.security.seatbelt calling mpo_policy_init for mb Seatbelt MACF policy initialized Security policy loaded: Seatbely Policy (mb) Loading security extension com.apple.nke.applicationfirewall Loading security extension com.apple.security.TMSafetyNet calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All Rights Reserved. MAC Framework successfully initialized using 16384 buffer headers and 4096 cluder IO buffer headers After this nothing happens. Keyboard is unresponsive and I can do is boot again to the same thing. I have an Asus x83vm-x1 laptop (from BB): Intel Core 2 duo, centrino 2, 2.26 GHz, 4Gb Ram PC5300 DDR2, System Bus 1066, Graphics Card nvidia GeForce 9600M GS 1 GB GDDR3, Azalia audio chip, etc. (the rest can be found on http://www.bestbuy.com/site/olspage.jsp?sk...=1218012612475) I'd appreciate anyone's help. Thanks. Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1010793 Share on other sites More sharing options...
nemduma Posted December 23, 2008 Author Share Posted December 23, 2008 i started with the -s and: Waiting for boot volume with UUID 68------------------8E Waiting on <dict ID"0"><key>IOProviderclass</ey><string ID"1">IOResources</string><key>IOresorursecMatch>/key><sring ID"2">boot-uuid-media</string><dict> Still waiting for root device Still waiting for root device Still waiting for root device Still waiting for root device Still waiting for root device Anybody? Thank you! Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1010895 Share on other sites More sharing options...
ameris_cyning Posted December 23, 2008 Share Posted December 23, 2008 Hey guys, First, sorry if it was posted and i didnt find it, im new here, and a noob. Once, i managed to install and use Mac OS X 10.4.8 [JaS AMD-Intel-SSE2-SSE3 with PPF1 & PPF2 on my old PC and i loved it. Since then, i have new PC and no luck with any kind of OSx86 sad.gif now, i got iDeneb v1.3 10.5.5 managed to install it on a single IDE HDD, but it wont boot. I can see the grey screen, the mac logo, a rotating 'cursor" but it just wont boot. QuadCore Intel Core 2 Extreme QX6700 Abit IP35 Pro Memory OCZ 4096 MB (DDR2-800 DDR2 SDRAM) VGA NVIDIA GeForce GTX 260 (896 MB) 1 single IDE HDD (wb 80 gb) 1 IDE dvd rom (memorex) Any help, info, trick would be appreciated Thank you very much. Did you install the JMicron controller kext in the customize installation? Your mobo uses that chipset. Same here. I found this posting (http://forum.insanelymac.com/index.php?showtopic=137503&st=0&p=973109entry973109) where I posted the following: iDeneb v1.3 still not installing properly. Ran install without custom, as suggested. Tried booting with -s. Got to a black screen with the following: npvhas=4095 hi mem tramps at 0xffe00000 PAE enabled 64 bit mode enabled Darwin Kernel Version 9.5.0: Wed Sep 4 11:29:43 PDT 2008; root:xnu-1228.7.58~1/RELEASE_I386 standard timeslicing quantum is 10000 us vm_page_bootstrap: 974751 free pages and 73825 wired pages mig_table_max_displ = 79 Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. AppleACPICPU: ProcessorApicId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorApicId=2 LocalApicId=1 Enabled Loading security extension com.apple.security.seatbelt calling mpo_policy_init for mb Seatbelt MACF policy initialized Security policy loaded: Seatbely Policy (mb) Loading security extension com.apple.nke.applicationfirewall Loading security extension com.apple.security.TMSafetyNet calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All Rights Reserved. MAC Framework successfully initialized using 16384 buffer headers and 4096 cluder IO buffer headers After this nothing happens. Keyboard is unresponsive and I can do is boot again to the same thing. I have an Asus x83vm-x1 laptop (from BB): Intel Core 2 duo, centrino 2, 2.26 GHz, 4Gb Ram PC5300 DDR2, System Bus 1066, Graphics Card nvidia GeForce 9600M GS 1 GB GDDR3, Azalia audio chip, etc. (the rest can be found on http://www.bestbuy.com/site/olspage.jsp?sk...=1218012612475) I'd appreciate anyone's help. Thanks. Google is your friend. Search Google for "using 16384 buffer headers and 4096" This is a common issue that is easily fixable. Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1011148 Share on other sites More sharing options...
nemduma Posted December 23, 2008 Author Share Posted December 23, 2008 HEy, Thanks for the answer. Is there any way that you could tell me what exactly do I need from the custom installation according to my spec? Processor: Intel Core 2 Extreme QX6700 Motherboard: Abit IP35 Pro Video: NVIDIA GeForce GTX 260 Memory: 4GB (4x1GB OCZ XTC Platinum) HDD:1 WD 80GB IDE DVD: Memorex IDE Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1011437 Share on other sites More sharing options...
ameris_cyning Posted December 23, 2008 Share Posted December 23, 2008 The easiest way is for you to select all third party chipset fixes. Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1011461 Share on other sites More sharing options...
Lanceomni Posted December 23, 2008 Share Posted December 23, 2008 You want to make sure that you are always booting with the -v flag until your 100% satisfied with you setup. This puts you in verbose mode instead of the graphic with the spinning wheel. Then if your having issues you can see where the system is hanging and do some research as to how to fix the problem. I can't give you any advice on options to choose except for Do not choose anything that you are not 100% sure will work. Especially graphics drivers. If you don't choose any graphics drivers you will get default graphics which is fine because you can fix this later but if you choose the wrong one or multiple one you are going to have problems. I would suggest keeping a log of which options you choose during installation and what the results were. Once you get into OSX you can modify com.apple.boot.plist and add the -v flag so that you do not need to do this every time. Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1011468 Share on other sites More sharing options...
dparada78 Posted December 25, 2008 Share Posted December 25, 2008 What worked for me after installing iDeneb 10.5.5 was to boot into -s mode and delete all ATI*, NVDA*, Geforce*, and AppleIntelGMA* kexts and then it booted into the intro and worked great. I wasnt getting any kernel panics but it would freeze during boot. i always think you should mess with your video stuff last after everything else is set up and u know you can install osx86. I installed on an IDE drive. DVD drive is master, IDE is slave. -s at boot prompt /sbin/mount -uw / cd /System/Library/Extensions ls rm -rf ATI* rm -rf NVDA* rm -rf AppleIntelGMA* exit Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1013284 Share on other sites More sharing options...
nemduma Posted January 29, 2009 Author Share Posted January 29, 2009 I was looking for the solution since last month, but im unable to find out. Please help me out, and please be detailed. May be its very easy for you, but i dont have any experience on mac (hardware) Like this: "The easiest way is for you to select all third party chipset fixes." But if you could tell me exactly what and how should I do that, ill be so happy, because I don’t have a clue. Thank you very much! Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1060623 Share on other sites More sharing options...
yahonmaizosz Posted January 29, 2009 Share Posted January 29, 2009 Hi guys.. I tried instally iDeneb v1.3 10.5.5 but I get the message "/com.apple.boot.plist" and no matter what I pressed (-v, F8), that particular message continues to exist.. What must I do to proceed?? Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1060732 Share on other sites More sharing options...
nemduma Posted January 29, 2009 Author Share Posted January 29, 2009 plz, anyone? Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1061508 Share on other sites More sharing options...
nemduma Posted January 31, 2009 Author Share Posted January 31, 2009 Here are lots of smart people and no one can help me out? Please! Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1063962 Share on other sites More sharing options...
ricki Posted January 31, 2009 Share Posted January 31, 2009 Nemduma - sometimes you have to search for solutions to problems your as i did. got to apple download security update 2008. boot with -s, install the above file error disappear. Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1064070 Share on other sites More sharing options...
hrdcre Posted December 27, 2009 Share Posted December 27, 2009 HI, i have the same problem. I think it´s the Cpu. With my old p4 3,4 prescott the system runs very well after i installed my new qx6700 cpu with B stepping my hackintosh crashes and crashes again. I wasn´t able to install ideneb &co. again, yet. I hope for an solution in time!! Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1370063 Share on other sites More sharing options...
sjoewert300 Posted December 27, 2009 Share Posted December 27, 2009 Hi guys.. I tried instally iDeneb v1.3 10.5.5 but I get the message "/com.apple.boot.plist" and no matter what I pressed (-v, F8), that particular message continues to exist.. What must I do to proceed?? try to press the Pause/Break (mostly next to PRTSCR) button during the initial BIOS loading, wait a few seconds, and hit Enter.. It sounds weird, but try it!! It worked for me Link to comment https://www.insanelymac.com/forum/topic/142472-ideneb-v13-1055-wont-boot/#findComment-1370350 Share on other sites More sharing options...
Recommended Posts